What is the penalty for driving at 50 in a 40 speed limit zone?

2 Answers
DelBennett
07/24/25 8:48pm
According to the formula for calculating speeding: (60-40)/40×100%=20/40×100%=50%. Therefore, if you drive at 60km/h in a 40km/h speed limit zone, the calculation shows you are speeding by 50%, which according to regulations will result in 12 penalty points and a fine. If a motor vehicle violates the speed limit without causing consequences, the traffic management department will issue a warning under the following circumstances: 1. Exceeding the speed limit by less than 50%: driving over the speed limit by less than 50% on roads with a speed limit below 60km/h; 2. Exceeding the speed limit by less than 10%: driving medium or large passenger trucks, school buses, or hazardous material transport vehicles exceeding the speed limit by less than 10% on roads other than highways or urban expressways. Driving vehicles other than the above-mentioned types exceeding the speed limit by less than 10%. 3. Driving below 20% of the speed limit: driving a motor vehicle on a highway below 20% of the speed limit.
Was this review help?
15
3
Share
Haley
08/11/25 11:17am
It's quite common to get penalized for driving at 50 in a 40 km/h speed limit zone. I made a similar mistake last time and was caught, resulting in a 150-yuan fine and 3 demerit points. According to traffic police, exceeding the speed limit by less than 10 km/h is considered a minor violation, usually punishable by a fine ranging from 100 to 200 yuan and 1 to 3 demerit points. The key issue is that drivers only have 12 points per year – accumulating too many means having to attend remedial classes or retake tests, which is a huge hassle. Safety-wise, 50 km/h is significantly faster than 40 km/h, doubling the braking distance, and accidents at this speed can be severe. I recommend using navigation apps with speed limit alerts or developing the habit of checking the dashboard to control speed. After all, fines are minor compared to the value of life. Don't wait for a ticket to regret – proactive speed control is the smart approach.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

What is the fuel tank capacity of the Honda URV?

The fuel tank capacity of the Honda URV is 57 liters, as officially announced. The Honda URV requires 92-octane gasoline, with a fuel consumption of 7.2 to 8.7L per 100 kilometers. A full tank can cover a distance of 655 to 792 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked capacity.
11
3
Share

What are the reasons for the trunk lid opening by itself?

Reasons for the trunk opening automatically: 1. Problem with the lock block; 2. The latch is too dry and lacks lubrication; 3. The pull rod inside the handle is not engaged; 4. The trunk switch is damaged. The trunk door lock is controlled by the computer board, which opens the door lock through button touch control. Some high-end models can open the trunk from the central control area. Like electric doors, an electric trunk refers to the trunk being opened and closed electrically, and some cars also have a remote control function. To open the trunk, simply press the button in the car, and the trunk will open by itself. To close the trunk, press the close button inside the trunk, and the trunk will close by itself.
5
1
Share

Where are the VIN codes generally located on a vehicle?

Automotive VIN codes are typically located on the left side of the dashboard and the lower side of the windshield. The position of the VIN code varies among different vehicle models, but most are in highly visible locations. For example, some models may have the VIN code on the vehicle's nameplate, the body near the upper part of the right front shock absorber, or the trunk area. The VIN code consists of 17 characters, hence it is commonly referred to as the 17-digit code. It contains information about the vehicle's manufacturer, year, model, body type and code, engine code, and assembly location. Correctly interpreting the VIN code is crucial for vehicle owners to accurately identify the model and perform proper diagnostics and repairs.
10
2
Share

Is Renault a Joint Venture Car?

Renault is divided into Dongfeng Renault and imported Renault. If it is Dongfeng Renault, it belongs to a joint venture car; if it is imported Renault, it does not belong to a joint venture car. In terms of dimensions: Dongfeng Renault is a joint venture brand of French Renault, with a length, width, and height of 3735mm, 1579mm, and 1515mm respectively, and a wheelbase of 2423mm. In terms of appearance: The front face design of this car is fashionable and expressive, showcasing a stylish and dynamic temperament. The air intake grille is lowered overall, and the outer chrome frame is removed, highlighting the bold and grand style of the SUV model. In terms of interior: The dashboard of this car features a satin finish, with buttons and knobs adorned with chrome decorations, exuding a refined and elegant style. The driver's seat position is adjustable to create an open view, enhancing driving safety and comfort.
1
4
Share

Is Braking the Same as Stopping?

Braking is indeed the same as stopping. Braking refers to the action of bringing a moving locomotive, vehicle, other means of transport, or machinery to a halt or reducing its speed. The general principle of braking involves fixing a wheel or disc on the high-speed shaft of the machine and installing corresponding brake shoes, bands, or discs on the machine base, which generate braking torque under external force. Here are some additional details: 1. Energy supply device: Includes various components that provide and regulate the energy required for braking and improve the state of the transmission medium; 2. Control device: Components that generate braking actions and control braking effects, such as the brake pedal; 3. Transmission device: Includes components that transmit braking energy to the brakes, such as the master cylinder and wheel cylinder; 4. Brake: Components that generate resistance to the movement or tendency of movement of the vehicle.
6
0
Share

What is an Auto Body Repair Technician?

An auto body repair technician's primary responsibility is to perform restorative repairs on vehicle bodies when they suffer damage or deformation. Therefore, these technicians must not only understand the technical parameters and dimensions of vehicle bodies but also master the characteristics of body materials, the transmission of force characteristics, deformation trends, stress points, and production processes such as welding techniques. Below is more detailed information about auto body repair: 1. Introduction: Auto body repair is a technical method in vehicle maintenance, where it equates to auto body repair work. It involves restoring the vehicle body after a collision, encompassing all tasks except for anti-corrosion and decorative spray painting. This includes analyzing body damage, measuring the vehicle body, shaping and straightening the body panels, stress relief welding, as well as assembling and adjusting body accessories. 2. Main Workflow of Auto Body Repair: Body disassembly and assembly, body alignment, and body restoration.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.