···
Log in / Register

What is the power output of the Avalon Hybrid's electric motor?

4 Answers
MacTimothy
07/28/25 5:24pm

The maximum power output of the Avalon Hybrid's electric motor is 88 kilowatts. Below is some related expanded information: Avalon Hybrid's configuration: The hybrid version of the Avalon is equipped with a 2.5-liter naturally aspirated engine and a 120-horsepower electric motor. The 2.5-liter naturally aspirated engine in the hybrid version has a maximum power output of 131 kilowatts and a maximum torque of 221 Newton-meters; the electric motor in the hybrid version has a maximum power output of 88 kilowatts and a maximum torque of 202 Newton-meters. Avalon's basic parameters: The Avalon is Toyota Motor Corporation's flagship model in the US market. The vehicle's length, width, and height are 4978 millimeters, 1849 millimeters, and 1435 millimeters respectively, with a wheelbase of 2870 millimeters.

Was this review help?
19
2
Share
Elmer
08/11/25 9:32pm

The hybrid version of the Asian Dragon has an electric motor with an output of approximately 88 kilowatts, equivalent to around 120 horsepower. It primarily delivers strong responsiveness at low speeds, such as during acceleration or initial startup. As a long-time owner, I find the coordination between the electric motor and the 2.5-liter engine exceptionally smooth, reducing jerky movements, especially in stop-and-go traffic where power delivery remains linear. The total system output reaches about 218 horsepower, with the electric motor contributing significantly. However, it mainly relies on battery power, allowing for short-distance pure electric driving when fully charged. Additionally, the hybrid setup significantly improves fuel efficiency, with urban fuel consumption as low as 5 liters per 100 kilometers, saving considerable commuting expenses. Regular maintenance checks on the motor's insulation and wiring can extend its lifespan.

Was this review help?
13
4
Share
Expand All
DiSimon
09/30/25 2:04am

The maximum power of the hybrid version of the Avalon's electric motor is 88kW or 120 horsepower, which makes driving in the city incredibly enjoyable, with much quicker response compared to pure gasoline cars. From my daily driving experience, it makes starting smoother and quieter, and the electric motor alone can handle uphill climbs effortlessly without any sluggishness. Within the hybrid system, it interacts with the engine—for example, during cruising, the engine charges the battery while the electric motor remains idle, making the overall system very fuel-efficient. However, it's worth noting that a higher electric motor power can also lead to faster battery drain, so battery management is crucial. Avoiding sudden acceleration in daily driving helps maintain performance. During maintenance, don’t overlook cooling system checks, as overheating can shorten its lifespan.

Was this review help?
11
2
Share
Expand All
Carol
11/13/25 3:53am

The hybrid version of the Avalon has an electric motor with an output of approximately 88 kilowatts, delivering 120 horsepower. Its core function lies in assisting acceleration within the hybrid system, particularly providing maximum torque at low speeds. Working in tandem with the engine, it enhances fuel efficiency, making the overall system highly effective. Simply put, the electric motor ensures a smoother and more eco-friendly driving experience.

Was this review help?
5
0
Share
Expand All
More Forum Discussions

What is the fuel tank capacity of a Xiali in liters?

The fuel tank capacity of a Xiali is 37 liters, as officially announced. Owners who have purchased a Xiali can also check this information on the vehicle's configuration sheet. The recommended fuel grade for Xiali is 92 octane, with a fuel consumption of 6.1L per 100 kilometers. A full tank can cover a distance of approximately 607 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill level, leaving some space between the safe fill level and the tank opening. This space is designed to accommodate fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
15
1
Share

What Causes the Loud Noise from the Car Fan?

The loud noise from the car fan is mainly caused by three reasons. Below is a detailed explanation of these three causes: 1. Exhaust fan blades: The exhaust fan, driven by an electric motor, rotates the blades to drive airflow, facilitating air exchange between indoor and outdoor environments as part of an air conditioning appliance. When the blades of the exhaust fan inside the air conditioner become deformed, it can result in a louder noise, and it is recommended to replace the exhaust fan. 2. Exhaust fan motor: The purpose of exhaust is to remove stale indoor air and regulate temperature, humidity, and comfort. If the motor of the exhaust fan inside the air conditioner is damaged, it can lead to a louder noise, and it is recommended to replace the exhaust fan. 3. Excessive debris: If there is a significant amount of debris inside the air conditioner, it is advisable to clean the air conditioner.
15
4
Share

Where to Place the ETC Tag?

