What is the penalty for speeding between 10% and 20% in urban areas?

1 Answers
LaDominic
07/29/25 2:38pm
Speeding between 10% and 20% in urban areas will result in a 3-point deduction. Below are the relevant regulations for speeding by ordinary vehicles: 1. Driving medium-sized or larger passenger or cargo vehicles, school buses, or hazardous material transport vehicles on highways or urban expressways at speeds exceeding 20% above the limit will result in a 12-point penalty. 2. Driving medium-sized or larger passenger or cargo vehicles, school buses, or hazardous material transport vehicles on roads other than highways or urban expressways at speeds exceeding 50% above the limit will result in a 12-point penalty. 3. Driving medium-sized or larger passenger or cargo vehicles, school buses, or hazardous material transport vehicles on highways or urban expressways at speeds exceeding but not reaching 20% above the limit will result in a 6-point penalty. 4. Driving medium-sized or larger passenger or cargo vehicles, school buses, or hazardous material transport vehicles on roads other than highways or urban expressways at speeds exceeding 20% but not reaching 50% above the limit will result in a 6-point penalty. 5. Driving medium-sized or larger passenger or cargo vehicles or hazardous material transport vehicles on roads other than highways or urban expressways at speeds exceeding but not reaching 20% above the limit will result in a 3-point penalty.
Was this review help?
13
4
Share
More Forum Discussions

What gear should be used when driving an automatic transmission car uphill?

When driving an automatic transmission car uphill, it is necessary to use a lower gear. There are several key points to pay attention to: 1. Shift the gear to L (Low) position. This locks the transmission between 1st and 2nd gears. Climbing hills requires greater torque to propel the vehicle upward and overcome slope resistance. 2. D1 position locks the gear in 1st, while D2 position locks between 1st and 2nd gears. 3. S (Sport) mode can also be used for hill climbing. Although S mode provides powerful performance for effortless uphill driving, prolonged use may cause engine overload and potential damage. 4. M (Manual) mode is another option. This manual shifting feature allows drivers to manually upshift or downshift using "M+" and "M-" controls, offering more precise operation according to actual driving conditions during climbing or overtaking. 5. Many modern vehicles are equipped with Hill Start Assist systems, which not only prevent rollback but also ensure more stable starts on inclines.
11
0
Share

What is the wheel model of the Cadillac ATSL?

Cadillac ATSL is equipped with 17-inch and 18-inch double five-spoke wheels. Here are some details about the Cadillac ATSL: 1. Exterior: The Cadillac ATSL adopts a distinctive and rugged style. The vehicle features numerous muscular lines on the hood and sides, showcasing a tough appearance. Although it is also a mid-size sports sedan, the Cadillac ATSL's design stands out as more unique. 2. Interior: The layout of the center console buttons resembles the brand logo, and the extensive use of piano black lacquer and leather-wrapped interior significantly enhances the ATSL's interior quality. 3. Features: Standard equipment includes knee airbags, BOSE audio system, one-touch start, keyless entry, and engine start-stop technology. The ATSL is powered by a 2.0T high-performance inline four-cylinder turbocharged engine, which has been awarded as one of the 'Top Ten Engines.' It delivers a maximum horsepower of 279 hp, a maximum power of 205 kW, and a maximum torque of 400 Nm, paired with a new 8-speed automatic transmission.
4
3
Share

How to Adjust the Rearview Mirror on Audi A4L?

Audi A4L's rearview mirror adjustment is located on the door armrest. First, rotate the knob to the left or right rearview mirror button, and then you can adjust the desired mirror in all directions. The "0" mark represents the neutral position. When the knob is rotated to the neutral position, it can prevent all previous settings from being accidentally disrupted. The correct adjustment angles for the rearview mirrors are as follows: 1. Central Rearview Mirror: Proper adjustment of the central rearview mirror greatly aids the driver's visibility. First, adjust the mirror to be parallel to the horizon. The mirror surface should slightly face the driver to clearly see vehicles approaching from behind. 2. Left Rearview Mirror: Since the driver's seat is on the left, the adjustment of the left rearview mirror is particularly important. It is recommended to adjust the car's image to occupy 1/4 of the mirror surface and the horizon to occupy 1/2. If too little of the car's image is visible, you won't see vehicles close to the rear; if too much is visible, it becomes difficult to see vehicles that are already partially parallel. 3. Right Rearview Mirror: The adjustment method for the right rearview mirror differs slightly from the left. Here, the car's image should still occupy 1/4 of the mirror surface, but the horizon should be adjusted to 2/3 of the right rearview mirror.
16
1
Share

How is the Volkswagen EA211 engine?

The following are the advantages and disadvantages of the EA211 engine: 1. Lightweight: The EA211 series engine is constructed entirely of aluminum, from the valve cover at the top of the engine to the oil pan at the bottom, all made of aluminum alloy. This makes it significantly lighter than the previous EA111 series. The benefits of lightweighting for front-wheel-drive vehicles (all models equipped with this series of engines are front-wheel-drive) include reducing some undesirable characteristics of front-wheel drive, such as understeer during cornering, nose-diving during braking, and faster wear on the front tires. 2. Fuel-efficient: In addition to weight savings, the EA211 series engine also incorporates fuel-saving technologies. The cylinder deactivation system in the EA211 series automatically shuts off the second and third cylinders when the engine is operating under medium to low loads, thereby reducing fuel consumption. Compared to models without this technology, fuel consumption per 100 kilometers is reduced by approximately 0.4L. 3. Improved efficiency: As one of the core technologies of Volkswagen's MQB modular platform, the EA211 engine features dual variable valve timing for both intake and exhaust, and the direct injection system uses a 5-hole injector with an increased injection pressure of 200bar. These technologies collectively enhance the engine's operational efficiency to some extent. 4. Insufficient power: Among the EA211 series engines, the 1.4T variants with two power outputs are one of the main models. While delivering fuel economy, the EA211 also sacrifices some power. For example, the 1.4T engine in the Bora has a maximum power of only 96 kW and a maximum torque of 225 Nm. The 1.4L models may exhibit insufficient power when climbing hills fully loaded. However, after tuning, the high-power version of the EA211 engine can reach up to 110 kW.
13
3
Share

What to Do When the Vacuum Brake Booster System Fails?

Solutions for vacuum brake booster system failure include: 1. Replace the battery wiring and controller; 2. Replace the vacuum pump motor or electronic delay module; 3. Replace the pressure switch or pressure switch wiring; 4. Reconnect the ground wire in the power socket; 5. Replace the vacuum pump seal. The vacuum brake booster system is also known as the vacuum servo brake system. The servo brake system adds a set of power-assisted devices powered by other energy sources to the manual hydraulic brake system, allowing both human power and engine power to be used as braking energy sources.
7
1
Share

What Does Tap Braking Mean?

Tap braking mainly refers to the following points: 1. Initially press the brake lightly until the vehicle noticeably decelerates. 2. Release the brake slightly (not completely), and when the vehicle is about to lose braking restraint, press the brake again, repeating this cycle. The Road Driving Skills Test for Subject 3 includes: preparation for driving large buses, tractors, city buses, medium-sized buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, and special small automatic transmission passenger vehicles for the disabled; simulated nighttime lighting test; starting; driving in a straight line; gear shifting operations; changing lanes; pulling over; going straight through intersections; turning left at intersections, etc.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.