What is the power of the Song Max pure electric motor?

Is the body steel strength of Hongqi HS5 high?

The body material strength of Hongqi HS5 reaches 1500MPa (submarine-grade steel material), because Hongqi HS5 uses three layers of steel plates: 1. Outer steel plate: It serves as the body covering panel. This layer of steel is very thin, generally about 0.7-1.0mm in thickness, and can be stamped into various complex curved body appearances. 2. Inner steel plates: The inner two layers are generally structural components, with a thickness of about 1-2mm. These are mainly responsible for enhancing the structural rigidity of the body. The highest-strength hot-formed steel is usually used for the middle layer, forming a sandwich-like structure.

18

3

Share

What is the difference in centimeters between 10-inch and 12-inch tires?

10-inch and 12-inch tires have a radius difference of 1.65cm. Below is a detailed introduction to car tire specifications: 1. Specification model representation: Tires are important components of a car, and there are many specification models for tires, with different models suitable for different types of vehicles. The specification model identification is usually on the sidewall of the tire, represented by a series of alphanumeric characters, corresponding to the tire's tread width, aspect ratio, type, rim size, load index, and speed rating. 2. Speed rating: Based on the maximum speed they can withstand, tires can be divided into different speed ratings from A to Z, with the A grade further divided into eight levels from A1 to A8. Generally, the further back the letter representing the tire's speed rating is in the alphabet, the better the tire's performance.

10

5

Share

What is the Difference Between Auto Start-Stop Batteries and Regular Batteries?

Auto start-stop batteries differ from regular batteries in the following aspects: 1. Lifespan: Dedicated auto start-stop batteries have a higher number of charge cycles and a longer lifespan compared to regular batteries, typically lasting over 6 years, which is 3-8 times longer than regular batteries. Their plates are harder than those of regular batteries, preventing the active material from easily detaching, making them suitable for vehicles with start-stop systems. Regular batteries usually last around 2 years. 2. Battery Capacity: Start-stop batteries have a larger capacity and can charge and discharge rapidly. Ordinary lead-acid batteries cannot handle multiple high-current discharges in a short time, as their separators do not allow ions to pass through quickly. 3. Price: Start-stop batteries are manufactured using stamping processes, which involve higher technical requirements and costs, leading to an overall higher price. Once core technologies are mastered, domestically produced start-stop batteries will have a significant price advantage in the future.

9

5

Share

What are the common active safety devices in cars?

Seat belts, airbags, ABS (Anti-lock Braking System), ESP (Electronic Stability Program), etc., are all common active safety devices inside vehicles that can activate when the vehicle is close to losing control. Seat belts: Known as the 'life belt,' it is an extremely effective safety protection device. During a collision or emergency braking, the seat belt firmly secures the driver and passengers in their seats, preventing them from hitting the windshield or being thrown out of the vehicle. Airbags: In the event of a collision, airbags rapidly deploy to prevent the occupants from hitting the steering wheel or window glass. ABS (Anti-lock Braking System): It automatically prevents wheel lock-up during emergency braking, ensuring that the vehicle's direction can still be adjusted. ESP (Electronic Stability Program): It helps prevent the vehicle from skidding in emergency situations.

3

2

Share

What Are the Risks of Not Transferring Ownership of a Sedan?

If ownership is not transferred, the person whose name is on the "Motor Vehicle Registration Certificate" will be held legally liable in the event of an accident where the driver flees, even if that person was not the one driving the vehicle. Below are the specific details: 1. Risks of not transferring ownership: After purchasing a used car, it is essential to complete the ownership transfer. If ownership is not transferred, the buyer only has the right to use the vehicle but not ownership, as the name on the "Motor Vehicle Registration Certificate" remains that of the original owner, posing a significant risk to the buyer. 2. Ensure complete documentation: When buying a used car, always check if the vehicle's documentation is complete. If the documentation is incomplete and the transfer cannot be processed, there is no need to proceed with inspecting the car further. If incomplete documentation prevents the vehicle from being legally driven on the road, there is also no need to continue inspecting the car. After confirming the vehicle's documentation, proceed to evaluate its condition and price.

18

5

Share

Where is the designated stopping point on a slope?

The designated stopping position on a slope should meet the following requirements: the front bumper of the car should be aligned with the pole line, the wheels should be within 30cm of the solid line on the right side of the road, and the solid line should not be pressed. Operation method: Upon hearing the instruction "stop at the designated point on the slope," immediately turn on the right turn signal, check the rearview mirror, wait for 3 seconds, and then steer the vehicle towards the right side of the area. When approaching the roadside, steer slightly to the left and then quickly straighten the wheels to the right, ensuring the right side of the car remains parallel to the roadside and within 50cm (using the white line of the stopping point ahead as a reference, do not cross the white line). Press the clutch and slowly approach the stopping point. When the midpoint of the right side of the car's hood aligns with the stopping sign, press the foot brake, stop the car, pull the handbrake (until two clicks are heard), and turn off the turn signal. The key points of the test mainly involve mastering the coordination skills of the accelerator pedal, parking brake, and clutch pedal: Correctly grasp the contact point of the clutch. Incorrect operation can easily cause the clutch to slip, the clutch friction plate to burn, and in severe cases, even lead to the burning and scratching of the clutch pressure plate and flywheel end face, as well as the annealing of the clutch pressure spring. Correctly grasp the timing of releasing the parking brake lever. Incorrect operation can cause severe wear of the rear brake pads when starting the car. Correctly grasp the timing and force of pressing the accelerator pedal (throttle). When starting, avoid suddenly releasing the clutch pedal or pressing the accelerator pedal too hard. Incorrect operation can damage the car's clutch.

1

5

Share

What is the power of the Song Max pure electric motor?

Is the body steel strength of Hongqi HS5 high?

What is the difference in centimeters between 10-inch and 12-inch tires?

What is the Difference Between Auto Start-Stop Batteries and Regular Batteries?

What are the common active safety devices in cars?

What Are the Risks of Not Transferring Ownership of a Sedan?

Where is the designated stopping point on a slope?

Where to Insert the Memory Card in Trumpchi M6?

Where is the USB port of Mercedes-Benz GLA200?

Where is the air intake of the Kia K3 located?

How Much Horsepower is 104 Kilowatts?