What is the positioning of the BMW M4 model?

1 Answers
DavidLee
07/30/25 6:32am
The BMW M4 is positioned as a mid-size car. The BMW M4 belongs to the M series of BMW and is a performance vehicle. Below are some extended details about the BMW M4: 1. The entire lineup is equipped with a 3.0-liter inline 6-cylinder turbocharged engine, available in high-power and low-power tuning variants, paired with a 7-speed dual-clutch transmission. 2. The low-power version has a maximum power output of 317 KW and a maximum torque of 550 N·m, while the high-power version delivers a maximum power of 331 KW and a maximum torque of 550 N·m. All models use direct fuel injection. 3. The drivetrain is exclusively rear-wheel drive. In terms of suspension, the front suspension features a MacPherson strut independent setup, and the rear suspension uses a multi-link independent configuration, with all models equipped with adjustable suspension.
Was this review help?
12
3
Share
More Forum Discussions

How to Determine if You Can Pass Through a Narrow Road?

Make a rough estimation of the road width and your vehicle's width. For cars equipped with a 360-degree panoramic camera, you can slowly pass through by following the trajectory lines on both sides. Here is some relevant information: 1. Reduce speed: Drive slowly on narrow lanes, increase the distance between vehicles to avoid scratches with other cars. Especially when passing through narrow lanes with parked cars on the roadside, drive even slower and stay alert, as blind spots may appear at this time. 2. Driving skills: During normal driving, pay extra attention when passing through narrow lanes, drive slowly and observe more, avoid being reckless to prevent scratches. Try to straighten the car body as much as possible when passing through, and only start steering after confirming the rear wheels have cleared the obstacle; when meeting another car, leave a reasonable margin in advance, and if necessary, stop on the spot to let the other party pass first. Anticipate and prepare in advance to minimize the chance of scratches.
12
2
Share

Is 1 Bar of Oil Pressure Normal?

Diesel engine oil typically operates within a normal range of 3-5 bars of pressure, while at idle, the pressure is around 1 bar. If the oil pressure drops below 0.1 MPa during hot idle conditions or below 0.2 MPa at medium or high speeds, it indicates excessively low oil pressure, which can compromise engine lubrication. The causes of low oil pressure are as follows: 1. Insufficient oil volume: This issue is relatively easy to resolve by simply topping up with the same type of oil. 2. Contaminants in the oil: Impurities can clog oil passages, leading to low oil pressure, necessitating an oil change. 3. Overly thin oil: Thin oil has poor sealing properties, allowing leakage through gaps and resulting in low pressure. In this case, replace the oil with a higher viscosity grade. 4. Faulty oil pressure sensor: A damaged sensor may misread oil conditions, requiring professional attention.
4
2
Share

What causes a car to suddenly stall while driving and fail to start?

There are several main reasons why a car may fail to start after stalling: 1. Fuel system: Check for issues such as a damaged fuel pump, ruptured fuel lines, clogged carburetor inlet, or an empty fuel tank. In such cases, the car can actually start if you remove the air filter, press the accelerator pedal, and observe fuel spraying from the carburetor's acceleration nozzle, indicating the fuel system is functioning properly. 2. Electrical system: Issues like low-voltage power failure or engine overheating causing anti-explosion system failure during driving can lead to stalling. Check the ignition and starter switch. Remove the central high-voltage wire and start the engine with the starter. If there's no spark from the central high-voltage wire, it indicates an electrical system problem. 3. Low-voltage circuits: A short circuit in the low-voltage circuit can cause intermittent stalling. Inspect the low-voltage circuits.
7
2
Share

Where is the cabin air filter located in the Audi Q5

The cabin air filter in the Audi Q5 is located inside the glove compartment on the passenger side. The functions of the cabin air filter are: 1. To separate dust, pollen, and abrasive particles from the air; 2. To ensure clean air in the passenger compartment and prevent bacterial growth. Below is some information about air filters: 1. According to the filtration principle, air filters can be divided into several types, including filtration type, centrifugal type, oil bath type, and composite type. 2. The commonly used air filters in engines mainly include inertial oil bath air filters, paper dry-type air filters, and polyurethane filter element air filters. 3. During installation, whether the air filter is connected to the engine intake pipe via flange, rubber hose, or direct connection, it must be tightly secured to prevent air leakage. Rubber gaskets must be installed on both ends of the filter element.
20
0
Share

What to Do When Running Out of Gas on the Highway?

Here are some temporary solutions when your car runs out of gas: 1. Temporarily pour alcohol into the fuel tank. When your car is about to run out of gas, there will be a warning on the display. At this time, you should immediately look for the nearest gas station. If the nearest gas station is too far away, you can temporarily pour alcohol into the fuel tank. When alcohol mixes with gasoline, it expands the fuel volume, allowing the car to travel a bit further. 2. Ask other vehicles for help. If you run out of gas on the highway, you can seek assistance from passing vehicles. 3. Exit the highway promptly. If there are no other options, you can drive your car off the highway to refuel and then re-enter the highway afterward. 4. Call for roadside assistance: If your car has already run out of gas and none of the above methods are feasible, you can call for roadside assistance and wait for help.
5
2
Share

How to Solve Engine Oil Leakage in Cars?

Engine oil leakage in cars can be resolved by: 1. Generally, if the valve cover is leaking oil, which is more common in cars used for about 5 years, replacing the valve cover is necessary. 2. For engine timing cover oil leaks, removing and reapplying sealant will suffice. If the oil pan drain plug is loose or damaged, tightening or replacing it is the solution. 3. Regular maintenance is crucial; avoid causing damage to the car for temporary convenience. Additional tips: 1. Ensure the car is assembled under extremely clean conditions, with no bumps, scratches, burrs, or other debris on the parts' working surfaces. 2. Follow operational procedures strictly; seals should be installed correctly to prevent improper placement or deformation. 3. Understand the performance specifications and usage requirements of seals, and replace failed components promptly.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.