What is the position of the car gear lever called?

1 Answers
NovaAnn
07/30/25 6:57am
The position of the car gear lever is called the gear shift console. Here is a detailed introduction about it: 1. Introduction 1: The gear lever, also known as the operation lever, is used on the car transmission and its main function is to support the car's gear shifting. 2. Introduction 2: The gear lever is a rod-like component, commonly divided into 1-2 gear levers, 3-4 gear levers, and five-gear levers. 3. Introduction 3: From a technical perspective, electronic gear levers have a high degree of freedom, with flexible and varied positions and forms. Currently, representative types include BMW's electronic wiring type, Mercedes-Benz's column-mounted type, Land Rover's rotary knob type, and Lincoln's button type.
Was this review help?
15
4
Share
More Forum Discussions

Is the M20E Engine Imported?

M20A engine is not imported, but there is not much difference in specifications and product quality. The same type of CHR is imported. The following is a detailed introduction about the Toyota IZOA M20A engine: 1. Related data: The Toyota M20C engine has a maximum power of 131kW, peak torque of 207Nm, displacement of 2.0L, and adopts modular design. It uses a bore-stroke ratio of 1:1.2; compression ratio of 13:1; and a 41° angle between intake and exhaust valves, among other modular designs. 2. High compression ratio: To achieve higher thermal efficiency, the Toyota M20C engine adopts a long-stroke setting of 80.5×97.6 (mm) with a high compression ratio of 13:1, reducing fuel consumption and emissions.
14
4
Share

What are the dangers of a broken lower control arm?

Here are the specific consequences that may result from damage to the lower control arm of a vehicle: Broken lower control arm: The wheel may detach from the vehicle body, rendering the vehicle unable to move; Deformation or bending: The alignment relationship between the wheel and the vehicle body is disrupted, causing all four-wheel alignment parameters to fail, which can lead to the vehicle pulling to one side or even the wheel rubbing against the chassis; Aging or failure of the control arm bushing: This can result in metallic collision noises when the lower control arm moves. Below is additional information about the lower control arm: 1. Introduction: The lower control arm is a mechanical tool that, through different linkage configurations, automatically adjusts the camber angle, toe angle, and provides the rear wheels with a certain steering angle during suspension contraction. 2. Function: The lower control arm is used to support the vehicle body and absorb vibrations during driving.
3
5
Share

Is it serious if the motorcycle engine yellow light is on?

It needs to be checked. The following is a detailed introduction to the motorcycle engine yellow light being on: 1. Reasons: Poor gasoline quality can lead to incomplete combustion of the air-fuel mixture in the cylinder, causing the engine light to come on. Carbon deposits on the top of the piston can result in poor atomization, leading to incomplete combustion and triggering the engine light. During cold starts, especially when the temperature drops sharply, the engine light may come on due to the computer's temperature correction issues, but it will stabilize once the temperature drops to a certain level and remains constant. 2. Others: The engine yellow light indicates that there is a fault in the engine. It can still be driven temporarily, but inspection and repair are necessary. The engine indicator light is used to display the working condition of the vehicle's engine.
14
3
Share

Why is the Hill Start Assist Not Working?

The activation of the Hill Start Assist function requires the following conditions to be met: the gear lever is in any position other than P; the accelerator pedal is not pressed; the vehicle is in a stationary state; the parking brake is not engaged. The specific details are as follows: 1. Under the premise of meeting the above basic conditions, when the vehicle is stopped and the driver further presses the brake pedal, the system activates the Hill Start Assist control. 2. When the driver firmly presses the brake pedal and hears a "beep" sound, the Hill Start Assist system takes effect (working time is two seconds), and the brake light will illuminate to automatically generate braking. If the Hill Start Assist system does not work at all, it is recommended to go directly to a 4S shop for a computer diagnostic test.
14
3
Share

Can I add water if the coolant is insufficient?

It is not advisable to add water when the coolant is insufficient because water has a low boiling point, which makes it prone to boiling over, and its cooling effect is poor. Additionally, water has a high freezing point, making it susceptible to freezing, which can affect the car's operation if the engine or radiator freezes. Moreover, water contains impurities and ions, which can lead to the formation of scale and cause blockages. Coolant serves multiple purposes, including antifreeze, cooling, anticorrosion, and anti-scaling. Although coolant also contains water, it is soft water, specifically distilled water, which has undergone deionization and softening treatment. If the engine coolant is insufficient, you can add soft water, but be cautious about the amount added. Adding too much can alter the coolant's boiling and freezing points. Do not add hard water like tap water, as it can have adverse effects.
10
0
Share

Will a Rear-End Collision with Full Liability Result in Points Deduction? How Many Points?

Generally, no points will be deducted. Relevant Regulations: A rear-end collision with full liability is considered a traffic accident. According to the Road Traffic Safety Law, the responsible party must compensate the other party involved. Additionally, based on relevant laws and regulations, after a traffic accident occurs, the traffic management department of the public security authorities will no longer impose penalties for traffic violations. Precautions for Rear-End Collisions: Protect the Scene: In the event of a rear-end collision on the road, the driver must stop immediately and protect the scene; Negotiate or Report to the Police: If the rear-end collision does not cause personal injuries, the parties involved can negotiate compensation matters on their own. If personal injuries occur, the driver must immediately provide first aid to the injured and promptly report to the traffic police on duty or the traffic management department of the public security authorities.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.