What is the Pame car?

1 Answers
DanielFitz
07/30/25 5:30am
Pame refers to the Porsche Panamera. Taking the 2021 Porsche Panamera as an example, its body structure is a 5-door, 4-seat hatchback with dimensions of 5049mm in length, 1937mm in width, and 1423mm in height, with a wheelbase of 2950mm and a trunk capacity ranging from 495 to 1334 liters. The 2021 Porsche Panamera features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.9L twin-turbocharged engine, delivering a maximum horsepower of 330PS, a maximum power of 243kW, and a maximum torque of 450Nm, paired with an 8-speed dual-clutch transmission.
Was this review help?
7
1
Share
More Forum Discussions

Which parts are generally damaged in a statically flooded vehicle?

Strictly speaking, it causes damage to all components of the vehicle. Among them, the biggest issue with flooded vehicles is the electrical circuits; water submersion causes significant damage to electronic components. The mixed rainwater is highly corrosive and will affect the future functionality of electrical systems. The computer integrated circuits can oxidize due to soaking, often requiring inspection and replacement; otherwise, the vehicle cannot operate normally. Additionally, the engine, transmission, ABS, airbags, and onboard computers can short-circuit and get damaged after being submerged in water. To fully restore a flooded vehicle and repair it completely without replacing the original components carries relatively high risks. Generally, after restoration, flooded vehicles are highly likely to develop moldy odors or lose certain functionalities. In severe cases, issues like vehicle self-ignition, damage to the engine, transmission, or airbags may occur. Even if all necessary repairs and replacements are done during the repair process—replacing or repairing all water-damaged parts based on specific conditions, thoroughly drying and rust-proofing electrical system connectors and plugs, inspecting all vehicle fluids, replacing interior components, and thorough cleaning—there is still a risk of subsequent damage.
8
5
Share

Where is the coolant drain port on the Trumpchi GS4?

The coolant drain port on the Trumpchi GS8 is located at the bottom of the radiator. Find a plastic knob and unscrew it to drain the coolant. The radiator is positioned at the front of the engine, near the bumper. Precautions for draining coolant: Ensure the engine and radiator are cold. Place a large basin beneath the radiator drain plug, carefully open the plug, and drain the coolant into the basin. Carefully pour the coolant into a sealed container for disposal. It is recommended to use the original Trumpchi GS4 coolant, as coolants from different manufacturers may have different chemical compositions, which could lead to chemical reactions that corrode pipes or cause coolant leaks or blockages. Never open the coolant vent cap when the engine is hot or has just been turned off, to avoid scalding from hot coolant. In extremely cold weather, if you need to enhance the antifreeze capability, you can appropriately increase the proportion of antifreeze additive. However, the concentration of antifreeze should not exceed 65%, as this could reduce its antifreeze capability and weaken the cooling effect. The drain screw is located beneath the radiator fan—take care when draining the coolant.
20
3
Share

What is the appropriate tire pressure for the CT5?

The normal tire pressure range for the CT5 is 2.4-2.5 bar. According to the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: Should not exceed 3.5 bar. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Causes excessive stretching deformation of tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, the tire is more prone to punctures, and impacts can cause internal cracks or blowouts, leading to tire failure.
16
2
Share

Why Do Beginners Frequently Stall at Traffic Lights?

Beginners frequently stall at traffic lights due to reasons such as not pressing the accelerator when starting, releasing the clutch too quickly, prolonged acceleration while pressing the accelerator, and improper coordination between the accelerator and clutch. Not pressing the accelerator when starting: If the accelerator is not pressed when starting, the vehicle may fail to start due to insufficient idle speed. Therefore, it is necessary to press the accelerator appropriately when starting. Releasing the clutch too quickly: When starting, slowly release the clutch pedal with your left foot until the vehicle begins to vibrate, then hold it in that position. Check if the vehicle has a tendency and power to move forward, and do not continue to lift the clutch pedal to prevent stalling. Once the vehicle starts moving forward, release the handbrake completely with your right hand and gently press the accelerator. Prolonged acceleration while pressing the accelerator: During the starting process, avoid prolonged acceleration while the clutch is in a semi-engaged state. As long as the vehicle is propelled by the accelerator, it will not roll backward, and you can release the clutch pedal and press the accelerator to start. Improper coordination between the accelerator and clutch: When starting, press the accelerator first and then the clutch; when braking, press the brake first and then the clutch.
16
2
Share

How Many Hours Are Required for the Subject 3 Simulator?

Subject 3 simulator requires completion of 40 class hours, with each class hour lasting 60 minutes. This includes 24 hours of practical road driving skills training and 12 hours of safety and civilized driving knowledge. Driving schools typically provide designated software. After logging into the corresponding software, students must bind their driving school account and select the relevant subject to watch instructional videos. Before watching, facial recognition verification is required. Once verified, the timer starts. Students must click "Next Page" after each video ends and cannot go back, as returning will reset the progress. Additionally, every 5-10 minutes, students must refresh their identity by facing the camera again. According to the "Motor Vehicle Driver Training Syllabus," students can record a maximum of 4 class hours per day. Any training time exceeding 4 hours will not be counted. During practical road driving skills training, the instructor will insert the student’s card into the machine to record the class hours. After completing the required hours, it generally takes 2-3 days for approval. Once approved, students can proceed to schedule Subject 3. In addition to Subject 3’s hour requirements, Subject 2 requires 2 hours of theoretical training and 32 hours of practical training, totaling 34 hours. Subject 1 requires 12 hours of theoretical training.
3
3
Share

How long can you park in a blue dashed parking space?

Blue dashed parking spaces are time-limited free parking spots with specified parking durations. The free parking time periods are usually indicated on the road surface or signage. Parking spaces can be categorized into the following 3 types based on their colors: Yellow parking spaces: These are exclusive parking spots. Common yellow dedicated parking spaces include those for police use, epidemic prevention support, new energy vehicles, and emergency rescue vehicles. These spaces are marked with relevant text in their signs and markings and are also free parking spots. Other public vehicles should not occupy them. White parking spaces: These are paid parking spots and are the most common type of parking spaces, seen on almost every road. Among them, solid white lines indicate no time restrictions for parking, while dashed white lines indicate time-limited parking. The specific time limits are subject to the markings on the parking space. Green parking spaces: These are found in only a few cities, such as Nanning. They are time-limited free parking spots designed to meet short-term parking needs, such as shopping or running errands.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.