What is the original tire size of the Reiz?

1 Answers
SanMarley
07/30/25 7:14am
The original tire size of the Reiz varies. The 2.5S Fengdu Jinghua Edition and 2.5V Fengdu Jingying Edition of the Reiz use 215/60R16 tire specifications, while other models are equipped with 235/45R18 tires. 215/60R16 indicates that the tire width is 215 millimeters, the aspect ratio is 60, 'R' stands for radial tire, and '16' means it can be mounted on 16-inch rims. The Reiz is the domestic name for the Japanese Toyota MARKX model. The 2.5S Fengdu Jinghua Edition of the Reiz is equipped with a 2.5L naturally aspirated engine, paired with a 6-speed automatic transmission, and features a 4-door, 5-seat sedan body structure. The vehicle's dimensions are 4735mm in length, 1775mm in width, 1450mm in height, with a wheelbase of 2850mm.
Was this review help?
8
4
Share
More Forum Discussions

What is the Engine Oil Viscosity Grade Chart?

The viscosity grade of engine oil is closely related to the vehicle model and local temperature. Below is an introduction to vehicle models and grades: 1. Vehicle Models: Japanese cars primarily use low-viscosity oil, while German cars primarily use high-viscosity oil. 2. Grades: (1) 0W suitable temperature: -35°C (polar regions). (2) 5W suitable temperature: -30°C (northeast and northwest regions). (3) 10W suitable temperature: -25°C (central and southwestern parts of northern China). (4) 15W suitable temperature: -20°C (central and southwestern parts of northern China). (5) 20W suitable temperature: -15°C (areas south of the Yellow River and north of the Yangtze River). (6) 25W suitable temperature: -10°C (subtropical regions).
3
5
Share

How many points are deducted for rolling back on a slope?

In the Subject 2 driving test, rolling back more than 30 cm after stopping will result in a 100-point deduction; rolling back less than 30 cm after stopping will result in a 10-point deduction (previously 20 points). Below are other relevant regulations for the Subject 2 test: 1. Failure to stop at the designated point results in a 100-point deduction; if the vehicle's front bumper does not reach the control line after stopping, a 100-point deduction is applied. 2. Rolling back more than 30 cm after stopping results in a 100-point deduction; rolling back less than 30 cm after stopping results in a 10-point deduction (previously 20 points). 3. Failing to turn on the left turn signal when starting results in a 10-point deduction. 4. Driving over the solid edge line of the road results in a 100-point deduction. 5. If the front bumper does not reach the stop line after stopping, a 10-point deduction is applied (previously 20 points); if the right front wheel is more than 30 cm away from the edge line when stopping, a 10-point deduction is applied (previously 20 points). 6. Taking more than 30 seconds to start results in a 100-point deduction.
3
3
Share

What kind of engine oil should be used for the 2019 Audi A4L?

2019 Audi A4L uses 5W-30 fully synthetic engine oil. Below is the relevant introduction about engine oil: 1. Functions of engine oil: The main functions of engine oil are lubrication, cleaning, and heat dissipation. In fact, many parts of the vehicle use engine oil, but the engine oil that needs to be replaced every 5000 kilometers refers to the engine oil. 2. Differences and replacement intervals of engine oil: Engine oil can be divided into mineral engine oil, semi-synthetic engine oil, and fully synthetic engine oil. If mineral engine oil is used, it generally needs to be replaced every six months or about 5000 kilometers; if semi-synthetic engine oil is used, it should be replaced every 7-8 months or about 7500 kilometers; if fully synthetic engine oil is used, it can be replaced after driving for about one year or 10,000 kilometers.
18
4
Share

What is the difference between PU car wrap and TPU car wrap?

TPU and PU both belong to polyurethane, but TPU is a thermoplastic polyurethane, which outperforms PU in terms of properties and is currently the preferred material recommended by renowned invisible car wrap brands. The details are as follows: 1. PU: PU is polyurethane, widely used in chemical, electronic, textile, and medical fields. However, it is not suitable for application on car paint surfaces because PU material is relatively soft with weak tensile properties, making it unsuitable for paint protection film installation. PU material is soft, has weak tensile strength (unable to wrap curved areas of the car body during installation), cannot repair scratches, and is prone to yellowing. 2. TPU: TPU is a thermoplastic polyurethane elastomer rubber with a wide range of hardness and high elasticity. It can withstand a broad temperature range while maintaining flexibility. The surface of TPU has a coating structure, enabling it to resist stains, corrosion, and scratches, with strong UV resistance. TPU material is technologically advanced, highly elastic, stretchable, stable, and offers excellent stain resistance, corrosion resistance, and UV protection. Additionally, minor scratches can quickly self-repair at room temperature.
20
3
Share

What does the yellow engine dashboard light mean?

Here are the reasons that may cause the yellow engine light to illuminate: 1. Sensor issues: Sensors include those for coolant temperature, crankshaft position, air flow, intake air temperature, oxygen sensors, etc. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, which will trigger the engine warning light. 2. Maintenance problems: Poor engine maintenance is the most common cause of the engine warning light coming on. All vehicles have specific maintenance schedules. If the owner fails to perform regular maintenance combined with poor driving habits, it will increase the operational burden on the engine, ultimately triggering the yellow warning light as an alert.
12
5
Share

Does a motor vehicle need to undergo an on-site inspection in its sixth year?

Motor vehicles are required to undergo an annual on-site inspection in their sixth year. Below are the specific regulations for vehicle annual inspections: 1. Passenger transport vehicles: Must be inspected once a year within the first 5 years; after 5 years, inspections are required every 6 months. 2. Trucks and large or medium-sized non-passenger transport vehicles: Must be inspected once a year within the first 10 years; after 10 years, inspections are required every 6 months. 3. Small and mini non-passenger transport vehicles: Must be inspected once every 2 years within the first 6 years; after 6 years, inspections are required once a year; after 15 years, inspections are required every 6 months. 4. Exemption policy: Family cars with 6 seats or fewer enjoy a 6-year exemption from on-site inspections. The prerequisite for this exemption is that no major traffic accidents occur during this period. If an accident occurs, an on-site inspection is mandatory. Vehicles with 7 seats or more do not qualify for the 6-year exemption and must still undergo inspections every 2 years during the first 6 years.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.