What is the principle of the cooling function in the Tiguan L's front passenger storage compartment?

Where is the OBD interface of GAC Honda?

GAC Honda's OBD interface is located on the lower left side of the dashboard in the driver's seat. Introduction to OBD: OBD stands for On-Board Diagnostics, which can detect the working conditions of the engine and other components during vehicle operation. OBD monitors the engine, catalytic converter, particulate filter, oxygen sensor, emission control system, fuel system, EGR, and other systems and components in real-time. It then connects to the ECU through information related to different emission-related components. When an emission fault occurs, the ECU records the fault information and related codes and issues a warning through the fault light to inform the driver. Function of OBD: This system continuously monitors whether the vehicle's exhaust exceeds the standard during engine operation and issues an immediate warning if it does. When a system fault occurs, the Malfunction Indicator Lamp (MIL) or Check Engine warning light will illuminate, and the Powertrain Control Module (PCM) will store the fault information in memory. The fault code can be read from the PCM through a specific procedure. Based on the fault code, maintenance personnel can quickly and accurately determine the nature and location of the fault.

8

3

Share

Where is the tensioner pulley installed?

The tensioner pulley is placed on the slack side of the belt because positioning it on the tight side would require greater tension force, and the pulley's position is prone to vibration. The tensioner pulley presses against the inner side of the slack side and should be positioned as close as possible to the large pulley to avoid excessive reduction in the wrap angle on the small pulley. This configuration is commonly used in V-belt drives. Alternatively, the tensioner pulley can press against the outer side of the slack side. However, the latter arrangement subjects the belt to reverse bending, which may reduce its service life. This setup is typically employed in drives where an increased wrap angle is needed or where space is limited. Below is the working principle of the tensioner pulley: 1. The tensioner pulley is a tensioning device for belt drives. When the center distance of the belt cannot be adjusted, a tensioner pulley can be used to maintain belt tension. It is a follower pulley that presses against the belt to alter the wrap angle of the pulley or control the belt's tension, serving as a tensioning mechanism for belt drives. 2. Belt pulleys transmit power via friction, so they must be tensioned during installation. However, after prolonged operation, the belt may stretch and loosen, leading to slippage, necessitating re-tensioning. If the center distance between the two drive pulleys cannot be adjusted, a tensioner pulley must be used to ensure proper power transmission and prevent slippage. The tensioner pulley generates a belt-tightening force through springs or hydraulic pressure, ensuring the belt applies appropriate pressure against the drive pulley.

13

4

Share

What to Do When the Brakes Fail While Driving?

When the brakes fail while driving, the solutions are: 1. Control the direction based on road conditions and speed, shift from a high gear to a low gear. In a lower gear, the engine will provide significant traction resistance, rapidly reducing the vehicle's speed. 2. Utilize the rigid parts of the car, such as the bumper or body, to rub or collide with natural roadside obstacles like rocks, large trees, highway guardrails, or slopes, forcing the car to stop and minimizing accident damage. When descending a long slope, manual transmission vehicles must remember to shift to a lower gear and use the engine's braking capability to control speed. Avoid prolonged braking and never coast in neutral. For automatic transmission vehicles with manual mode, it is advisable to switch to manual mode and select a lower gear to reduce the time spent on braking.

17

4

Share

What are the usage tips for the Mercedes-Benz GLE?

Usage tips for the Mercedes-Benz GLE include warming up the car after starting, throttle control, and maintaining a safe following distance while driving. Warming up the car after starting: With the continuous advancement of automotive technology, warming up a car is no longer as cumbersome as it used to be. Many high-end vehicles, including the GLE, feature a high-revving quick warm-up process after ignition, lasting about 30 seconds. Once the RPM drops, you can proceed to drive normally. Throttle control during acceleration: Due to the large engine displacement, it's important to control the throttle gently when starting. Avoid stomping on the accelerator, which can cause the car to lurch forward abruptly, especially when carrying passengers. Aim for a smoother acceleration to minimize the sensation of being pushed back into the seat. Maintaining a safe following distance while driving: Keeping an appropriate following distance is crucial and should be adjusted based on your speed. At lower speeds, you can follow more closely, but at higher speeds, it's essential to maintain a sufficient distance to ensure you have enough space to brake safely and avoid accidents.

14

4

Share

What does the Mercedes-Benz A-Class key look like?

The key of the Mercedes-Benz A-Class is very flat and exquisite. Introduction to the functions of the Mercedes-Benz A-Class: The key of the Mercedes-Benz A-Class has three buttons: lock, trunk opening, and unlock. The design of the Mercedes-Benz A-Class key is different from the traditional Mercedes-Benz key design. However, the key designs of the new Mercedes-Benz cars are similar to that of the new Mercedes-Benz A-Class. The spare mechanical key is located inside the remote key. Hidden functions of the Mercedes-Benz key: Using the electronic parking brake in emergency situations. In addition to the parking lock, the electronic parking brake of Mercedes-Benz also has an emergency braking function. In case of an emergency while driving, the vehicle can be braked using the electronic parking brake. One-touch window control. When driving with the windows open and suddenly encountering polluted air outside or entering a tunnel, the usual practice to prevent polluted air from entering the car is to close all windows. If all the windows and sunroof are open, closing them one by one is a time-consuming and laborious process. Mercedes-Benz's one-touch recirculation mode allows for the synchronized closing and reopening of all windows with a single button, restoring the previous open state.

9

4

Share

Where is the cabin air filter located in the Hummer H2?

The cabin air filter in the Hummer H2 is located behind the glove compartment panel. After removing the panel, you can see the cabin air filter connected to the air intake. The Hummer H2 is a large SUV under General Motors, with exterior dimensions of 5170mm in length, 2063mm in width, and 2012mm in height, a wheelbase of 3117mm, and front/rear track of 1763mm. The Hummer H2 is equipped with 6.2L and 6.0L naturally aspirated engines, paired with either a 6-speed automatic transmission or a 4-speed automatic transmission. It features an independent torsion bar, single-tube gas shock absorbers, and a front stabilizer bar for the front suspension, and a five-link variable-rate spring, variable air load, single-tube gas shock absorbers, and a rear stabilizer bar for the rear suspension.

7

2

Share

What is the principle of the cooling function in the Tiguan L's front passenger storage compartment?

Where is the OBD interface of GAC Honda?

Where is the tensioner pulley installed?

What to Do When the Brakes Fail While Driving?

What are the usage tips for the Mercedes-Benz GLE?

What does the Mercedes-Benz A-Class key look like?

Where is the cabin air filter located in the Hummer H2?

What is the reason for the Buick 1.6t idling shake but not shaking when driving?

What Causes the Loud Noise in Volkswagen's Secondary Air Pump?

What causes the shaking when the air conditioning is turned on in a Mercedes-Benz C-Class?

What does an exclamation mark in the water tank of a Volkswagen Lavida mean?