What is the power output of the 1.2T Corolla?

1 Answers
Jamie
07/29/25 4:21pm
Toyota Corolla's 1.2T engine delivers a maximum horsepower of 125 hp, with a peak power output of 85kW (116Ps) and maximum torque of 185Nm available between 1500-4000rpm. The 1.2T turbocharged engine is paired with an S-CVT transmission that simulates a 10-speed automatic manual gearbox. Toyota Corolla powertrain configuration: The Toyota Corolla's 1.2T engine produces 125 hp maximum horsepower, 85kW (116Ps) peak power, and 185Nm maximum torque between 1500-4000rpm. It's mated to an S-CVT transmission simulating 10-speed automatic manual shifting. The specifications clearly demonstrate the Corolla's excellence, with 0-100km/h acceleration outperforming competitors in its class. The powertrain calibration is particularly well-tuned for urban driving conditions - even light throttle inputs elicit immediate response, with no perceptible turbo lag from the 1.2T engine, representing this Corolla model's greatest advantage. Toyota Corolla interior features: The Corolla utilizes independent suspension front (MacPherson strut) and rear (double wishbone), with a chassis tuned for robustness, compactness, and balanced handling. Safety equipment includes eight airbags plus ABS anti-lock braking, BA brake assist, VSC vehicle stability control, TRC traction control, HAC hill-start assist, EPB electronic parking brake, and numerous other standard features.
Was this review help?
15
2
Share
More Forum Discussions

What are the differences between the Tiggo 7 Shenxing 1 and Shenxing 2?

Here is an introduction to the differences between the Tiggo 7 Shenxing 1 and Shenxing 2: 1. Configuration: The all-new Land Rover Discovery Sport is abbreviated as "Fayun", symbolizing good luck for the journey ahead. The configuration of the Tiggo 7 Shenxing 1 belongs to the older product line, while the Tiggo 7 Shenxing 2 has newer configurations compared to the Shenxing 1. 2. Price: The all-new Land Rover Discovery Sport is abbreviated as "Fayun", symbolizing good luck for the journey ahead. The Tiggo 7 Shenxing 1 was released earlier than the Shenxing 2, and its price has dropped, making it more affordable. The Tiggo 7 Shenxing 2 is a newer product with a relatively higher price.
5
4
Share

How Far Should You Switch to Low Beam When Meeting Another Vehicle at Night?

When meeting another vehicle at night, you should switch to low beam when the oncoming vehicle is more than 150 meters away. On narrow roads, narrow bridges, or when meeting non-motorized vehicles, low beam should be used. Article 48 of the Road Traffic Safety Law states: On roads without central isolation facilities or center lines, when motor vehicles meet oncoming traffic, the following rules should be observed: 1. Slow down and keep to the right, maintaining a necessary safe distance from other vehicles and pedestrians. 2. On obstructed road sections, the vehicle on the unobstructed side has the right of way. 3. On narrow slopes, the vehicle going uphill has the right of way. 4. On narrow mountain roads, the vehicle not next to the mountain has the right of way.
8
0
Share

Is it true that the Besturn T99 has many malfunctions?

It's an isolated phenomenon. The malfunction rate of the Besturn T99 is not high. Here is more information about the T99: Configuration: The car's continuous waistline divides the vehicle into two parts, while the parallel design of the upper and lower window lines gives it a visual length that exceeds its class. The vehicle is equipped with a 2.0T turbocharged four-cylinder engine and an Aisin 6-speed automatic transmission, as well as a triple-screen setup consisting of a 2.3-inch LCD instrument panel, a central control screen, and an HVAC touchscreen. Power: The car uses a CA4GC20TD-32 model 2.0T four-cylinder engine, which is very powerful. Body dimensions: The Besturn T99 has a length of 4800mm, a width of 1915mm, a height of 1685mm, and a wheelbase of 2870mm.
2
1
Share

Can I make a U-turn when dropping someone off at the highway entrance?

U-turns are not allowed at highway entrances because highways prohibit U-turns. If you have not yet entered the highway and there is a designated U-turn point, you can make a U-turn without incurring penalties or fines. However, if you have already entered the toll station, you cannot make a U-turn and must proceed to the next toll exit. Making a U-turn or reversing on the highway will result in an immediate 12-point deduction on your driver's license. Additional information: Highway: A highway, abbreviated as expressway, refers to a road specifically designed for high-speed vehicle travel. Regulations for highways vary by country, region, era, and academic field. Hazards of U-turns: They pose significant risks to vehicles traveling normally behind. It is difficult for other drivers to anticipate the intentions of a vehicle making a U-turn, and they may not realize it is reversing, leading to rear-end collisions or even chain-reaction accidents.
20
1
Share

How to Distinguish Between Wiper Types?

Wiper types can be distinguished as follows: Traditional frame-style wipers use support points on the frame to press the wiper blade against the glass, while beam-style wipers distribute pressure evenly across the entire blade. A wiper system refers to the blade structure installed in front of the windshield, composed of an electric motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. Its function is to clear rain, snow, and dust that obstruct the view on the windshield. Wiper maintenance methods include: 1. Cleaning the wiper blades and windshield promptly after car washing; 2. Regularly inspecting the wiper blades for cracks or damage; 3. Keeping the wipers in an upright position when parking outdoors for extended periods.
4
1
Share

Is N the Reverse Gear?

N is not the reverse gear. Below is an introduction to the gears: 1. P gear: P-Parking, representing the parking gear. When you reach your destination and turn off the engine, place the gear in the P position. At this time, the wheels and transmission are locked, preventing the car from rolling downhill. 2. N gear: N-Neutral, representing the neutral gear. For brief stops, you can place the gear in the N position, such as when waiting at a red light. Of course, you need to step on the brake at this time to avoid the risk of rolling downhill. 3. R gear: R-Reverse, representing the reverse gear. Engage the R gear when you need to reverse. When shifting into reverse, ensure the car's speed is stable. Never suddenly shift into reverse while accelerating forward. 4. D gear: D-Drive, the most commonly used forward gear. As the name suggests, shift into D gear when driving forward, then step on the accelerator.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.