···
Log in / Register

What is the power output of the Harley 1200?

4 Answers
AutumnMarie
07/29/25 7:55pm

Harley 1200's power data has not been officially released. Dimensions of the Harley 1200: The full name of the Harley 1200 is "Harley Iron 1200," which belongs to the cruiser series. It has a length of 2200mm, a seat height of 735mm, a wheelbase of 1515mm, and a ground clearance of 110mm. Configuration details: It is equipped with a 1200cc air-cooled Evolution-V-Twin engine, featuring an Electronic Sequential Port Fuel Injection (ESPFI) system, with a displacement of 1202cc. The engine torque is at 4000 RPM.

Was this review help?
4
3
Share
DiAndres
08/14/25 3:42pm

The Harley 1200 typically delivers around 67 horsepower, which is a classic engine output. I always feel the exhilarating power when riding this bike, especially with that deep roar during acceleration—it's absolutely thrilling. This figure is more than sufficient for daily riding, particularly for the Sportster series, which is designed for urban cruising and short trips. I remember upgrading the exhaust system a few years ago, making the sound even more aggressive, though the power remained largely unchanged. For maintenance, regular checks on the oil and cooling system can prevent power loss. Overall, while 67 horsepower may not seem high compared to modern superbikes, Harley's charm lies in its high torque and stable riding feel, making it perfect for enthusiasts who appreciate the classic Harley style.

Was this review help?
12
3
Share
Expand All
OBryce
10/15/25 8:10am

As someone familiar with motorcycles, I pay attention to the power details of the Harley 1200, which is approximately 67 horsepower, reaching its peak at around 5500 rpm. In terms of torque, it generally reaches 90Nm, providing the bike with good linear acceleration. I recommend checking the official specifications or service manual for confirmation, as different years and modifications can affect the actual output. Regular maintenance checks on the belt or chain drive can prevent power loss, as some older bikes may experience a slight drop of a few horsepower. Overall, 67 horsepower offers a good balance between fuel efficiency and performance for a mid-displacement bike, making it suitable for street riding.

Was this review help?
19
1
Share
Expand All
VanCharles
11/29/25 2:13am

The Harley 1200 I rode has 67 horsepower, which isn't too strong for beginners and is easy to handle. Power refers to the engine's output force, affecting acceleration and speed. I think the key is understanding that horsepower affects handling – for example, less aggressive acceleration in city traffic is safer. Maintaining battery health ensures stable power output, and don't neglect regular inspections. Overall, this power level is suitable for daily commuting.

Was this review help?
16
3
Share
Expand All
More Forum Discussions

How to solve the problem of BMW X1 air conditioner not cooling?

First, drive with the windows open for a while to equalize the indoor and outdoor temperatures, then close the windows, turn on the air conditioner's internal circulation mode, and set it to the coldest mode with the highest fan speed. If the car air conditioner can still cool, go to a 4S shop to check if there is a lack of refrigerant (Freon). If it is lacking, Freon can be added. It is best to replace the air filter during seasonal changes and perform a cleaning of the air conditioning ducts. For air conditioning circuit issues, check whether the AC switch on the control panel is malfunctioning, whether the main unit's temperature control circuit is normal, and whether the compressor's electromagnetic coil is engaging properly.
16
5
Share

How to Match the Remote Key for Besturn B70?

Park the car and ensure all four doors are closed. Then, open and close the left front door (the main driver's side door) three times. Within three seconds, insert the key and turn it on and off five times consecutively (without starting the engine). Remove the key and press the unlock and lock buttons on the remote. You should hear a response from the remote. After the remote responds, press the unlock and lock buttons on the new remote. The car may experience remote control confusion at this point, requiring a re-matching process. Ensure all four doors are locked, insert the key, and turn it on and off five times within five seconds. Remove the key and press the unlock and lock buttons on the remote twice to complete the process.
18
2
Share

How to Reset the Maintenance Wrench Light on Buick Encore?

Turn off the ignition switch to cut off the power supply to the car. Press and hold the buttons on the dashboard simultaneously, keeping both trip reset buttons pressed for more than 5 seconds. Turn the key to the second position (accessory mode) without starting the engine, and wait until all dashboard lights illuminate. This process typically takes about 10 seconds. Wait for the wrench light to go off. Once it's off, release both trip reset buttons. Turn off the ignition switch and then turn it back on to complete the maintenance reset.
17
1
Share

How to Fix Abnormal Power Window Operation in Honda Vezel?

Open the door where the switch needs to be replaced. For most models, the power window switch area is made of plastic. Carefully examine the seam between the trim panel and door panel to locate the notch. Insert a pry tool or flat tool into the notch to lift the trim panel, then slowly remove the panel along the gap. Disconnect the power window switch connector. Flip the trim panel over, and you should see the switch secured by several cross-head screws. Remove these screws to detach the power window switch. Install the new power window switch, tighten the screws, and reconnect the connector. Test the window operation first to confirm the switch functions properly before reinstalling the trim panel.
8
2
Share

How to remove the fuel pump of Honda CRV?

Remove the rear seat of the Honda Fit vehicle, and use a flat-head screwdriver to pry open the cover plate of the Honda CRV fuel pump. Take off the cover plate of the Honda CRV fuel pump and unplug the connector of the Honda CRV fuel pump. Disconnect the fuel inlet pipe of the Honda Fit, then remove the entire fuel pump of the Honda CRV. Be extremely careful to avoid any open flames or sparks during the process. During installation, note that there are two very small oil drain holes on both sides of the fuel pump base, and no oil should drip from them. Since the fuel pump is immersed in gasoline for a long time, the sealing ring is prone to aging. When installing the fuel pump, check whether the sealing rings on the inlet and outlet pipes are aged or worn.
2
1
Share

How to Replace the Wiper Switch Assembly on a Buick Excelle?

During disassembly, first push the wiper towards the base of the wiper arm. Once it is completely detached from the wiper arm interface, pull it out in the opposite direction. Before pulling it out, rotate the movable wiper blade slightly; otherwise, it may encounter resistance during removal. Installation follows the reverse order of disassembly. First, insert the wiper interface into the wiper arm. During this step, the wiper arm clip must pass through the wiper frame. Then, pull the U-shaped connector upwards into the U-shaped clip. If you hear a crisp "click" sound, it indicates that the installation is properly seated. After installing the new motor, it is advisable to first plug in the power connector to test whether it operates normally.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.