What is the principle behind the GTR's flame spitting?

Do cars still have water tanks now?

Currently, cars do have water tanks, which refer to radiators. More information about radiators is as follows: 1. The radiator is part of the car's cooling system. In the engine's water cooling system, the radiator consists of three parts: the inlet chamber, the outlet chamber, the main plate, and the radiator core. 2. Radiators can be installed in three ways: same-side inlet and outlet, opposite-side inlet and outlet, and bottom inlet and outlet. Regardless of the method, the number of pipes should be minimized, as more pipes not only increase costs but also potential risks. 3. The hoses of the engine radiator can age over prolonged use and are prone to cracking, allowing water to easily enter the radiator. If a hose ruptures while driving, the high-temperature water sprayed out can form large clouds of steam escaping from under the engine hood. When this happens, immediately choose a safe place to stop the car and then take emergency measures to address the issue.

12

5

Share

How to Maintain a Manual Transmission?

Manual transmission maintenance methods are as follows: 1. If mineral-based gear oil is used in the transmission, the transmission fluid should be replaced every 3 years or 60,000 kilometers; if synthetic oil is used, regularly inspect the transmission fluid - it can continue to be used as long as the oil quality remains good. 2. During normal operation, transmission fluid operates at around 120°C, placing high demands on the fluid quality which must also be kept clean. However, special circumstances may arise during use, necessitating timely inspection and repair. 3. Transmission cleaning should be performed at professional repair shops using specialized transmission cleaning equipment to ensure optimal fluid replacement while the transmission is operating.

5

3

Share

What to Do When the Mercedes-Benz Hold Function Doesn't Engage?

Mercedes-Benz hold function not engaging is generally due to improper foot technique or lack of familiarity. Once you master the correct operation, practice more to get used to it. The correct operation method is: after stopping the car, quickly press the brake pedal once more. If the hold function doesn't engage, release the brake slightly and press it again. In simple terms, after the vehicle comes to a complete stop, quickly press the brake pedal once more. The brake doesn't need to be pressed deeply, but it must be done quickly. More information about Mercedes-Benz is as follows: 1. Mercedes-Benz is a German luxury car brand and one of the world's most successful premium car brands. 2. Its perfect technical level, rigorous quality standards, innovative capabilities, and a series of classic coupe models are highly praised.

6

3

Share

How to Turn Off the Rear Window Wiper?

Steps to turn off the rear window wiper: 1. With the ignition on but the engine off; 2. Turn the wiper on once; 3. Immediately turn it off; 4. The wiper will return to its original position. The wiper is a tool on the front windshield of motor vehicles designed to simply clear rainwater and other debris to maintain visibility. Wipers are crucial for driving safety, especially during rainy seasons. It is important to regularly inspect and maintain the wipers to prevent obscured vision due to aging wiper blades, which could lead to traffic accidents. Adjusting the wiper switch forward or backward switches between the front and rear wipers, while adjusting it up or down changes the wiper speed. Pulling the wiper stalk one notch toward the driver adjusts the front windshield wiper, and pulling it another notch activates the front windshield washer function. Pushing the stalk one notch toward the front of the vehicle adjusts the rear window wiper.

11

0

Share

What is the principle of tire pressure monitoring?

The principle of tire pressure monitoring involves installing a built-in sensor on the tire. The sensor includes a bridge-type electronic pressure sensing device that detects air pressure, converting the pressure signal into an electrical signal. This signal is then transmitted wirelessly. The display unit shows various data changes or alerts the driver through beeps or other forms when abnormal tire conditions are detected. The working principle of indirect tire pressure monitoring is: when the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to other wheels. By comparing the rotational speed differences between tires, the system monitors tire pressure.

11

3

Share

What are the dimensions of the Roewe RX5?

The length, width, and height dimensions of the SAIC Roewe RX5 are 4556mm/1855mm/1719mm, which are official data. The length of the SAIC Roewe RX5 refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The turbocharged engine of the SAIC Roewe RX5 has a maximum power of 133kW and a maximum torque of 285Nm. The maximum power speed of this engine is 5600 rpm, and the maximum torque speed ranges from 1400 to 4000 rpm. It is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a wet dual-clutch transmission (DCT). There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data is to ensure adequate space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.

11

3

Share

What is the principle behind the GTR's flame spitting?

Do cars still have water tanks now?

How to Maintain a Manual Transmission?

What to Do When the Mercedes-Benz Hold Function Doesn't Engage?

How to Turn Off the Rear Window Wiper?

What is the principle of tire pressure monitoring?

What are the dimensions of the Roewe RX5?

How to Deal with Car Door Squeaking Noise?

How to Change the Transmission Oil for a Cruze?

How long after window tinting can I roll down the windows?

What are the hidden functions of the Elantra remote key?