The ETC installation position is generally in the upper middle part of the front windshield horizontally, while for large vehicles such as trucks and buses, the installation position is in the lower middle part. The suitable installation position should be at a height of no less than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof films, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave skylight strip. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply, the vehicle owner must provide original and photocopies of their valid ID card and vehicle registration certificate. If the application is made by a proxy, the proxy's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. A bank card for deducting highway tolls is required, and the vehicle must be registered under the name of an individual aged between 18 and 60. Documents required for company vehicles: An introduction letter from the vehicle owner (with official seal); photocopy of the organization code certificate or business license (with official seal); original ID card of the proxy; original vehicle registration certificate; the vehicle for which ETC is to be applied. Below are the precautions for ETC installation: Do not obstruct the driver's view; it is best to install it behind the rearview mirror: Many car models have a large tilt angle of the windshield, resulting in a smaller driver's field of vision. If this is not considered during ETC installation, it will increase the driver's blind spot. Install it behind the rearview mirror on the right side to avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a solar panel on the back for self-charging. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Do not remove it randomly once installed: The button in the middle of the adhesive is an anti-removal lever connected to a switch. Once the electronic tag is installed on the windshield, the anti-removal lever will be pressed in. If removed randomly, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. Points to note when using ETC: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic toll deduction for the wrong vehicle; the recognition speed for ETC lanes is 20 kilometers per hour. Driving too fast may result in failure to read the vehicle's device information and toll deduction failure; when using a debit card linked to ETC, insufficient balance may also cause toll deduction failure.
1
0
Share

How much is the fine and how many points are deducted for speeding 80% over the limit?

Speeding 80% over the limit: According to the "Scoring Standards for Road Traffic Violations," driving 50% or more over the speed limit results in 12 penalty points and a fine. Below is extended information about vehicle speed: 1. Concept of Vehicle Speed: Vehicle speed generally refers to the speed of a moving car. It indicates the distance a car travels per unit of time, commonly measured in kilometers per hour or meters per second. 2. Spot Speed: Spot speed is the instantaneous speed of a car passing a specific point on the road. The arithmetic mean of a set of spot speed observations is the average spot speed. Spot speed is widely used in traffic engineering as a basis for setting road design speeds, installing traffic control facilities, determining traffic management methods, implementing traffic improvement measures and their economic analysis, exploring speed trends of various vehicle types, and evaluating the effectiveness of road traffic facilities, traffic management, and improvement measures.
10
2
Share

How to Use the Handbrake, Lift or Lower?

When starting, the handbrake needs to be lowered, and when parking, the handbrake needs to be pulled up. Additional Information: 1. Remember to Engage the Handbrake When Parking: Some drivers forget to engage the handbrake after parking, resulting in the car moving without a driver and causing accidents. Especially on slopes, ensure the car is in gear and the handbrake is engaged, waiting for the vehicle to stabilize before exiting. 2. Handbrake is Often Used in Conjunction with Neutral Gear: Even during brief stops like at red lights, engaging the handbrake can prevent the car from rolling on uneven roads and give your right foot a short break. Use nearby stationary objects as a reference to check for any movement. 3. Lower the Handbrake When Starting: When starting the car, make sure to lower the handbrake. Remember to press the button and ensure it is fully lowered. Many beginners forget to release the handbrake, which can cause damage to it.
1
3
Share

What is the difference between polo-sport and polo?

polo-sport and polo have the following differences: polo-sport is a clothing brand under the U.S. Polo Association; polo is a compact car under Volkswagen. Additional information about the Volkswagen polo is as follows: 1. Body dimensions: length 3970mm, width 1682mm, height 1462mm, wheelbase 2470mm. 2. Fuel consumption: 6.5L-8.8L. 3. Engine type: turbocharged (TSI), naturally aspirated. 4. Braking system: disc brakes (front wheels), drum brakes (rear wheels).
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.