What is the power output of the BMW 525?

1 Answers
McAlaina
07/29/25 4:02pm
The maximum power output of the BMW 525 model is 135kW. The engine is a 2.0T 184 horsepower L4, paired with an 8-speed automatic transmission. The body structure is a 4-door, 5-seat sedan, with a top speed of 230km/h. The body dimensions are 5106*1868*1500mm (length*width*height). For the BMW 525 engine, the following maintenance methods can be used daily: Use lubricating oil of the appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, select CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. As oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass the filter and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These mix with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures the engine operates properly but also extends the overall lifespan of the radiator and engine.
Was this review help?
5
4
Share
More Forum Discussions

What engine does the McLaren F1 use?

The engine of the McLaren F1 was developed by BMW, with the code name S70/2. The McLaren F1 is equipped with a 6.1L 60-degree V12 naturally aspirated engine, which delivers a maximum power output of 461 kW and a maximum torque of 651 Nm. More details about the McLaren F1 are as follows: 1. The McLaren F1 is a classic sports car produced by McLaren. This car was developed and produced by McLaren engineers incorporating a significant amount of F1 racing technology, hence the name F1. 2. The McLaren F1 utilizes a lot of racing technology in its production, but the only drawback of this car is that it does not use carbon fiber brake discs, possibly due to the brake tuning issues of this car, which led to the absence of top-tier brake discs. 3. The chassis of this car is very low, almost as if it is close to the ground. The design philosophy of the McLaren F1 is compact and sleek. The dimensions of this car are 4288*1820*1140 mm, with a wheelbase of 2724 mm.
7
4
Share

What is the minimum ground clearance of the Ford Kuga?

The minimum ground clearance of the Ford Kuga is 210mm. Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to characterize the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. Below is some relevant information: 1. Generally speaking, the greater the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven terrain, but the higher the center of gravity, which reduces stability. The smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven terrain, but the lower the center of gravity, which can increase stability. 2. The minimum ground clearance must consider the passability when loading and unloading on transport platforms, as well as the possibility of the car not scraping when approaching the edge of a typical sidewalk. If the vehicle is restricted for sale to a specific country or region, the local road quality must also be considered. Additionally, the value of the minimum ground clearance has certain limitations, as it is related to the vehicle's function and aerodynamics. 3. Some models have a range of values for the minimum ground clearance, indicating that they may be equipped with adjustable suspension, allowing the ground clearance to change according to driving conditions.
10
4
Share

What are the body dimensions of the Volkswagen Touran?

The length, width, and height of the Touran are 4527mm, 1829mm, and 1659mm respectively, with a wheelbase of 2791mm. Below is the relevant information: 1. The Touran is an MPV model under the Volkswagen brand. 2. The new Touran series is equipped with a 1.4-liter turbocharged engine. This engine has a maximum power output of 110kW and a maximum torque of 250 Nm. It can deliver maximum power at 5000 rpm and maximum torque between 1750 to 3000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 3. The new Touran uses a MacPherson independent suspension at the front and a four-link independent suspension at the rear.
12
3
Share

What is the Chinese name of Peugeot DS?

DS is a car under the French Peugeot Citroën Group (PSA), with the Chinese name Di Ai Shi. The DS series includes: DS5LS, DS4S, DS5, DS9 New Energy, DS9, DS6, DS7, DS (Imported), DS4, DS5 (Imported), and DS3. Below is relevant information: 1. DS is a premium automotive brand under the French Peugeot Citroën Group, with the full French name Déesse, meaning 'goddess' in French. The brand originated in 1955, and its official Chinese name is Di Ai Shi. 2. From 1955 to 1975, it became a classic with nearly 1.5 million units sold. However, this model was eventually discontinued due to technical issues and declining sales. It wasn't until 2009, when Citroën wanted to create a new premium sub-brand, that the name 'DS' was revived. 3. Among them, the DS5 is a high-end large hatchback model that emphasizes design aesthetics. The DS5 gasoline engine is primarily a 1.6T turbocharged engine, available in two power outputs, with maximum power of 160 horsepower and 200 horsepower respectively. Its exterior design resembles that of a concept car, featuring a stylish and eye-catching appearance.
9
1
Share

Which country's brand is Lynk & Co?

Lynk & Co is a Chinese automotive brand, and it is a subsidiary of Geely. Lynk & Co produces both sedans and SUVs. The models under Lynk & Co include the 01, 02, 03, 05, 06, and others. Below is some relevant information: 1. The Lynk & Co 03 is a compact sedan with a wheelbase of 2730 mm, and its length, width, and height are 4639 mm, 1840 mm, and 1472 mm, respectively. 2. The Lynk & Co 03 is equipped with three types of engines: a low-power 1.5-liter turbocharged engine, a high-power 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine. 3. The Lynk & Co 03 features a MacPherson independent front suspension and a multi-link independent rear suspension.
1
5
Share

Where is the cabin air filter located on the Dongfeng Peugeot 308?

The cabin air filter of the Dongfeng Peugeot 308 is installed behind the glove compartment on the passenger side. Below are the steps to replace the cabin air filter: 1. First, open the glove compartment cover and squeeze both sides towards the center with both hands to remove the glove compartment. 2. Then, press firmly on the fixing clips on both sides of the cover plate to remove it. 3. Next, pull out the old cabin air filter towards the outside, insert the new cabin air filter, and then reassemble following the reverse steps.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.