What is the problem when the door is closed but the system indicates it is not?

How to Break in a New Automatic Transmission Car on the Highway?

Here are the techniques for breaking in a new automatic transmission car on the highway: 1. Keep the car under a certain load, which means you can carry a few passengers or some cargo. 2. Most automatic transmission cars are equipped with a manual mode. If you have enough experience, it's best to start in manual mode. Switch from automatic to manual mode and let the car run for a while. When breaking in on the highway, start in manual mode and shift up one gear at a time. After running approximately 20 kilometers, switch back to D mode. You will clearly feel that the automatic shifting in D mode is different from before, and the car's power will also increase. After switching to D mode, run another 20 kilometers. At that point, the car will be truly broken in on the highway, and you can clearly feel the difference. 3. After breaking in on the highway and ensuring the fuel injectors are properly atomized, the car will become very fuel-efficient. Precautions for breaking in an automatic transmission car on the highway: 1. Breaking in on the highway must be done after the break-in period and after changing the oil. During the break-in period, the oil contains many tiny metal particles. If the engine runs at high speeds, it can damage the cylinder walls, so this needs to be noted. 2. Breaking in on the highway does not mean pushing the engine to its maximum speed. Instead, it involves matching each gear with the engine's RPM. Taking a manual transmission as an example, maintain second gear at around 4,000 RPM for 3-5 minutes, then third gear at around 4,000 RPM for 3-5 minutes, and so on. However, in higher gears, remember not to accelerate further once the speed reaches 120 km/h to ensure driving safety. Repeat this cycle 3-4 times, and the entire process can be concluded. 3. If the car is an automatic transmission model but has a manual mode, you can try breaking in on the highway. Otherwise, it is unnecessary because the gear changes in an automatic transmission are based on the engine's RPM. At high speeds, the transmission is mostly in the highest gear, making such breaking-in procedures less meaningful.

15

3

Share

What is the ground clearance of the BJ40?

The ground clearance of the BJ40 is approximately 210mm, which is sufficient for this vehicle to handle most complex road conditions. Below are the detailed specifications of the BJ40: 1. The BJ40 is a rugged off-road vehicle equipped with a part-time four-wheel drive system, a body-on-frame construction, and a solid axle suspension - standard configurations for a true off-roader. The part-time 4WD system enhances the vehicle's off-road performance and escape capability. 2. Vehicles with part-time 4WD generally offer three driving modes: high-range 4WD, low-range 4WD, and high-range 2WD. When switched to low-range 4WD mode, the wheel torque increases significantly, thereby improving off-road capability. Both high-range 4WD and 2WD modes are suitable for normal paved roads. 3. Unlike the unibody construction used in regular passenger cars and urban SUVs, the body-on-frame design features completely separable frame rails and body shell. This construction provides exceptional torsional resistance, enabling vehicles with this design to tackle more extreme off-road conditions. 4. The solid axle suspension features a simple structure that ensures reliability and durability. During off-road driving, this suspension design maximizes tire contact area with the ground, significantly improving traction - a crucial factor in off-road performance.

18

3

Share

Are all car LED headlights higher on the right and lower on the left?

Car LED headlights are all higher on the right and lower on the left. In our country, vehicles are left-hand drive, so the left-side light is positioned lower to avoid causing light pollution, glare, or dazzling effects to oncoming vehicles and pedestrians, which could affect their safe driving. The right-side light is higher because, according to national standards, all road signs and markers are located on the right side of the road. This positioning helps drivers clearly see road signs without obstructing the view of oncoming drivers. Advantages of car LED headlights: Compact size: LEDs are essentially small chips encapsulated in epoxy resin, making them very small and lightweight. Low power consumption: Typically, LEDs operate at a voltage of 2 to 3.6V and a current of 0.02 to 0.03A, resulting in power consumption not exceeding 0.1W. Eco-friendly: LEDs are made from non-toxic materials, unlike fluorescent lamps that contain mercury and can cause pollution. Additionally, LEDs are recyclable. Durable: LEDs are fully encapsulated in epoxy resin, making them more robust than traditional bulbs and fluorescent tubes. There are no loose parts inside the lamp, which makes LEDs less prone to damage. Types of car headlights: There are three types: halogen lamps, xenon lamps, and LED lamps. Halogen lamps are the standard bulbs installed in cars at the factory, typically with a power rating of 55W, representing the first generation of car headlights. Xenon lamps are the second generation, and LED headlights are the third and latest generation of car headlights.

