···
Log in / Register

What is the plastic panel under the windshield?

1 Answers
DavidLee
09/07/25 6:18am
The plastic panel under the windshield is called the windshield lower trim panel. Below is an introduction to the lower trim panel and the windshield: Solutions for a fallen lower trim panel: First, check the vehicle to see if the plastic clips are still present and determine the cause of detachment—whether it's due to damage or simply coming unclipped. If damaged, purchase new clips for replacement. If unclipped, use a flathead or Phillips screwdriver to remove the unclipped plastic clip and reinstall it. Determine whether the detached part is the main trim panel or the side plugs. For the main panel, purchase new clips, remove the old ones with a flathead or Phillips screwdriver, and install the new clips for repositioning. For the side plugs, reinstall the original parts, which come with plastic clip limiters. Function of the windshield: The windshield differs from other glass panels in a car. It is made of laminated glass, while other panels use tempered glass. The windshield provides a survival space for passengers. Upon impact, it shatters into small, blunt-edged fragments, minimizing injury risks. Modern windshields primarily use laminated tempered glass or zoned tempered laminated glass, capable of withstanding strong impacts.
Was this review help?
1
0
Share
More Forum Discussions

What are the effects of excessive and insufficient free travel in a car clutch?

The effects of excessive and insufficient free travel in a car clutch are as follows: 1. Excessive free travel leads to incomplete separation, difficulty in gear shifting, accelerated wear of the driven disc, pressure plate, and flywheel, and reduced service life of the clutch; 2. Insufficient free travel causes the clutch to not fully engage, resulting in slipping, reduced power output, and accelerated clutch wear. The method to adjust the free travel of a car clutch is to rotate the screw at the connection between the pull rod and the clutch cable. The car clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission.
19
5
Share

Where is the air conditioning switch in an automatic transmission car?

The air conditioning switch in an automatic transmission car is located on the air conditioning control panel. For manual air conditioning, it is the AC button, while for automatic air conditioning, it is the AUTO button. When cooling is needed, press the AC or AUTO button and adjust the cooling intensity, air volume, and air direction. The air conditioning system consists of a cooling device, heating device, ventilation and air purification device, and control system. The functions of the air conditioning system are: 1. To adjust and control the temperature, humidity, air cleanliness, and air flow inside the cabin to an optimal state; 2. To provide a comfortable riding environment for passengers and reduce travel fatigue; 3. To create good working conditions for the driver and ensure driving safety.
10
4
Share

What is the method for removing a tire?

The method for removing a tire is: 1. After turning off the engine, pull up the handbrake; 2. Place heavy objects in front of and behind the wheel to prevent sliding, and set up a triangular warning sign behind the vehicle; 3. Use a wrench to loosen the screws in a diagonal pattern; 4. Place the jack on the side of the tire and lift the vehicle to a certain height; 5. Remove the screws and take off the tire. Situations requiring tire replacement include: 1. Tread wear approaching the wear indicator; 2. Cracks or bulges appear; 3. The tire has reached its service life. The method for inflating a tire is: 1. Inflate after the tire has cooled down; 2. The air used for inflation must not contain moisture or oil to prevent deterioration and damage to the rubber inside the tire; 3. Use a pressure gauge to check the air pressure to avoid over-inflation.
9
3
Share

How to Remove the Mercedes-Benz Hood Ornament?

Mercedes-Benz Hood Ornament The method for removing the Mercedes-Benz hood ornament is: Open the engine hood, then use pliers to rotate the securing clip of the ornament by 90 degrees to detach it. Mercedes-Benz models include: Mercedes-Benz A-Class, S-Class, GLS, CLA, and Maybach S-Class. Taking the 2020 Mercedes-Benz CLA200 as an example, it belongs to the compact car category with body dimensions of: length 4692mm, width 1830mm, height 1422mm, and a wheelbase of 2729mm. The 2020 Mercedes-Benz CLA200 is equipped with a 1.3L turbocharged engine, delivering a maximum horsepower of 163PS, maximum power of 120kW, and maximum torque of 250Nm.
17
1
Share

What brand is the engine of the Borgward BX5?

The engine of the Borgward BX5 is developed by Borgward. It is equipped with a 1.4L turbocharged engine, with a maximum power of 110kW and a maximum torque of 250Nm. The maximum power speed is 5500rpm per minute, and the maximum torque speed ranges from 1750 to 4000rpm per minute. It is paired with a 6-speed automatic transmission. The Borgward BX5 is a compact SUV with body dimensions of 4490mm in length, 1877mm in width, and 1675mm in height, with a wheelbase of 2685mm and a fuel tank capacity of 60L. It uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
3
0
Share

What are the reasons for the engine indicator light to illuminate?

Engine indicator light illuminates due to: 1. Poor gasoline quality, leading to incomplete combustion of the air-fuel mixture; 2. Excessive carbon buildup on spark plugs, causing poor performance; 3. Malfunction of the oxygen sensor or air flow sensor; 4. Engine knocking; 5. Damage to the coolant temperature sensor; 6. Failure of the high-pressure fuel pump, resulting in cylinder misfire. Solutions for the engine indicator light illumination include: 1. Using high-quality gasoline; 2. Warming up the engine for one to two minutes upon starting; 3. Reading the fault codes to identify and repair the issue. The engine indicator light is one type of warning light; other warning lights include: oil pressure indicator, fuel indicator, battery indicator, and coolant temperature indicator.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.