What is the pass rate for the first attempt at the Driving Test Part 3?

1 Answers
McZoey
07/30/25 7:43am
There is no exact figure as it varies among driving schools and regions. Below is relevant information about the Driving Test Part 3: 1. Introduction: Part 3 includes the Road Driving Skills Test and the Safe & Civilized Driving Knowledge Test, which are part of the motor vehicle driver's license assessment. It is the abbreviated name for the road driving skills and safe & civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test differs depending on the type of vehicle being licensed. 2. Specific Test Content for Part 3: The Road Driving Skills Test generally includes: preparation before driving, simulated lighting test, starting, driving straight, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting other vehicles, overtaking, making U-turns, and nighttime driving. The Safe & Civilized Driving Knowledge Test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and post-accident handling knowledge.
Was this review help?
16
1
Share
More Forum Discussions

What is the appropriate mileage for the second car maintenance?

The second maintenance of a car is generally performed when the car has driven 10,000 kilometers or after about one year of driving. Below is the relevant introduction to car maintenance: 1. Car maintenance refers to the preventive work of regularly inspecting the car, cleaning and lubricating, and replacing certain parts, checking the car's engine system, cooling system, and other systems. 2. Through regular maintenance, the car can maintain a clean and good condition, extend its service life, clean external dirt, and keep the fuel, oil, and various parts clean. Check the tightness of the connection of each part, inspect the technical condition of lighting and signal systems, use special lubricants for regular lubrication, and keep all parts unobstructed. The first maintenance is usually required when the car reaches 5,000 kilometers, and the first maintenance is free at the 4S shop. Regular maintenance can maintain the best working condition of all parts of the car.
3
0
Share

What are the disadvantages of automotive LED lights?

LED disadvantages are as follows: 1. Heat dissipation issues, poor heat dissipation can significantly shorten lifespan. 2. Energy efficiency of low-end LED lights is lower than energy-saving lamps (cold cathode fluorescent lamps, CCFL). 3. Higher initial purchase cost. 4. Due to the strong directionality of LED light sources, luminaire design needs to consider the special optical characteristics of LEDs. Advantages are as follows: 1. Energy saving and environmental protection: LED lights consume only 1/20 the energy of halogen lamps. 2. Low cost and long lifespan: LED lights from reputable manufacturers can last up to 100,000 hours. 3. High brightness: Much brighter than halogen lamps, making them ideal for brake lights and warning lights (strong penetration). 4. Low voltage safety: LEDs, originally used in electronics, only require 12V DC to operate, eliminating concerns about the 20,000+ volts of xenon lights. 5. Instant illumination: No more waiting for xenon lights to warm up - immediate on/off capability.
14
4
Share

How to Replace the Key Battery for MG?

Method to replace the key battery for MG: 1. Pop open the car key, and there is a gap in the middle that can be pried open directly by hand; 2. After opening the key cover, you will see the battery inside consists of two parts: the battery and a rubber ring. Remove the old battery, replace it with a new one, and then close the key cover to continue using it. Taking the MG5 as an example, its center console features a 12.3-inch combined virtual instrument panel, a 10.25-inch IPS high-definition color screen, a fighter-style electronic gear lever, the leading-in-class Zebra Venus system, and the MG Safety Fast full-time safety assistance system, all of which exude a strong trendy vibe. The full-time safety assistance includes a wealth of functions such as ACC adaptive cruise control, LDP lane departure warning, AEB automatic emergency braking, SAS speed assistance system, and more.
18
3
Share

Which country is Pirelli tires from?

Pirelli is a tire manufacturer from Italy. Pirelli has many products and also provides tires for many car brands. Here is some relevant information about tires: 1. Tires are a very important component of a car because they are the only part of the car that comes into contact with the ground, so tires are related to the driving safety and stability of the car. There are many tire brands, such as Pirelli, Michelin, Hankook, etc. Tire pressure is very important for tires. It is recommended to check the tire pressure frequently during daily use. 2. Tire pressure should not be too high or too low. If the tire pressure is too high, it will reduce the contact area between the tire and the ground, which will reduce the friction between the tire and the ground. If the tire pressure is too low, the tire may experience wave deformation during high-speed driving, which will reduce the service life of the tire and increase the risk of a blowout.
17
4
Share

What kind of paint is used for motorcycle shell spraying?

Motorcycle shell spraying should use special plastic paint for motorcycles. More information about special plastic paint for motorcycles is as follows: 1. Special plastic paint for motorcycles is a plastic paint made of high-performance resin, imported additives, weather-resistant color paste, and glitter powder. 2. Advantages of special plastic paint for motorcycles: strong adhesion, high hardness, and good decorative effect. 3. Uses of special plastic paint for motorcycles: used for painting motorcycle, electric bicycle, and electrical appliance shells. 4. Before using special plastic paint for motorcycles, stir the paint evenly, adjust the construction viscosity to about 11-13 seconds with matching thinner, the air compressor pressure during spraying should be around 2-3kg/m², the construction temperature is best within the range of 12-30℃, and the relative humidity of the construction site should not exceed 70%.
13
0
Share

What Causes Engine Noise in the Chevrolet Cruze?

Reasons for engine noise in the Chevrolet Cruze: 1. Loud engine noise due to carbon buildup in the engine. Regular cleaning of engine carbon deposits is necessary to ensure normal engine operation. 2. It is normal to hear the engine working sound outside the car, but if the engine noise becomes louder inside the car, this may be due to poor sound insulation. The vehicle's sealing strips should be checked for signs of aging. 3. Insufficient coolant can cause the engine noise to increase. The coolant level should be checked, and if the coolant temperature is too low, it can also lead to excessive engine noise. 4. During operation, the engine may experience knocking, which occurs when the remaining air-fuel mixture ignites spontaneously after the spark plug fires. In this state, the engine noise will also increase, and knocking sounds may occur.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.