What is the Principle of a Voltage Regulator?

What are the dimensions (length, width, height) of the Land Rover Evoque?

The length, width, and height dimensions of the Land Rover Evoque are 4531mm/1904mm/1650mm, which are official data. The length of the Land Rover Evoque refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width of the Land Rover Evoque refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height of the Land Rover Evoque refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The turbocharged engine of the Land Rover Evoque has a maximum power of 147kW and a maximum torque of 320 Nm. The maximum power speed of this engine is 5500 rpm, and the maximum torque speed ranges from 1200 to 4000 rpm. It is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with an automatic transmission (AT). There are relevant national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, under national standards, the significance of vehicle width data is to ensure enough space during overtaking, preventing accidents or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.

4

0

Share

What are the traffic rules and knowledge for motorcycles?

Motorcycle traffic rules and knowledge are as follows: Article 67 stipulates: Pedestrians, non-motor vehicles, tractors, wheeled special machinery vehicles, articulated buses, full trailer trucks, and other motor vehicles with a design maximum speed of less than 70 kilometers per hour are not allowed to enter expressways. The maximum speed limit indicated by expressway speed limit signs shall not exceed 120 kilometers per hour. Article 78: Expressways shall indicate the driving speed of lanes, with the maximum speed not exceeding 120 kilometers per hour and the minimum speed not less than 60 kilometers per hour. On expressways, the maximum speed of small passenger cars shall not exceed 120 kilometers per hour, other motor vehicles shall not exceed 100 kilometers per hour, and motorcycles shall not exceed 80 kilometers per hour.

17

3

Share

Where is the paper filter element of Nissan CVT transmission located?

Nissan CVT transmission paper filter element is located under the hood, inside the engine compartment, at the upper right corner of the battery, in front of the engine. Here is the relevant introduction: CVT oil filter: The vehicle manual does not specify a replacement cycle for the CVT oil filter. Whether to replace the CVT filter element can be decided based on the condition of the oil when changing the CVT oil. Generally, the filter element is rarely replaced separately unless it is found to be very dirty. Consider whether to replace the filter element after the second oil change. Notes: CVT oil generally does not need to be replaced. It only needs to be replaced after reaching 80,000-100,000 kilometers, as indicated in the maintenance manual at 100,000 kilometers, because the quality of the CVT oil will decline by this mileage. Since CVT transmissions have high requirements for oil quality, it is not recommended to replace it outside; it is best to return to the dealership for replacement.

4

1

Share

What is the normal tire pressure range for the Toyota RAV4?

Toyota RAV4's normal tire pressure range is 2.2-2.5 bar. The car's tire pressure can generally be referred to the label on the back of the fuel tank cap or the car's manual. The hazards of excessive tire pressure are as follows: The tire's friction and adhesion will decrease, affecting braking performance; it may cause steering wheel vibration and deviation, reducing driving comfort; it accelerates the wear of the central tread pattern of the tire, shortening the tire's lifespan; the vehicle's vibration increases, indirectly affecting the lifespan of other components; it causes excessive stretching deformation of the tire cords, reducing the tire's elasticity and increasing the load on the car while driving; puncture resistance decreases. When encountering sharp objects such as nails or glass on the road, they can easily penetrate the tire, and impacts may cause internal cracks and blowouts, leading to tire bursts. The hazards of insufficient tire pressure are as follows: The friction coefficient with the road surface increases, leading to higher fuel consumption; it makes the steering wheel heavy and prone to deviation, which are factors detrimental to driving safety; it increases the movement of various parts of the tire, causing abnormal heating due to excessive rolling; it reduces the function of the cords and rubber, leading to delamination or cord breakage, and excessive friction with the rim causes damage to the bead area and abnormal wear; the friction between the tire and the ground multiplies, causing the tire temperature to rise sharply, the tire to soften, and its strength to drop drastically. High-speed driving may lead to tire bursts; it increases the deformation of the tire body, making the sidewalls prone to cracks, while generating flexing motion, leading to excessive heat, promoting rubber aging, fatigue of the cord layers, and cord breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear.

16

0

Share

After merging C1D licenses, which time is used for scoring clearance?

If the C1D merged license is still within the probationary period, the scoring clearance will be based on the probationary period timeline. After the probationary period, it will be based on the date of initially obtaining the permitted vehicle type. Below is additional information regarding the probationary period: Definition of probationary period: According to national regulations, the probationary period for new drivers starts from the date of initially obtaining the driver's license and lasts for 12 months. During this period, new drivers must display a probationary sign on the rear of their vehicle. Penalties for violations: If a driver accumulates 12 penalty points during the probationary period, the permitted vehicle type qualification obtained during probation will be revoked. If the revoked qualification is not for the highest permitted vehicle type, the highest permitted vehicle type qualification should also be revoked as stipulated in the first paragraph of Article 68.

12

4

Share

What is the 0-100 km/h acceleration time for the Corolla Hybrid?

According to official data, the Corolla Hybrid E+ has a displacement of 1.8L and achieves a 0-100 km/h acceleration time of 11.7 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in faster acceleration. For comparison, the Levin Hybrid E+ in the same class has a maximum torque of 142 Nm and a 0-100 km/h acceleration time of 11.18 seconds. The Corolla Hybrid E+ also has a torque of 142 Nm but achieves a 0-100 km/h acceleration time of 11.7 seconds. Transmission efficiency: The transmission acts as a medium for power delivery, inevitably involving power loss. Higher transmission efficiency leads to better acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Corolla Hybrid E+ is equipped with an electronic continuously variable transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is referred to as the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. For comparison, the Levin Hybrid E+ in the same class has a power-to-weight ratio of 66 Hp/T and a 0-100 km/h acceleration time of 11.18 seconds. The Corolla Hybrid E+ has a power-to-weight ratio of 65 Hp/T and achieves a 0-100 km/h acceleration time of 11.7 seconds.

6

3

Share

What is the Principle of a Voltage Regulator?

What are the dimensions (length, width, height) of the Land Rover Evoque?

What are the traffic rules and knowledge for motorcycles?

Where is the paper filter element of Nissan CVT transmission located?

What is the normal tire pressure range for the Toyota RAV4?

After merging C1D licenses, which time is used for scoring clearance?

What is the 0-100 km/h acceleration time for the Corolla Hybrid?

What does brakehold mean and what button is it on the car?

Is Replacing the Ignition Lock Cylinder Harmful to the Car?

What type of oil does Mazda use from the factory?

What is the principle behind the whistling sound of a motorcycle engine?