What is the penalty for speeding 10% to less than 20% in a tunnel?

1 Answers
KalebLynn
07/29/25 4:55pm
For ordinary vehicles on highways, the penalties for speeding are as follows: 1. Speeding within 10% of the prescribed speed limit will not be penalized for the time being; 2. Speeding more than 10% but less than 20% of the prescribed speed limit will result in a fine of 200 yuan and 3 demerit points; 3. Speeding more than 20% but less than 50% of the prescribed speed limit will result in a fine of 200 yuan and 6 demerit points; 4. Speeding more than 50% of the prescribed speed limit will result in a fine of 2000 yuan and 12 demerit points. Relevant information about speed limits is as follows: 1. Introduction to speed limits: Speed limits generally refer to the regulation of vehicle speeds within a certain numerical range for a section of road of a certain length. 2. Purpose of speed limits: The main purpose is to pre-warn drivers to reasonably control their speed in subsequent sections of the road ahead, prevent the dangers of speeding, and ensure driving safety. Speed limits are an indispensable and most important part of road transport safety.
Was this review help?
19
3
Share
More Forum Discussions

What are the reasons for smoke and a burning smell from a car's air conditioning compressor?

There are two main reasons for smoke and a burning smell from a car's air conditioning compressor: 1. Blocked air intake: This prevents hot air from being discharged, leading to heat buildup that can melt plastic components. The solution is to first check if the air intake is clear, then manually test whether the air vents are functioning normally, and listen for any unusual noises inside the air conditioning unit. 2. Aging car wiring: The electrical heating circuit may get burned by the heat, or internal plastic components may shift and overheat. If this is the cause, the car's air conditioning system needs to be disassembled for inspection and repair.
8
2
Share

Are Traffic Lights Still Effective During Road Construction? Will Running a Red Light Be Photographed?

Running a red light during road construction will not be photographed. Below are the relevant details: 1. Principle: There are three conditions for running a red light. The capture must include three photos: the first shows the front wheels crossing the warning line, the second shows the rear wheels crossing the warning line, and the third shows the vehicle crossing the warning line on the opposite side of the intersection. Only when all three photos are complete can they be submitted to the police, who will then issue a fine notice. When the vehicle's front just passes the crosswalk and the yellow light turns on, the photo system delays for 2 seconds before activating; when the red light turns on, the system is already active. 2. Additional Information: Regardless of the reason, running a red light is a violation of the law and will be punished accordingly. However, the video equipment at intersections is very cautious when capturing information about red light violations each time, requiring a 'three-step review.' This means that to confirm a vehicle has run a red light, there must be three photos as evidence.
9
3
Share

Is the Dash Cam Safe in a Hot Car During Summer?

Dash cams are very safe in hot cars during summer. Related information: 1. Reason: Dash cams are not flammable or explosive items. As long as they are unplugged when not in use, they are safe. Moreover, once the interior temperature reaches 65℃, the dash cam will automatically shut down and activate its protection mechanism. Therefore, having a dash cam installed in the car during summer will not cause any issues. 2. Additional details: Most dash cams have an operating temperature range of -20℃ to 70℃ and a storage temperature range of -40℃ to 85℃. The operating temperature refers to the ambient temperature range in which the product can function properly without damage. Beyond this range, the product may not work correctly.
16
0
Share

Which icon is the car's air conditioning switch?

The icon for the car's air conditioning switch is AC, and if it's an automatic air conditioning system, the switch icon will be AUTO. To activate the air conditioning cooling function, press the AC or AUTO button, and the air conditioning will start blowing cold air. You can then adjust the fan speed and direction according to your needs. The fan speed control button is usually depicted as a small fan icon, allowing you to select the desired airflow by turning the knob. The temperature control button typically displays a thermometer or has red and blue markings on either side. Turning the knob towards the red area gradually increases the temperature, while turning it towards the blue area decreases it. The air direction adjustment can be either button-operated or knob-operated, with the icon showing a seated person accompanied by directional arrows to indicate airflow direction.
19
0
Share

Can a car without a sunroof have one installed?

A car without a sunroof can have one installed, but it is not recommended. Privately modifying a sunroof can pose safety hazards to both the driver and passengers. This is because vehicles are designed, manufactured, and undergo testing and crash tests before leaving the factory, ensuring they meet the standards set by national quality and technical supervision departments. Privately modifying a sunroof alters the vehicle's original structure and safety technical parameters. Factory-installed sunroofs are designed with additional cross and longitudinal beams to maintain the vehicle's safety performance and have been inspected by relevant authorities. Furthermore, some vehicles may experience water leakage and severe roof corrosion due to poor sealing after sunroof installation, which can compromise driving safety.
15
5
Share

What is the fuel consumption of the Teana Duke 2.5V6?

The comprehensive fuel consumption of the Teana Duke 2.5V6 is 5.9-6.7L/100km. Currently, there are 6 models of the Teana Duke 2.5V6 on sale. The Fashion Edition, Intelligent Navigation Edition, and Comfort Edition have a comprehensive fuel consumption of 5.9L/100km. The Intelligent Navigation Edition and Intelligent Edition have a comprehensive fuel consumption of 6.6L/100km. The Premium Navigation Edition has a comprehensive fuel consumption of 6.7L/100km. The above figures are NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 7.0-9.0L/100km. When driving, the following 5 tips can help reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and accelerate slowly. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Light acceleration and braking, early braking: While driving, press the accelerator lightly to avoid sudden increases in engine RPM and prevent the car from shaking during movement, thereby making the car more fuel-efficient. By anticipating road conditions and accelerating or braking slowly and evenly, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (approximately 0.2 in metric units relative to standard pressure of 2.4), fuel consumption increases by 1%. Regular vehicle maintenance or checks: Timely oil changes can reduce carbon buildup (carbon deposits can cause ignition issues, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires). Regularly check and replace the air filter if dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per mileage. Close windows while driving. Driving with windows open increases wind resistance, which in turn increases the resistance the car faces, requiring more power and thus increasing fuel consumption.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.