19

4

Share

What is the fuel tank capacity of the Mercedes-Benz C260?

The fuel tank capacity of the Mercedes-Benz C260 is 66 liters, which is the officially announced data. Owners who have purchased the Mercedes-Benz C260 can also check this information on the car's configuration sheet. The fuel grade for the Mercedes-Benz C260 is 95, and its fuel consumption is 8.5L per 100 kilometers. With a full tank, the car can travel approximately 776 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel in the tank. The fuel level is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow for fuel expansion when the temperature rises, preventing overflow from the tank. If the fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.

12

4

Share

Is ETC one card per vehicle?

ETC is one card per vehicle, and one card can be bound to multiple vehicles. According to the "Rules for the Use of Non-Stop Express Passing Systems," when applying for an ETC card, you need to fill out the "ETC Service Deduction Authorization Form." When filling in the designated payment vehicles, multiple vehicles can be listed. This means there is no limit to the number of vehicles that can be bound to a single ETC card for payment purposes. ETC is an electronic toll collection system, also known as an automatic road toll system. It is specifically designed for toll roads, commonly found on highways, toll bridges or tunnels, and certain urban sections to alleviate traffic congestion. ETC Deduction Principle: Highways have one or more ETC lanes. Through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at toll stations, the system uses computer networking technology to settle payments with banks. This allows vehicles to pass through toll stations without stopping, all based on the principle of "pass first, deduct later." Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues. Green and eco-friendly: Promotes low-carbon travel by reducing noise and exhaust emissions, as vehicles pass through toll stations without stopping. Reduced wear and tear: Saves costs by minimizing vehicle acceleration and braking frequency, thereby lowering wear and fuel consumption. Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, key city clusters will achieve interoperability of transportation cards, and the proportion of vehicles equipped with ETC will significantly increase." The plan also set a target of "achieving a 50% ETC usage rate for road passenger vehicles by 2020." Future possibilities: In addition to continuously improving the convenience of ETC installation and usage rates for passenger vehicles, future efforts will include promoting ETC use for trucks and exploring deeper integration of ETC systems with smart transportation developments such as vehicle-to-vehicle communication and vehicle-to-infrastructure coordination. This will provide comprehensive travel services for vehicle owners, meaning more application scenarios will support ETC usage.

2

3

Share

What is the ground clearance of the Lexus LS chassis?

The ground clearance of the Lexus LS chassis is 135mm. In terms of suspension structure, the Lexus LS is very similar to the previous LC model. The dual-node design on the front suspension enhances steering precision and improves wheel stability. Additionally, the LS rear suspension adopts a multi-link structure with aluminum control arms. The moderately tuned suspension strikes an excellent balance between comfort and handling performance. Below are specific details about the Lexus LS: 1. As a yearly facelift model, the 2020 Lexus LS retains the same exterior and interior design, with only configuration adjustments. The main upgrades include the LSS+ active safety system and the addition of ICS to enhance vehicle safety. 2. The 2020 Lexus LS does not feature updates to its powertrain. The models available in the Chinese market offer two powertrain options: a 3.5L V6 and a 3.5L V6 + electric motor. The LS350 is equipped with a 3.5L V6 engine, delivering a maximum power of 232kW (316PS) and a peak torque of 380N·m, with a maximum power output of 315 horsepower and peak torque of 380 N·m, paired with a 10AT transmission. The LS500h features a hybrid system consisting of a 3.5L V6 engine and an electric motor, with a combined maximum power of 264kW (359PS), mated to a simulated 10-speed E-CVT transmission.

8

4

Share

What is the problem when the door is closed but the system indicates it is not?

How to Break in a New Automatic Transmission Car on the Highway?

What is the ground clearance of the BJ40?

Are all car LED headlights higher on the right and lower on the left?

What is the fuel tank capacity of the Mercedes-Benz C260?

Is ETC one card per vehicle?

What is the ground clearance of the Lexus LS chassis?

What does an engine displacement of 1598ml mean?

How to Reset the Maintenance Light on a Zotye Z300?

What does 240t mean in cars?

What brand of car is represented by an arrow logo?