What is the power of a gasoline generator?

1 Answers
AnaFitz
07/30/25 2:05am
Generator power is generally 1900w. Automotive generators can be classified into the following 4 types: 1. Ordinary AC generator: Also known as a silicon rectifier generator, it requires a voltage regulator when in use; 2. Integral AC generator: A generator where the generator and regulator are integrated into one unit. For example, the engines of Buick cars are equipped with CS-type generators, including three different models: CS-121, CS-130, and CS-144; 3. AC generator with pump: The pump installed on the AC generator with pump is a vacuum pump, not a vacuum booster pump. The vacuum booster pump is part of the automotive braking system; 4. Brushless AC generator: A generator that does not require brushes.
Was this review help?
10
5
Share
More Forum Discussions

What is the normal tire pressure for Geely Emgrand GS?

The recommended tire pressure range for Geely Emgrand GS is 2.4-2.5 bar. Due to seasonal factors, the normal tire pressure may vary slightly between different models. In winter, the tire pressure can be appropriately increased by 0.2 bar, while in summer it can be reduced by 0.1 bar. This data complies with the international GBT2978-2008 standard. The Geely Emgrand GS comes equipped with a tire pressure monitoring system that automatically alerts the driver without manual operation. The Emgrand GS tire pressure monitoring system does not have a digital display. The tire pressure warning light will only illuminate when the tire pressure is too low (below 1.8 bar) or too high (above 2.8 bar). If the warning light is off, it indicates normal tire pressure. Generally speaking, a tire pressure above 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overextends tire cords, reducing tire elasticity and increasing the load on the vehicle during driving. Hazards of insufficient tire pressure: Increases friction coefficient with the road surface, leading to higher fuel consumption; Makes the steering wheel heavy and prone to deviation, compromising driving safety; Increases movement of tire components, causing abnormal heat due to excessive rolling; Weakens cord and rubber functions, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; Multiplies friction between the tire and the ground, sharply increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light illuminates (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), it is generally due to one of the following three reasons: Abnormal tire pressure: The system typically alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset promptly, the system may still record the previous data, causing the indicator light to illuminate. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. In such cases, the only solution is to replace the sensor with a new one.
3
4
Share

How to Drive in Deep Water?

Drive slowly in deep water using a low gear. Here are some precautions when driving through water: 1. Slow down and stop if necessary: Be cautious of 'hydroplaning' when driving on water-covered roads. At high speeds, water between the tires and the road surface cannot be displaced, leading to a loss of friction between the vehicle's weight and the road, increasing the risk of hydroplaning. Therefore, reduce speed to avoid hydroplaning and prevent accidents. 2. Do not restart the engine if it stalls in water: Once the engine stalls due to water, restarting it may cause significant damage to the engine.
12
0
Share

What Causes the Airbag Yellow Light to Illuminate?

The following are the related reasons for the airbag yellow light illuminating in a car: 1. Airbag malfunction: The airbag system has encountered a fault. 2. Wiring and sensor malfunction: When a collision occurs while the car is in motion, the airbag sensor first receives the impact signal. If the impact reaches the specified intensity, the sensor activates and sends a signal to the electronic controller. Upon receiving the signal, the electronic controller compares it with its stored data. If the conditions for airbag deployment are met, the drive circuit sends an activation signal to the gas generator in the airbag module.
4
1
Share

How Long is the Service Life of Passenger Car Tires?

The service life of passenger car tires is 4 to 5 years. The functions of tires are: 1. To transmit driving force, braking force, and steering force for vehicle operation; 2. To support vehicle loads; 3. To reduce and absorb vibrations and impacts during driving, avoiding severe vibrations that may damage vehicle components. Tire maintenance methods include: 1. Regularly cleaning stones from tire treads; 2. Minimizing exposure to direct sunlight; 3. Promptly checking tire pressure; 4. Paying attention to suspension maintenance; 5. Regularly inspecting front wheel alignment; 6. Adopting careful driving habits, choosing road surfaces carefully to avoid objects that can puncture or scratch tires, and steering clear of chemical spills that may corrode tires.
9
1
Share

How to Replace Car Shock Absorbers?

The method for replacing car shock absorbers is as follows: 1. Loosen the wheel nuts in a diagonal sequence; 2. Lift the car using a jack; 3. Remove all wheel nuts in a diagonal sequence and take off the wheel; 4. Disassemble the brake caliper; 5. Remove the control arm fixing bolts and loosen the fixing nuts of the spring strut arm; 6. Open the engine hood, loosen the fixing nuts of the shock absorber on the car body, and remove the shock absorber. The function of the shock absorber is to suppress the oscillation when the spring rebounds after absorbing shocks and the impact from the road surface, to accelerate the attenuation of the frame and body vibration, and to improve the driving smoothness of the car.
2
1
Share

Can a driver's license be used for a loan?

No, although a driver's license is also a type of valid identification, an ID card must still be used as the valid document for a loan. Overview: The full name of a driver's license is the motor vehicle driver's license, also known as a 'driver's license.' It is a certificate required by law for individuals who operate motor vehicles. Driving a motor vehicle requires certain driving skills, and those lacking these skills may cause traffic accidents if they drive recklessly. Driving without a license is prohibited. Notes: The permission to drive a vehicle is granted through the issuance of a driver's license. This indicates that obtaining a driver's license is a formal process that must be issued by a specialized authority.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.