What is the principle of the air supply system?

What is the actual fuel consumption of the Tiggo 8 2.0t?

The MIIT fuel consumption given for the Tiggo 8 2.0t is 8-9 liters per 100 kilometers. Factors affecting fuel consumption: Potholes on the road will consume more fuel. Driving for a long time in low gear will inevitably increase fuel consumption. Not maintaining the engine will consume more fuel. Abnormalities in the engine ignition system also have a significant impact on fuel consumption. For example, inaccurate ignition timing, leakage in high-voltage wires, or weak ignition caused by spark plug carbon deposits will reduce engine combustion efficiency and increase fuel consumption. Methods to reduce fuel consumption: Reduce vehicle load: Remove heavy and infrequently used items from the trunk to reduce weight. Shift gears promptly: Driving in low gear for extended periods not only slows down speed but also increases fuel consumption, especially when driving on slopes. Shorter gear shifting times can save more fuel. Reduce idle time: When driving on city roads, you may encounter long traffic light waits. Turning off the engine during these times can save fuel.

15

0

Share

How to Set the Dashboard Time on Roewe ei5?

To adjust the dashboard settings on the Roewe RX5, press the left and right buttons on the right side of the multifunction steering wheel to switch to the comprehensive information display section. Then, press the OK button on the right side of the multifunction steering wheel to confirm or hold the OK button to reset. After that, press the up and down buttons on the right side of the multifunction steering wheel to make adjustments. The trip computer includes the following information: 1. Digital Speed: Displays the current driving speed of the vehicle. 2. Range: This function automatically calculates and displays the distance the vehicle can travel before the fuel tank is empty. The value will change after refueling. 3. Instantaneous Fuel Consumption: Displays the current fuel consumption of the engine. 4. Since Start: Displays the duration, average speed, average fuel consumption, and distance since the vehicle was started. The values will reset one hour after the vehicle is powered off. Alternatively, you can hold the OK button on the right side of the multifunction steering wheel to reset.

8

1

Share

Where is the turn signal fuse of Nissan Tiida located?

Nissan Tiida's turn signal fuse is located in the fuse box in the front engine compartment. Below is an extended introduction: 1. Introduction to turn signals: Turn signals are important indicator lights that are activated when a motor vehicle turns to alert surrounding vehicles and pedestrians. The turn signal bulb uses a xenon tube with a microcontroller-controlled circuit, operating in an alternating left-right flash pattern continuously. The turn signal employs a flasher to achieve the blinking effect, mainly categorized into three types: resistance wire type, capacitor type, and electronic type. 2. Classification of automotive lights: 1) Headlights, combined headlights are located at the front of the vehicle, primarily serving illumination and signaling purposes. The light emitted by headlights illuminates the road ahead, enabling safe driving at night; 2) Combined taillights, located at the rear of the vehicle, mainly serve illumination and signaling purposes; 3) Turn signals, used to indicate left or right turns to other road users. Regulations require them to be amber; 4) License plate lights, primarily used to illuminate the license plate, allowing identification of the vehicle's license plate at night.

10

4

Share

What are the maintenance policies for Xingrui?

Upon receiving the parking signal, press the stop button to shut down the machine. After completing the work, ensure proper equipment maintenance and civilized production. Geely Xingrui offers a free maintenance policy that includes 4.5 years of basic maintenance (including labor costs). The specific regulations are as follows: 1. Maintenance Mileage: Xingrui requires maintenance every 7,000 to 10,000 kilometers. If you purchase the limited edition (available in stock) at the dealership, you can receive 6.5 years of basic maintenance (including labor costs). 2. Family Vehicle Purchase Subsidy: Eligible for the first subsidy, and the sales policy is clear—even if the family does not own a Geely vehicle, they can still qualify. 3. High Value Repurchase at 78% After 2 Years: This means that if the first owner decides to change cars after two years, the 4S store will repurchase the vehicle at 78% of the original purchase price.

2

5

Share

What Causes White Spots on the Surface of an Aluminum Engine?

The causes and treatment methods for white spots on the surface of an aluminum engine are as follows: 1. Washing contamination: Inadequate washing should be addressed by improving the washing process. If the water used for washing is too dirty, it can contaminate the film; in this case, the water should be replaced to ensure washing quality. 2. Air pollution: The oxide film may be contaminated by smoke, dust, acid, or alkali mist in the air. Enhancing washing, timely dyeing, and prompt transfer can significantly reduce this issue. 3. Oil contamination: The oxide film may be contaminated by oil or sweat. It is essential to strengthen protection and avoid touching the surface of the workpiece with bare hands. 4. Impurities: The presence of insoluble impurities or oil contamination in the dye solution can disrupt normal dyeing. In such cases, the dye solution should be filtered or replaced, and the tank liquid should be cleaned regularly. If the dye solution is contaminated, leading to pitting corrosion on the dyed workpiece, the dye must be replaced. Care should be taken to avoid introducing impurity ions during operation.

2

4

Share

What are the reasons for the Ford Escort's sluggish acceleration?

Ford Escort's sluggish acceleration can be attributed to carbon buildup issues, fuel system problems, and intake system problems. Carbon buildup issues: Including cylinder carbon buildup, throttle carbon buildup, intake pipe carbon buildup, etc. Fuel system: Adding incompatible fuel grades can lead to a decrease in the car's output power and reduced performance. Or, due to a blocked fuel tank vent, clogged fuel tank switch, fuel filter, or fuel line between the fuel tank and the carburetor, the required fuel supply cannot be met, resulting in a lean mixture and sluggish engine acceleration. Intake system: If the air filter is not cleaned in time after long-term use and becomes clogged, insufficient air volume can cause an overly rich combustible mixture. This leads to a decrease in engine power; for vehicles with turbochargers, once the turbocharging device fails, even if the throttle is applied, the engine will still feel sluggish and unable to perform.

14

0

Share

What is the principle of the air supply system?

What is the actual fuel consumption of the Tiggo 8 2.0t?

How to Set the Dashboard Time on Roewe ei5?

Where is the turn signal fuse of Nissan Tiida located?

What are the maintenance policies for Xingrui?

What Causes White Spots on the Surface of an Aluminum Engine?

What are the reasons for the Ford Escort's sluggish acceleration?

What to Do When the Car Key Doesn't Start the Engine?

Why is the battery of the Buick LaCrosse not durable?

What does 'wide left and narrow right' mean when learning to drive?

Can a Damaged Tire Bead Still Be Used?