What is the percentage of overloading when an 11-passenger car seats 11 people?

1 Answers
NadiaLee
07/29/25 4:40pm
An 11-passenger car seating 11 people is overloaded by 80%. The following are the hazards of driving an overloaded vehicle: 1. Damage to road infrastructure: Due to the load of overloaded vehicles far exceeding the design load of roads and bridges, it causes road surface damage, bridge fractures, and significantly shortens the service life. 2. Increased danger: Overloaded vehicles have increased mass and inertia, leading to longer braking distances and higher risks. If severely overloaded, it may cause tire blowouts, sudden deviation, brake failure, rollovers, and other accidents due to excessive tire load and deformation. Additionally, overloading affects the vehicle's steering performance, making it prone to accidents due to loss of steering control. 3. Impact on road traffic flow: Overloaded vehicles cannot reach normal speeds, occupying lanes for extended periods, directly affecting the smooth flow of traffic.
Was this review help?
11
0
Share
More Forum Discussions

Are New Energy Vehicle License Plates Subject to Traffic Restrictions?

New energy vehicles are generally not subject to traffic restrictions, but it is essential to check local regulations as policies may vary by region. For instance, some cities only exempt pure electric vehicles from restrictions, while other types of new energy vehicles, such as range-extended electric vehicles and plug-in hybrid electric vehicles, may still be subject to traffic restrictions. Additional relevant information is as follows: 1. If the second letter of the license plate is F, it indicates a plug-in hybrid electric vehicle, which is not a pure electric vehicle and falls under the category of restricted vehicles. 2. New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources (or conventional vehicle fuels with new onboard power devices), integrating advanced technologies in vehicle power control and drive systems, resulting in vehicles with advanced technical principles, new technologies, and innovative structures.
3
5
Share

What are the types of transmission fluid?

Transmission fluid types include dexron, dexronⅡ, dexronⅢ, and ATFF. The function of transmission fluid is to keep the shifting system clean, provide lubrication, ensure the normal operation of the transmission, and extend the lifespan of the transmission components. The role of the transmission: to change the gear ratio, expand the range of torque and speed changes of the driving wheels, adapt to frequently changing driving conditions, and allow the engine to operate under favorable working conditions. The hazards of not changing transmission fluid for a long time: 1. Damage to the transmission's shift control mechanism; 2. Abnormal wear of gears and clutch plates inside the transmission; 3. Affecting the normal operation of the transmission, leading to damage to the transmission valve body.
7
3
Share

Does a Non-Functioning High-Mount Stop Light Affect Annual Inspection?

High-mount stop light not working will definitely affect the vehicle inspection, as checking the brake lights involves verifying if all the vehicle's brake lights are functioning properly: 1. If you observe carefully, you'll notice a square or rectangular red brake light positioned higher in the middle at the rear of some new car models; 2. This light is technically called a high-mount stop light, generally positioned higher than the brake lights on both sides of the car's rear. The purpose of the high-mount stop light is to alert vehicles following behind, thereby helping to prevent rear-end collisions; 3. Vehicles without a high-mount stop light, especially low chassis cars and micro cars, may have their rear brake lights positioned too low and often lack sufficient brightness during braking. This makes it difficult for drivers of vehicles following behind, particularly those in higher chassis vehicles like trucks, coaches, and buses, to see clearly.
19
0
Share

What is the setting method for the trip computer display on the Audi Q5?

Audi Q5 trip computer display setting method: Control settings are made through the button area on the left side of the steering wheel. The MODE button on the steering wheel is used to select pages, while the scroll wheel serves as the switch to browse the next option. Four different display pages can be accessed: speedometer, instant fuel consumption meter, range meter, and average speed meter. The onboard computer, also known as the trip computer or electronic control module, processes data from various sensors in the car and sends signals to control engine operation. The Audi Q5 features a distinctive large grille front face, stylish and attractive overall design, smooth and flowing body lines. It is equipped with a 2.0TFSI four-cylinder inline engine and a 7-speed Stronic dual-clutch transmission, delivering ample power output and smooth gear shifting.
7
5
Share

What is the door opening style of the BYD Han?

The BYD Han features a coach door (suicide door) opening style. Here are some key details about the BYD Han: 1. Exterior: The BYD Han is a mid-to-large size sedan under the BYD brand, with a wheelbase of 2920mm, and dimensions of 4980mm in length, 1910mm in width, and 1495mm in height. 2. Configuration: The front suspension uses MacPherson independent suspension, while the rear employs a multi-link independent suspension system, which enhances both handling and ride comfort. 3. Powertrain: The 2.0L turbocharged engine delivers 192 horsepower and 320 N·m of maximum torque, featuring direct fuel injection technology with an aluminum alloy cylinder head and block. Paired with this engine is an electric motor producing maximum power of 180kW and maximum torque of 330 N·m.
20
1
Share

How to Reset the Tire Pressure Monitoring Warning Light After Pressure Check?

Tire pressure monitoring warning light can be cleared by restarting the tire pressure monitoring system after resetting it. Below are the reasons why the dashboard displays the tire pressure monitoring warning light after a pressure check and requires a restart: 1. It indicates insufficient air pressure in one of the four wheels, likely due to a punctured or leaking tire. It's best to visit a tire repair shop to check if the tire pressure is normal. 2. You can inflate both sides to the same pressure or perform a tire pressure reset on the dashboard. As long as the tire pressure is confirmed to be normal, there's no immediate issue. You can visit a 4S shop for a reset when convenient or refer to the owner's manual to perform the reset yourself. 3. If the tire pressure is normal, there's no need to worry too much. Some larger car washes or repair shops with diagnostic computers can also clear the warning.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.