What is the passing score for Subject 3 with a full mark of 100?

Precautions After Applying Film to a New Car

Precautions after applying film to a new car are as follows: 1. Avoid rolling the windows up and down for three days after applying the film. 2. Do not wash the car for three days. 3. For vehicles with sunroofs, avoid opening the sunroof while driving, especially at high speeds, for three days. 4. In winter, it is recommended not to roll the windows up and down or wash the car for one week after applying the film. The front and rear films may take about a month to fully dry. During the day, the front film should be exposed to sunlight. Most importantly, do not use the rear window defroster for one month, as turning it on after applying the film in winter can cause bubbles near the heating lines, which cannot be repaired and may lead to unnecessary losses and trouble. 5. If bubbles appear at the edges of the film, visit the installation site for repairs within 24 hours. After this period, the adhesive around the bubbles will have dried, and the film edges will no longer be movable, resulting in creases during the repair process.

15

1

Share

Can You Sleep in the Car with the Heater On?

You should not sleep in the car with the heater on. When the heater is running, it usually operates in recirculation mode. Sleeping in the car for an extended period can lead to dizziness, nausea, and even vomiting due to oxygen deprivation, and in severe cases, carbon monoxide poisoning. Here are some precautions to take when using the heater: 1. Leave a small gap in the window to allow air exchange between the inside and outside of the car; 2. Turn on the external circulation mode when using the air conditioning to promote air exchange; 3. Regularly check the vehicle's exhaust system for leaks to prevent exhaust fumes from entering the cabin and avoid poisoning; 4. Always turn off the engine and open the windows when resting in the car; 5. A comfortable temperature inside the car is around 22 degrees Celsius; 6. Be mindful of dryness when using the heater.

14

4

Share

How Does the Mercedes-Benz Auxiliary Battery Work?

Mercedes-Benz auxiliary battery works by converting chemical energy into electrical energy to power the vehicle's equipment. If there is an auxiliary battery failure, the following two steps should be taken: 1. First, check the generator's belt and plug to see if there is any looseness, as poor contact caused by looseness can be resolved by tightening; 2. Check if the battery is out of power, and if so, charge the battery. Taking the Mercedes-Benz E-Class as an example: its body dimensions are 5078mm in length, 1860mm in width, and 1484mm in height, with a wheelbase of 3079mm. In terms of power, the Mercedes-Benz E-Class is equipped with a 1.5T turbocharged engine, with a maximum power of 135kW and a maximum power speed of 5800 to 6100 rpm, paired with a 9-speed automatic manual transmission.

14

5

Share

What does upgrading to a C1 driver's license mean?

Upgrading to a C1 driver's license refers to the additional licensing process after already obtaining a motor vehicle driver's license, specifically adding the C1 permitted vehicle type after acquiring a driver's license of another class. Conditions for upgrading from a C1 to a B2 driver's license: Age between 20 and 60 years old; height not less than 155cm; holding a C1 driver's license for at least 1 year; no record of accumulating 12 penalty points in the current scoring cycle or the most recent one before application; visual acuity must meet or exceed 5.0 on the logarithmic visual acuity chart; no record of drunk driving or being primarily responsible for a traffic accident causing casualties while holding the C1 license. Specific process for applying for a B2 driver's license: Apply to the vehicle management office for upgrading to a B2 license; complete the application form, submit ID card and physical examination report, and provide the original motor vehicle driver's license; attend theoretical and practical exams as scheduled; the new class of driver's license will be issued by the vehicle management office within 7 working days after passing the exams.

19

4

Share

Where is the Smart Air Filter Located?

The Smart air conditioning filter is located on the right side of the accelerator pedal. By bending down, you can see the cover plate of the air filter. Remove the cover plate to take out the air filter. Functions of the car air conditioning filter: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the car interior. 2. The activated carbon and other materials inside can adsorb moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., providing strong and long-lasting moisture absorption. 3. It can separate solid impurities such as dust, pollen, and grinding particles from the air. 4. It ensures clean air inside the car, prevents bacterial growth, and creates a healthy and comfortable riding environment. It effectively separates solid impurities like dust, core powder, and grinding particles from the air, intercepts pollen, and prevents allergic reactions in drivers and passengers, ensuring driving safety. 5. The filter can trap moisture, preventing the car windows from fogging up easily, thus improving visibility and driving safety. It provides fresh air to the cabin, prevents harmful gas inhalation, ensures driving safety, and offers strong sterilization and deodorization.

10

2

Share

What is the purpose of the laser lights on highways?

Highway green laser lights serve as "anti-fatigue laser lights." At night, these lights illuminate to remind drivers to stay alert and avoid drowsy driving. Additionally, they assist in monitoring speeding, illegal use of emergency lanes, accident-prone areas, various violations near ramps, and traffic flow. Below is how anti-fatigue laser lights work: 1. Highways often have straight roads with few fixed reference points, leading to monotonous driving actions and single-line vision. Prolonged driving under such conditions can cause drowsiness, especially in summer when high daytime temperatures deplete energy. Truck drivers frequently undertake long-distance night trips, increasing the risk of fatigue driving, which has become a key focus for highway traffic authorities to prevent and penalize. 2. Laser lights are installed to stimulate drivers through changing light patterns, alleviating visual fatigue caused by uniform driving environments. After multiple on-site inspections and discussions, highway police positioned these lights on relatively straight sections prone to fatigue driving. The lasers are adjusted to ensure sufficient brightness while providing visual impact. They operate in continuous or strobe modes with a range of 2 kilometers. 3. Laser lights are just one of many anti-fatigue measures employed by highway police. Other measures include flashing warning lights and reflective strips. Ultimately, preventing fatigue driving relies more on raising driver awareness and ensuring adequate rest.

12

3

Share

What is the passing score for Subject 3 with a full mark of 100?

Precautions After Applying Film to a New Car

Can You Sleep in the Car with the Heater On?

How Does the Mercedes-Benz Auxiliary Battery Work?

What does upgrading to a C1 driver's license mean?

Where is the Smart Air Filter Located?

What is the purpose of the laser lights on highways?

Which Changan models are equipped with the Blue Whale engine?

How to Remove the Rear Taillight of a Sagitar?

How to Deal with Steering Wheel Misalignment?

How to Adjust the Time on the New Roewe 350?