···
Log in / Register

What is the power output of Chery Kunpeng Engine?

6Answers
DeBrynlee
07/29/2025, 10:19:13 PM

According to recent information, the Chery Tiggo 8 Kunpeng Edition is set to officially launch on July 17. The new model will be equipped with the Kunpeng Engine, a 2.0TGDI engine, with an official 0-100 km/h acceleration time of 7.5 seconds. Here are the details about the Chery Tiggo 8: 1. Exterior Design: The new model largely continues the Tiger Leap family design language. The multi-layered grille is decorated with dot-matrix stripes, paired with matrix headlights on both sides, creating a bold and rugged visual atmosphere. The body side lines are smooth and rounded with virtually no sharp angles. The rear features a full-width LED light bar, and the quad exhaust layout at the bottom further highlights its powerful performance. 2. Dimensions: The new model measures 4700/1860/1746 mm in length, width, and height respectively, with a wheelbase of 2710 mm. 3. Interior: The 7-inch full LCD instrument panel, 12.3-inch floating central touchscreen, and air conditioning touch control area—totaling three display screens—create a strong sense of technology. The new model is equipped with the Lion Zhiyun 3.0 infotainment system, featuring AI facial recognition, AI smart assistant, remote vehicle control, voice interaction, and other functions. 4. Powertrain: The new model is powered by a 2.0T turbocharged engine paired with a 7-speed dual-clutch transmission, delivering a maximum power output of 254 horsepower and a peak torque of 390 Nm.

Was this review help?
101
Share
EverettFitz
08/15/2025, 04:25:22 AM

Chery's Kunpeng Power is actually their self-developed high-efficiency engine system. I've driven the Tiggo 8 equipped with this powertrain, and it feels really great. The core is a 1.6-liter turbocharged engine that delivers around 197 horsepower and 290 Nm of torque, providing super-fast response and making overtaking in the city a breeze. The fuel consumption is also quite friendly, averaging about 6-7 liters per 100 km, which is much more economical than my previous old car. It utilizes direct fuel injection and advanced thermal management technology, achieving a thermal efficiency of over 38%, meaning more complete combustion, strong power, and no wasted fuel. After being installed in vehicles, models like the Tiggo 7 and 8 have become very popular. If you're looking to upgrade your ride, this powertrain is a cost-effective choice. While power numbers are important, comfort and safety in daily driving are what truly matter.

Was this review help?
20
Share
Expand All
StEmiliano
10/21/2025, 01:36:36 AM

As a Chery owner, I've been driving the Tiggo 8 Pro with the Kunpeng engine for over half a year, and the experience has been quite solid. The 1.6-liter engine delivers 197 horsepower, providing stable high-speed cruising and fuel consumption controlled at around 6.5 liters per 100 km. The savings on fuel are enough for several extra meals. The engine responds quickly, with no sluggishness at low speeds, and handles uphill climbs effortlessly. The key is that this technology is combined with a hybrid version, achieving a low fuel consumption of just 4 liters per 100 km in battery-depleted mode, making it highly economical. I think it's ideal for commuters, with power and torque figures being the highlights, but the real benefit lies in its practicality and reliability. Maintenance is straightforward, requiring only regular checks on the spark plugs. Since using it, the car has had fewer minor issues, and long trips are worry-free—peace of mind is what truly matters.

Was this review help?
14
Share
Expand All
DiHope
12/04/2025, 01:04:15 AM

Chery's Kunpeng Power is their high-efficiency engine, even a novice like me can understand it. Simply put, a 1.6L displacement engine can output 197 horsepower, providing strong and smooth driving. It uses a new design for more complete combustion, making it fuel-efficient with city fuel consumption around 6L per 100km. Installed in models like the Tiggo 7, it starts quickly with low noise. I think it's better than regular engines—easy to understand specs, but the real experience is quiet and hassle-free. No technical jargon, just easy to use!

