What is the pressure of car air conditioning pipes?

2 Answers
LaEden
07/24/25 12:47am
Car air conditioning low-pressure pipe pressure is between 1.0 to 2.5 bar; high-pressure pipe pressure is between 15 to 18 bar. More information about car air conditioning is as follows: 1. The normal low pressure of car air conditioning should be between 0.15 to 0.25 MPa; normal high pressure should be between 1.3 to 1.7 MPa. 2. The car air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the vehicle compartment. 3. It can provide a comfortable riding environment for passengers, reduce driver fatigue, and improve driving safety. 4. The air conditioning system has become one of the indicators to measure whether a car is fully equipped with functions.
Was this review help?
9
3
Share
DeJune
08/10/25 8:31pm
I've driven various car models, and the pressure changes in the AC lines can vary significantly. Under normal conditions, the high-pressure side is around 200 psi, while the low-pressure side is about 30 psi. However, on hot days, it can surge to nearly 300 psi, and drop back down in cold weather. When the system operates normally, the pressure balances out—the high pressure rises quickly when the compressor kicks in and gradually drops when it shuts off. There are many influencing factors, primarily ambient temperature—high temperatures in summer cause a sharp spike in pressure, increasing compressor load and the risk of issues, while winter brings more stable pressures. Vehicle type also plays a role, with SUVs having 10-20% higher pressure than sedans due to engine output affecting the load. Refrigerant type matters too—older R134a systems operate at 25-50 psi low pressure and 150-280 psi high pressure, while newer R1234yf systems run slightly higher pressures for better environmental friendliness. Remember, never attempt to check the pressure yourself with gauges—the high-pressure lines can cause severe burns. I've seen leak accidents at repair shops—it's too dangerous. Professional advice: schedule regular AC maintenance to prevent refrigerant leaks or compressor failures.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

Is the 'off' light on the car indicating it's turned off or on?

When the 'off' light is illuminated on the car, it means the system is turned off. The 'off' light in a car mainly refers to the ESP off light, where ESP stands for Electronic Stability Program, which is an active safety device designed to prevent the vehicle from skidding or losing control. If the ESP off light is on, it indicates that the vehicle's stability control system is either turned off or malfunctioning. If you accidentally press the ESP off button, you can turn the ESP back on by pressing it again briefly. However, if the light is on due to a system malfunction, it is important to take the vehicle to a 4S dealership for inspection and repair. There are several reasons why the warning light might come on, including wiring faults, damaged sensors, errors in the electronic control unit signals, or a weak battery.
13
4
Share

Is it acceptable to leave the turn signal on after completing a roadside parking?

It is not acceptable to leave the turn signal on after completing a roadside parking. Upon hearing the instruction to pull over, the first reaction should be to activate the right turn signal, followed by two observations: identifying a suitable parking spot ahead to the right and checking the rearview mirror to assess parking conditions. It is advisable to reduce speed and downshift to facilitate subsequent operations. Additional relevant information is as follows: Note 1: After locating an appropriate spot, begin turning right. It is important to continuously adjust while observing from the rearview mirror. When the reference point aligns with the edge line, stop immediately. Parking must be swift to prevent the vehicle from tilting. Engage the handbrake, shift to neutral, release the clutch and brake, manually turn off any remaining turn signals, shut off the engine, activate the hazard warning lights, and await further instructions. Note 2: In most vehicles, if the steering wheel is turned more than half a turn after activating the turn signal, the signal will automatically turn off once the steering wheel is straightened.
10
0
Share

Is Fuel System Cleaning Useful?

Fuel system cleaning is useful. The fuel system can clean carbon deposits, gum, and sludge from the fuel injectors, intake valves, cylinder walls, piston tops, and intake passages. After cleaning, it can significantly reduce harmful emissions from the vehicle's exhaust, restore engine power, help the vehicle pass emission tests, and improve engine efficiency and fuel economy. The fuel system consists of components such as the fuel pump, fuel filter, and fuel injectors, and its function is to ensure the required fuel flow for the engine under various working conditions. The fuel system handles fuel filling and transportation, ensuring that fuel reaches the engine smoothly to power it, while also collecting fuel vapors and filtering them before releasing them into the atmosphere.
11
0
Share

What is the transmission model of Jetta VS5?

Jetta VS5's transmission model is AQ250. The transmission, also known as a gearbox, is an automotive component used to alter the speed and torque from the engine and can fix or change the transmission ratio between the output and input shafts in steps. More related information is as follows: 1. Composition: The transmission consists of a gear transmission mechanism and a control mechanism. Some vehicles also have a power take-off mechanism. It can be classified into stepped, continuously variable, and integrated transmissions. 2. Overview: The Jetta VS5 is a compact SUV with dimensions of 4419mm in length, 1841mm in width, and 1616mm in height, a wheelbase of 2630mm, a fuel tank capacity of 51 liters, and a curb weight of 1310kg.
20
2
Share

How to Replace the Spark Plugs on an Elysee?

Elysee spark plug replacement method: 1. Use a T20 screwdriver to remove the cover plate screws above the spark plugs; 2. Remove the oil vapor absorption tube and ignition coils, after removing the ignition coils you can see the spark plugs; 3. Use a special spark plug wrench to remove the spark plugs, then reinstall the new spark plugs in the reverse order, following the principle of replacing one at a time. Spark plugs, commonly known as sparking plugs, function by discharging the pulsed high voltage electricity delivered by the high-tension leads, breaking down the air between the two electrodes of the spark plug to generate an electric spark that ignites the air-fuel mixture in the cylinder. The main types of spark plugs include: standard spark plugs, extended insulator spark plugs, electrode-type spark plugs, seat-type spark plugs, pole-type spark plugs, surface-gap spark plugs, etc.
20
4
Share

What are all the lighting items in Subject 3?

Here are the lighting items for Subject 3: 1. Pull over to the side: Turn off the low beam and turn on the position light. 2. Driving on poorly lit roads: Turn on the high beam. Use high beam when the speed is greater than 30km/h and low beam when the speed is less than 30km/h. 3. Passing oncoming vehicles and intersections: On well-lit roads or when there is a vehicle ahead, turn on the low beam. 4. Passing sharp curves, crosswalks, overtaking, arched bridges, and ramps: Alternate between high and low beams. 5. In case of a breakdown on the road: Turn on the position light and hazard warning lights. 6. Driving in foggy conditions: Turn on the fog lights and hazard warning lights.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.