What is the problem when the car temperature is too high?

2 Answers
DelPaige
08/27/25 2:36am
Here are the reasons for the car temperature being too high: Insufficient coolant: Leakage and reduction of coolant can cause the water temperature to rise. At this time, check for any coolant leakage. If there is, repair the leaking parts as soon as possible. If there is no leakage, the corresponding coolant should be added in time. Problem with the cooling fan: The cooling fan can cause the water temperature to rise. When the vehicle is running at high speed, the heat generated cannot be transferred to the antifreeze in time, affecting heat dissipation, which leads to an increase in the antifreeze temperature and boiling. Damaged water pump: If the water pump in the engine cooling system malfunctions and does not rotate smoothly, the flow of coolant will be poor, causing the water temperature light to turn on and the coolant temperature to become too high.
Was this review help?
11
0
Share
LaColton
09/08/25 9:18am
An overheating car is definitely not something to take lightly. I remember encountering this issue last summer during a long-distance drive, and it almost left me stranded. The main causes usually stem from the cooling system—like a clogged radiator where thick layers of scale or willow catkins block airflow through the fins. It could also be a loose or broken fan belt preventing the fan from spinning, or a thermostat stuck in the closed position, cutting off coolant flow to the main circulation. Another possibility is a damaged water pump impeller failing to function. However, the most common culprit is coolant issues—either the level is too low or the fluid has degraded from prolonged use. Don’t underestimate overheating: continuing to drive could lead to engine seizure or even total failure. If this happens, pull over safely immediately, turn on the AC in recirculation mode, shut off the engine, and wait at least half an hour before inspecting. For prevention, regularly check fluid levels, replace coolant every two years, and clean the radiator before long trips—these steps can prevent 90% of such problems.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

Is Front-Engine Rear-Wheel Drive the Same as Four-Wheel Drive?

Front-engine rear-wheel drive is not the same as four-wheel drive; there are clear differences between the two. Front-engine rear-wheel drive refers to a configuration where the engine is located at the front and the driving mechanism is at the rear. Its advantages include strong power and a pronounced sense of acceleration (pushing force). Four-wheel drive vehicles may have the engine positioned at the front or rear, with all four wheels receiving driving force. The benefits of four-wheel drive lie in the vehicle's superior balance and handling. Four-wheel drive systems are mainly categorized into three types: on-demand four-wheel drive, part-time four-wheel drive, and full-time four-wheel drive. On-demand four-wheel drive is mostly built on front-wheel-drive platforms, primarily driven by the front wheels with the rear wheels assisting, where the rear wheels' driving force does not exceed that of the front wheels. Part-time four-wheel-drive vehicles typically operate in two-wheel drive mode and only switch to four-wheel drive under harsh conditions. Full-time four-wheel-drive vehicles excel in off-road performance and have strong road-passing capabilities.
12
5
Share

How often should the drive shaft be greased?

Drive shafts should be greased every half month. Grease is the common name for calcium-based lubricant. Currently, lubricants have developed into a variety of multi-series lubrication products, including not only calcium-based grease but also lithium-based grease, composite lithium-based grease, as well as bearing grease and gear grease classified by usage. The drive shaft is a high-speed, minimally supported rotating body, making its dynamic balance crucial. Generally, drive shafts undergo dynamic balance testing before leaving the factory and are adjusted on a balancing machine. For front-engine, rear-wheel-drive vehicles, the drive shaft transmits the rotation from the transmission to the axle of the final drive.
16
4
Share

What is the Multibeam LED Headlight?

Multibeam LED headlight is the next-generation headlight system featured on the new Mercedes-Benz E-Class. It utilizes newly developed high-resolution precision LED modules as grid light sources, equipped with 84 high-performance LED point light sources. This technology enables more dynamic responses and ensures high-resolution, more precise road illumination. The new Mercedes-Benz E-Class is a mid-to-large sedan under Beijing Benz, with body dimensions of 5078mm in length, 1860mm in width, and 1484mm in height, a wheelbase of 3079mm, a top speed of 230km/h, and a body structure configured as a 4-door, 5-seater sedan.
19
5
Share

What car is the GMC logo?

GMC logo car is called Jimxi in Chinese. It is a luxury business travel vehicle designed for business professionals, equipped with a VORTEC V8 electronic fuel injection engine, delivering a maximum power of 217kw and a maximum torque of 334nm, paired with an electronic four-speed automatic transmission. The GMC has a body length, width, and height of 5760mm, 2100mm, and 2370mm respectively, with a wheelbase of 3429mm. It requires a C1 driver's license, has a fuel tank capacity of 117L, and comes in body colors such as white, black, blue, gray, gold, and platinum. It features a single sunroof.
16
3
Share

How to Activate One-Touch Power Window in Odyssey?

To activate the one-touch power window feature in Odyssey: 1. Start the vehicle and press the one-touch window button on the armrest; 2. After raising the window to fully closed position, continue holding the button for approximately 2 to 5 seconds; 3. Release the button upon hearing a beep sound to enable one-touch window operation. Taking the Odyssey 2021 Comfort Edition as an example, its body dimensions are 4847mm in length, 1820mm in width, and 1702mm in height, with a wheelbase of 2900mm. It is equipped with a 2.0L naturally aspirated engine, paired with an electronic continuously variable transmission, featuring front-wheel drive. The front suspension adopts MacPherson independent suspension, while the rear suspension uses torsion beam non-independent suspension.
4
1
Share

What is the body weight of the BYD Qin PLUS DM-i?

The body weight of the BYD Qin PLUS DM-i is approximately 1820kg. The curb weight of a car, previously commonly referred to as the empty weight, refers to the weight of the car when it is fully equipped according to the manufacturer's technical conditions (such as spare tires, tools, etc.) and all fluids are filled. It is an important design indicator of the car. Taking the Qin PLUS 2021 DM-i 55KM Premium model as an example, its body dimensions are 4765mm in length, 1837mm in width, and 1495mm in height, with a wheelbase of 2718mm. It is equipped with a 1.5L naturally aspirated engine, a front suspension type of MacPherson independent suspension, and a rear suspension type of torsion beam non-independent suspension.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.