Was this review help?
5
Share
Expand All
KalebLee
01/24/2026, 02:25:59 AM

Chery Kunpeng Power is quite strong from an environmental perspective, and I pay attention to the topic of automotive emission reduction. It boasts a thermal efficiency of over 38%, with low emissions, and the hybrid version consumes around 4 liters per 100 kilometers, significantly reducing CO2. The power output is 197 horsepower, but the key lies in technologies like intelligent control that minimize waste, benefiting air quality. After installation, tailpipe emissions in urban driving are greatly reduced. I believe sustainability is crucial, and driving this car saves money in the long run while being eco-friendly. Although the parameter numbers may seem small, the impact on the planet is significant, and that's worth praising.

Was this review help?
16
Share
Expand All
StAlex
04/20/2026, 01:30:04 AM

Chery's launch of Kunpeng Power marks progress for domestic automakers. I know a bit about automotive history. With a thermal efficiency of 38% and 197 horsepower output, it competes with international brands. Significant R&D investment has been made, applied to models like the Tiggo 8, with user feedback praising its strong power and fuel efficiency at 6.5L/100km. This achievement stems from Chery's independent R&D, elevating China's engine technology. I believe this technology has its story - while the specs are impressive, its true strength lies in strong market competitiveness.

Was this review help?
11
Share
Expand All
More Q&A

What Causes the Engine Warning Light to Illuminate in a Jaguar XEL?

The engine warning light may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or signal interruption occurs, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel/oil quality issues: Failure to use the fuel and engine oil as specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor fuel mixture combustion: Incomplete combustion can cause engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as an alert. Spark plug failure, ignition coil malfunction, fuel pump issues, or fuel line blockages can all result in poor combustion. Turbocharging problems: Issues with the intake boost piping or turbocharger can also trigger the engine light. The most common is turbocharger damage, often accompanied by oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: Air intake issues may lead to engine pipe blockages, potentially causing the warning light to activate. A dirty or uncleaned air filter can restrict proper airflow. Exhaust system faults: Exhaust problems can trigger the engine light. Common causes include rear oxygen sensor failure, catalytic converter issues, or exhaust camshaft and bearing failures. Using leaded gasoline, improper lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions may damage this component. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or doesn't properly communicate with the engine control unit, it may prevent normal engine operation while illuminating the warning light. When the engine warning light appears, follow these steps: First check if the engine operates normally - observe for vibrations, black smoke, etc. If present, avoid restarting the engine. Note: Never restart if the light is red. If the engine starts normally, turn off the vehicle for 5-10 minutes. Without pressing the brake pedal, press the start button once or turn the key halfway to the ON position (without engaging the clutch). The system will perform a self-check - observe if the warning light turns off after 5-10 seconds. If the light remains on, visit a service center immediately. Technicians can use diagnostic tools to retrieve trouble codes and perform targeted repairs.
116
Share

Is There Any Impact from Switching from 95 Octane to 92 Octane Fuel Long-Term?

Switching from 95 octane to 92 octane fuel long-term does have an impact. Occasionally using the wrong gasoline grade only requires switching back to the correct grade after consumption, but long-term use of the wrong gasoline grade can lead to the following effects: For vehicles designed for lower octane fuel, using higher octane fuel will not cause damage, but the increase in octane rating alters the fuel's ignition point, leading to delayed combustion in the engine. This results in reduced engine power and thermal efficiency, with the practical experience being poorer performance. For vehicles designed for higher octane fuel, using lower octane fuel can cause engine knocking. Because the octane rating is significantly lower, the reduced ignition point causes premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance is created during the upward stroke. This resistance makes the engine run very unevenly. If the knocking is imperceptible, it only increases noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring. In addition to checking the appropriate gasoline grade in the vehicle's manual, you can also find it on the fuel tank cap. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with a compression ratio between 8.6-9.9 should use 92 octane fuel, while those with a compression ratio between 10.0-11.5 should use 95 octane fuel. However, with the use of new technologies, the compression ratio alone cannot determine the required gasoline grade. High compression ratio engines can be tuned to use lower octane fuel because other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline grade, the higher the octane rating and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane.
108
Share

What are the hidden functions of the 2011 Teana key?

