What is the penalty for removing the rear seats of a minivan?

1 Answers
StGeorge
07/29/25 10:23pm
The penalty for removing seats from a minivan is that the traffic management department of the public security authority will order the restoration of the original condition and may impose a warning or a fine. Below is relevant information: 1. Regulations: Removing the rear seats of a minivan violates Article 31 of the "Road Transport Regulations," which states that vehicles that are scrapped, illegally modified, or otherwise non-compliant with national regulations shall not be used for road transport operations. 2. Seats can be laid flat: For 7-seater vehicles, the third row of seats can be laid flat for carrying items. However, the law only permits loading in the trunk and on the roof rack. If all rear seats are removed, it is not allowed.
Was this review help?
6
3
Share
More Forum Discussions

What is the suitable tire pressure for Audi A6 in summer?

Audi A6's summer tire pressure is more suitable at 2.2bar. For roads with large bumps: On roads with large bumps, it is appropriate to reduce the tire pressure by 0.1-0.2bar from the standard tire pressure. For long-distance high-speed driving, the tire pressure should not be too low. It is advisable to increase the tire pressure by about 0.2bar from the lower limit of the standard tire pressure. New and old tires: For new tires, the pressure can be increased by about 0.2bar from the standard tire pressure. For old tires, it is appropriate to reduce the tire pressure according to the standard. If the wear is severe, follow the lower limit of the standard tire pressure. Summer and winter: In winter, the tire pressure can be increased by about 0.2bar based on the standard tire pressure. In summer, follow the lower limit of the standard tire pressure. If the car is parked outdoors in summer, the pressure can generally be about 0.1bar lower than the standard to avoid tire blowouts due to high temperatures.
11
3
Share

Can You Still Drive If the Transmission Is Broken?

If the transmission is broken, you should not continue driving. The function of the transmission is to change the speed of the vehicle and the torque on the driving wheels, as well as to enable reverse driving. The transmission is equipped with input and output shaft sensors, which are primarily responsible for gear shifting. If the transmission malfunctions, it will affect the normal shifting process. Continuing to drive with a faulty transmission may result in the gears slipping into neutral, sudden jamming, or the locking of the driving wheels, leading to accidents and severe damage. Inside the transmission, there are gears and bearing components in motion. Even a small damaged part can trigger a serious chain reaction, potentially causing the entire transmission to fail or even break the transmission housing.
3
0
Share

What kind of oil is used in the Honda K24Z1 engine?

Honda K24Z1 engine uses 5W-20 oil. The specific functions of the oil are as follows: Shock absorption: When the pressure at the cylinder port of the engine rises sharply, the load on the piston, piston pin, connecting rod, and crankshaft bearings suddenly increases. This load is transmitted and lubricated through the bearings, providing a cushioning effect against the impact load. Rust and corrosion prevention: The lubricating oil can adhere to the surface of parts, preventing contact with water, air, acidic substances, and harmful gases. Lubrication and friction reduction: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing shells. To prevent excessive wear on the parts, an oil film needs to be established between the two sliding surfaces. A sufficiently thick oil film separates the surfaces of the relatively sliding parts, reducing wear. Cooling: The oil can carry heat back to the oil tank and then dissipate it into the air, helping the radiator to cool the engine.
12
5
Share

Where are the most common locations for refrigerant leaks in a Prado's air conditioning system?

Refrigerant leaks in a Prado's air conditioning system mostly occur at the two connection points between the outdoor unit and indoor unit pipes. Steps to address automotive air conditioning refrigerant leaks: When there's a refrigerant leak in car air conditioning pipes, the first step is to inject some fluorescent dye into the pipeline to locate the exact leak point. After identifying the leak, welding repair can be performed to fix cracks or pinholes in the air conditioning pipes. For sections that cannot be repaired, replacement with new piping is necessary, followed by recharging with new refrigerant. Common causes of air conditioning refrigerant leaks: Pipeline seal failure, corrosion of the condenser or evaporator unit. Overheating of the compressor may melt the seals at compressor connection points. Improper installation of flare fittings and shut-off valve surfaces. During replacement of refrigeration system components, improper secondary installation may create leak points in the pipeline and refrigeration system.
20
0
Share

Is the Q5L domestically produced?

Q5L is domestically produced, and this model has an extended wheelbase, serving as the successor to the Audi Q5. The Audi Q5L is a mid-size SUV under the Audi brand, with body dimensions of 4753mm in length, 1893mm in width, and 1659mm in height, and a wheelbase of 2908mm. In terms of power, the Audi Q5L is equipped with two engines: a low-power version of the 2.0-liter turbocharged engine and a high-power version of the 2.0-liter turbocharged engine. The low-power 2.0-liter turbocharged engine delivers a maximum power of 140 kW and a maximum torque of 320 Nm, while the high-power 2.0-liter turbocharged engine offers a maximum power of 185 kW and a maximum torque of 370 Nm.
11
5
Share

How to Remove the High-Pressure Oil Pipe of the Ford Mondeo Power Steering Pump?

Ford Mondeo Power Steering Pump High-Pressure Oil Pipe Removal Method: Remove the power steering fluid reservoir, then remove the right front headlight, use an open-end wrench to loosen the screws along the oil pipe, disconnect all connections to the vehicle body, and finally remove the screws connected to the steering gear. The Ford Mondeo is a mid-size sedan under Changan Ford, with body dimensions of 4873mm in length, 1852mm in width, and 1470mm in height, and a wheelbase of 2850mm. In terms of exterior design, the Mondeo features redesigned grille, front fog lights, and wheel rims, with the grille changed to a mesh pattern and chrome trim added to the tail lights to enhance texture and sportiness, while the rest remains largely unchanged.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.