What is the penalty for crossing the yellow line when turning left?

1 Answers
CarmenDella
07/30/25 6:59am
Crossing the opposite yellow line when turning left is considered a traffic violation. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," it will result in a deduction of 3 points. Additionally, under the "Road Traffic Safety Law," corresponding fines will be imposed. Below are the relevant details: 1. Details: The violation can be confirmed, but whether there will be a penalty depends on whether the surveillance cameras capture it. If the sensing line is not crossed, no photo will be taken. Even if the sensing line is crossed, it may be difficult to get a clear photo due to the angle. However, it is essential to consciously abide by traffic rules and not take chances. 2. Relevant regulations: Article 90 of the "Road Traffic Safety Law" states: If a motor vehicle driver violates the road traffic safety laws and regulations regarding road traffic rules, they shall be given a warning or corresponding fines. If there are other provisions in this law, the penalties shall be imposed according to those provisions.
Was this review help?
1
3
Share
More Forum Discussions

What are paddle shifters used for?

Paddle shifters are used for gear shifting, serving as a quick-shifting device that significantly enhances driving operability. The operating steps for car paddle shifters are: 1. Fully depress the car's brake pedal; 2. Start the car and let it idle; 3. Set the car's automatic transmission lever to the D position; 4. Use the steering wheel paddle shifters to upshift or downshift. The paddle shifters are located at the back of the steering wheel, with the right paddle for upshifting and the left for downshifting. There are two types of paddle shifters: 1. Fixed type: During steering, the steering wheel rotates while the paddle shifters remain stationary; 2. Follow-up type: During steering, the paddle shifters rotate along with the steering wheel as a whole.
7
3
Share

How many seats does the Cadillac XT6 have?

The Cadillac XT6 is available in 6-seat and 7-seat configurations. The Cadillac XT6 has the following dimensions: length 5056mm, width 1964mm, height 1780mm, with a wheelbase of 2863mm. It features a fuel tank capacity of 73 liters and is structured as a mid-to-large size 5-door 6-seat SUV. The Cadillac XT6 is equipped with a 2.0T turbocharged engine and a 9-speed automatic transmission, delivering a maximum power of 174 kW at 5000 rpm and a maximum torque of 350 Nm. It adopts a front-engine, front-wheel-drive layout, with a front MacPherson strut independent suspension and a rear five-link independent suspension.
6
2
Share

What is the lifespan of a dry dual-clutch transmission (DCT)?

The lifespan of a dry dual-clutch transmission (DCT) is typically three to five years. Here are some methods to extend the life of a dual-clutch transmission: Avoid prolonged low-speed driving: During traffic congestion, low-speed following keeps the clutch plates in a semi-engaged state, with frequent shifting between 1st and 2nd gears. This accelerates wear during the break-in period and reduces the transmission's lifespan. Therefore, in low-speed following situations, you can shift to S mode or manually select 1st gear to avoid excessive shifting between 1st and 2nd gears, which causes severe wear and overheating of the transmission. Use the N (Neutral) gear appropriately: When the transmission is in D (Drive) gear and the brake is pressed, it remains in a semi-engaged state, increasing wear on the clutch plates. In stop-and-go traffic, try to move and then stop intermittently rather than continuously holding D gear and braking, avoiding semi-engaged creeping. It is recommended that if the wait time exceeds one minute, shift to N gear and engage the handbrake. Avoid shifting too quickly: The shifting referred to here is not upshifting or downshifting during driving but switching between R (Reverse) and P (Park) gears using the gear lever. Shifting into R gear before the car has completely stopped or immediately shifting into P gear before the car has fully halted during reversing can cause severe gear impact, commonly known as gear grinding. A common issue with dual-clutch transmissions is that the gears are particularly prone to damage from such impacts.
20
1
Share

What is the fuel consumption of the Kawasaki 321?

The fuel consumption of the Kawasaki 321 is 3.5 liters. Fuel consumption varies slightly depending on each person's driving habits and skills. A smoother driving habit results in lower fuel consumption, while frequent aggressive driving, overtaking, and other high-RPM operations will appropriately increase this figure. Here are some methods to reduce fuel consumption: Check the air conditioning system in summer: Air conditioning malfunctions are a significant cause of high fuel consumption. Poor cooling performance forces the system to increase fan speed and lower temperature to achieve a cooling effect. Frequent hard braking: Frequent hard braking is a primary reason for persistently high fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. Avoid excessive air conditioning in small-displacement vehicles: For vehicles exposed to the sun,
4
0
Share

Can You Continue Driving When the EPS Light Is On?

You should not continue driving when the EPS light is on, as it indicates a fault in the Electric Power Steering system. The function of EPS is to assist the driver in steering by using the power generated by an electric motor, which directly provides steering assistance. This eliminates the need for components such as the hydraulic power steering pump, hoses, hydraulic fluid, drive belt, and engine-mounted pulley, thereby saving energy and protecting the environment. The working principle of EPS is: when the steering wheel is operated, the torque sensor mounted on the steering column continuously measures torque and angle signals. These signals, along with the vehicle speed, are input into the Electronic Control Unit (ECU). After calculation and processing by the ECU, it controls the motor to output the corresponding magnitude and direction of torque. The motor's assist torque is then transmitted through a reducer to increase torque and is applied to the steering system, achieving the vehicle's power steering effect.
7
1
Share

How Long Should You Warm Up Your Car in Cold Weather?

In cold weather, warming up your car for 30 seconds to 1 minute is sufficient. The correct method to warm up your car is: 1. Start the vehicle and keep the air conditioning turned off; 2. Let the engine idle for 30 seconds to 1 minute; 3. Begin driving slowly once the engine runs smoothly; 4. Once the engine coolant temperature gauge rises by 1 to 2 bars, you can drive normally and turn on the air conditioning. The reasons for warming up your car are: 1. After prolonged parking, the engine oil flows back to the oil pan at the bottom of the engine; 2. Before reaching operating temperature, the fuel supply system cannot effectively vaporize gasoline completely due to lower temperatures; 3. Gear oil flows to the lower part of the transmission when parked, leaving the upper part of the transmission unlubricated when cold.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.