What is the principle of yielding to the right-side vehicle?

1 Answers
MorganLee
07/29/25 6:36pm
The principle of yielding to the right-side vehicle applies when there is no traffic command or traffic signal. When your vehicle arrives at an intersection and detects a vehicle approaching from the right, you should yield to the vehicle from the right. Below are additional details: Priority for right-side vehicles: When driving through an intersection without traffic signals, signs, or road markings, and two vehicles are traveling straight perpendicularly, the right-side priority principle applies. The vehicle on the right side of the direction of travel has the right of way, and you must yield to the right-side vehicle. Priority for straight-moving vehicles: At intersections without traffic signals, traffic police direction, or traffic signs and markings, vehicles intending to turn or make a U-turn must yield to straight-moving vehicles. Priority for left-turning vehicles: At intersections on the same road where vehicles are traveling in opposite directions and are released simultaneously, right-turning vehicles must yield to oncoming left-turning vehicles.
Was this review help?
16
5
Share
More Forum Discussions

Why does the Focus shake during acceleration but not when releasing the throttle?

The Focus shakes during acceleration but not when releasing the throttle. It is recommended to check whether the vehicle's tires require dynamic balance calibration, and also to inspect if the throttle body is excessively dirty. These factors may contribute to the issue of the Focus shaking during acceleration but not when releasing the throttle. Below is relevant information: 1. The new-generation Focus 2020 model is equipped with two engines: the 1.5L Eco-Boost and the 1.5L Ti-VCT, with all models meeting the China VI emission standards. 2. The 1.5L Eco-Boost turbocharged dual-injection engine integrates over 20 cutting-edge technologies, including the PFDI dual-injection technology system and a low-inertia mixed-flow turbocharger, delivering a rated power of 174 horsepower and a maximum torque of 243N·m/1750-4500rpm, paired with an 8-speed automatic transmission for both powerful performance and fuel efficiency. 3. The 1.5L Ti-VCT dual-independent variable camshaft timing engine is matched with a 6-speed manual/automatic transmission, achieving a combined fuel consumption as low as 5.4L per 100 kilometers.
12
3
Share

How many days in advance should I make an appointment for Subject 2?

Subject 2 appointments are generally made 7 days in advance. Article 31 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" states that the vehicle management office shall accept applications that meet the conditions for a motor vehicle driving license and arrange the test according to the scheduled date. The test sequence follows Subject 1, Subject 2, and Subject 3 in order. Only after passing the previous subject test can one proceed to the next subject test. Subject 2 is part of the motor vehicle driving license assessment and is the abbreviation for the field driving skills test. For cars (C1, C2), the test items include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving. For large vehicles (A1, A2, A3, B1, B2), the test items include pile test, stopping and starting on a slope, parallel parking, passing a single-plank bridge, curve driving, right-angle turns, passing a restricted-width gate, passing continuous obstacles, driving on bumpy roads, narrow road U-turns, and simulations of highway driving, continuous sharp turns on mountain roads, tunnels, rainy and foggy weather, slippery roads, and emergency handling.
1
3
Share

How to Open the Fuel Tank Cap of Trumpchi GS4?

Method to open the fuel tank cap of Trumpchi GS4 when refueling: Simply pull the switch located at the lower left side of the driver's seat (near the driver's left knee) outward to open it. More information about the car's fuel tank cap is as follows: 1. For most car models, the trunk lid and fuel tank cap are controlled by the central locking system. Therefore, as long as the driver unlocks the central lock inside the car, the trunk lid can be lifted or the fuel tank cap can be pressed open from the outside. The central lock is usually located near the driver's left knee. If you can't find it, you can refer to the car's manual. 2. If the fuel tank cap cannot be opened, you can try accessing it from the trunk. First, remove the trunk lining covering the fuel tank to expose the locking mechanism of the fuel tank cap. You will also see a remote-operated cable for the fuel tank cap. Pulling this cable will open the fuel tank cap. If this doesn't work, try pressing the movable part of the locking mechanism while continuously pulling the cable, which should make it easier to open the fuel tank cap. Some car models have a dedicated switch on the locking mechanism; pressing this switch will open the fuel tank cap.
2
0
Share

How Early Can You Go for the Annual Vehicle Inspection?

Vehicle annual inspections can be conducted up to 3 months in advance. For example, if a vehicle's inspection validity expires in September of this year, the annual inspection period would be from July 1st to September 30th of the same year. There are several ways to check the annual inspection date. The most straightforward methods are to review the vehicle's registration certificate and the electronic copy of the compulsory traffic insurance policy, both of which contain the vehicle's registration date. The registration month indicates the month when the annual inspection is due. Additionally, you can directly check the inspection sticker, which clearly states the validity period of the inspection. Important notes regarding annual inspections: Vehicles that fail the inspection must be repaired within a specified time limit. If they still fail after the deadline, the vehicle management office will confiscate their license plates and prohibit further operation. Vehicles that do not undergo the inspection without a valid reason or fail the inspection are not allowed to operate on the road or be transferred to another jurisdiction. Vehicles that meet the scrapping criteria or have exceeded the prescribed service life will not be inspected, and their license plates will be revoked, their records deleted, and they will be scrapped.
16
1
Share

What is the difference between MT and AT tires?

Here is the relevant introduction to the differences between MT and AT tires: 1. AT tires are all-terrain tires, designed to be more versatile than HT tires. AT tires feature more rugged tread patterns with slightly larger gaps between the tread blocks compared to HT tires. The downside of this design is reduced on-road performance and increased noise, but they offer better durability and traction on unpaved surfaces than HT highway tires. AT tires are designed to balance both off-road and on-road performance. 2. MT tires are mud-terrain tires. The difference between MT and AT tires is that MT tires are a more extreme off-road tire option, heavily favoring muddy conditions and unsuitable for use in northern regions where dry conditions prevail for most of the year. In contrast, AT tires balance off-road and on-road performance. MT tires are the opposite of HT tires, featuring rigid sidewalls and exaggerated tread blocks with significantly larger gaps between them. This design facilitates slow mud expulsion or high-speed mud flinging in muddy conditions, enhancing traction on challenging surfaces like uneven rocky terrain. Additionally, MT tires produce significant noise on paved roads, and vibrations from the tread blocks can be felt at speeds below 10 km/h. Driving on wet paved surfaces with MT tires increases the risk of losing control.
1
5
Share

What are the differences between the Tayron 280 and Tayron 330?

The differences between the Tayron 280 and Tayron 330 lie in their engines: the Tayron 280 model is equipped with a 1.4-liter turbocharged engine, while the Tayron 330 model uses a low-power version of the 2.0-liter turbocharged engine. The 1.4-liter turbocharged engine delivers a maximum power of 110 kW and a maximum torque of 250 Nm, whereas the low-power 2.0-liter turbocharged engine offers a maximum power of 137 kW and a maximum torque of 320 Nm. The Tayron's body dimensions are 4590 mm in length, 1860 mm in width, and 1660 mm in height, with a wheelbase of 2731 mm. In terms of exterior design, the Tayron adopts Volkswagen's new family-style design language, featuring a horizontal grille at the front and LED headlights on both sides, effectively extending the horizontal visual width. The waistline runs from the headlights to the taillights, and the rear design is rounded and bold, with robust lines creating a muscular look. For the interior, the Tayron incorporates a new family-style design, with the dashboard slightly tilted toward the driver's seat for easier operation. The lower part of the dashboard and the gear lever area follow a more traditional design, maintaining a simple and clear layout.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.