The hidden functions of the 2011 Teana key include closing the windows after turning off the engine, finding the car in a parking lot, automatically opening the trunk, and remotely opening the windows. Relevant information about the Teana is as follows: 1. Exterior Design: The 2021 Teana newly introduced red-black and white-black dual-color exteriors. Except for the entry-level 2.0L model, all models are equipped with 17-inch or larger wheels, LED headlights, and LED daytime running lights. Additionally, the model also launched the Phantom Edition package, which includes blackened rear emblems, chrome front grille trim, wheels, rear spoiler, Midnight personalized rear emblem, and other unique exterior accessories. 2. Interior Design: The 2021 Teana upgrade features piano-black door trim panels, wood-grain center console and gear lever box, and exquisite soft material wrapping to enhance the cabin's luxury feel. Moreover, the Phantom Edition package also includes luxury LED welcome pedals and exclusive floor mats. 3. Powertrain: The 2021 Teana offers a 2.0L naturally aspirated engine and a 2.0T turbocharged engine, paired with the new intelligent XTRONIC-CVT continuously variable transmission equivalent to an 8AT gear range. The 2.0T model is equipped with the VC-TURBO variable compression ratio turbocharged engine, which allows the engine compression ratio to intelligently and continuously switch between 8:1 (high performance) and 14:1 (high efficiency). The 2021 Teana can accelerate from 0 to 100 km/h in just 6.42 seconds, with a minimum fuel consumption of 6.6L per 100 km.
119
Share

Should the car be started when charging a phone inside?

Starting the car is necessary when charging a phone inside. Here are the precautions for starting a car: 1. Check the surroundings of the vehicle: Walk around the car to inspect its exterior and the environment, ensuring there are no obstacles in front or behind the car. Check the ground where the car is parked for any suspicious oil stains or water stains, verify if the front and rear light assemblies are damaged, and ensure the tire pressure is adequate. 2. Inspect the internal condition of the car: Check if the engine oil and coolant levels are sufficient, and if the front and rear lights, signal lights, and dashboard are functioning properly. The main focus is to examine the technical condition inside the car. Lift the engine hood, pull out the dipstick to check if the oil level is normal, and unscrew the radiator cap to verify if the water level is normal.
112
Share

What is the method to reset the maintenance light on Changan Suzuki?

Turn on the ignition switch, briefly press the right-side information display selection handle until the information display screen goes black and then stops. Press and hold the left-side mileage button for more than 5 seconds until the oil lock display appears on the screen, then release the button. The display area will show the oil lock. Release the button and press it five times consecutively within 2 seconds, completing the action within 3 seconds. The oil lock will turn off, indicating the operation is complete.
115
Share

Why does the car key not respond when locking the car?

If the car key does not respond when locking the car, it may be due to a malfunction of the remote lock or aging of the remote transmitter antenna in the vehicle, which prevents the remote key from working properly. Another possible cause is strong magnetic signal interference around the car. Here are some precautions for car keys: 1. Do not place it near electronic devices: Since smart keys use low-intensity radio waves, they may not function properly under magnetic interference. Frequently placing the smart car key together with a mobile phone can lead to malfunction, as the chip inside the smart key may sometimes be affected by the phone's frequency, temporarily disabling the remote function. Additionally, if the smart key receives high-intensity radio waves, it may excessively drain the battery. Therefore, avoid placing the smart key near electronic devices such as TVs or personal computers. 2. Avoid rough handling: Smart keys are most vulnerable to being dropped from a height. While the outer shell of most smart keys is sturdy, the internal circuitry is less resistant to impact and can easily be damaged by severe collisions. Furthermore, if water enters the smart car key, it can burn out the internal circuitry, also causing remote failure. If the smart car key gets wet, do not shake it vigorously, as this can cause water to spread to other critical circuits. Also, avoid using the remote to unlock the car immediately, as this may damage the circuit board. 3. Use the correct battery: The battery life of a smart car key is approximately one year. Battery consumption varies depending on the frequency and distance of key usage. Replacing the battery of a smart car key requires caution, as any mistake can damage the circuit board inside the key. Before replacement, the owner should carefully review the battery replacement diagram. When disassembling the key, pay attention to the original positions of all components and try to use an original battery. During installation, ensure the correct orientation of the battery's positive and negative terminals to avoid incorrect placement. Additionally, be careful with the sealing ring at the bottom of the key to prevent damage during replacement, which could otherwise burn out the circuit board.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.