What is the original tire of the Compass?

1 Answers
SanSophia
07/30/25 3:48am
The original tires of the Compass are Continental tires, specifically 25/60R17 and 225/5R18, with CPC2 tread pattern, load index 96, and speed rating H. Below are the relevant details: Precautions for using tires: Regularly correct wheel balance. Excessive wheel imbalance will cause high-frequency vibrations at high speeds, leading to uneven tire wear and compromising driving safety. After tire repair, dynamic balance testing and adjustment should be performed. The single-side dynamic balance test value should be ≤40 grams. Regularly rotate tires. To ensure even tire wear on the same vehicle, tires should be rotated every 5,000 km, and a four-wheel alignment should be performed every 5,000-10,000 km to avoid abnormal excessive wear. Do not install tires of different models or with significant differences in wear on the same axle. Advantages of Continental tires: Continental tires are known for their safety, reliability, and low noise levels. The unique tread design on the tire surface enhances vehicle handling performance. Additionally, Continental tires offer excellent braking performance on both dry and wet surfaces, as well as superior water drainage protection.
Was this review help?
20
2
Share
More Forum Discussions

Where is the OBD port located on the Volkswagen Touran?

Volkswagen Touran's OBD port is located behind the plastic cover under the steering wheel. Relevant introduction about the Volkswagen Touran is as follows: 1. In terms of safety, it retains galvanized steel plates and laser-welded body, and adds xenon headlights. Additionally, the entire series is equipped with rear parking sensors and electrically adjustable heated exterior mirrors. 2. In terms of power, the Touran mainly features two major engine displacements: 1.8T and 2.0L. The 1.8T engine delivers a maximum power of 110 kW and reaches a peak torque of 220 Nm between 2000 and 4600 rpm. The 2.0L engine produces a maximum power of 85 kW and achieves a peak torque of 170 Nm at 4000 rpm. 3. The body lines are smooth and elegant, with the silver roof rack and turn signals integrated into the exterior mirrors being the only decorative elements.
2
3
Share

How to Solve the Abnormal Noise in the Clutch of BYD Song Manual Transmission?

BYD Song manual transmission clutch abnormal noise solutions are as follows: 1. Locate the clutch slave cylinder in the engine compartment, remove the clutch slave cylinder, and take off the sealing rubber sleeve of the release fork. 2. After removing the rubber sleeve, the clutch release fork can be clearly seen. Find the correct position, apply grease, and then restore the rubber sleeve and slave cylinder to their original state. If noise persists, manual greasing can be performed subsequently. BYD Song manual transmission clutch abnormal noise faults and solutions are as follows: 1. Check whether the fasteners at each connection of the clutch operating mechanism are loose. If loose, they should be tightened. 2. Check the free travel of the clutch pedal. If there is no free travel, adjust it as required. 3. Check whether the front bearing or bushing of the transmission first shaft is worn and replace it if necessary.
13
4
Share

How to Add Brake Fluid?

Brake fluid adding method: First, open the car hood, locate the brake fluid reservoir, open the reservoir cap, and add brake fluid. Normally, the water content in brake fluid should be below 1%. Brake fluid is the liquid that transmits force in the braking system and is crucial for driving safety. When the water content in brake fluid reaches 3%, the boiling point of the brake fluid will decrease by 25%. Below is a detailed introduction to the hazards of excessive water content in brake fluid: Since brake fluid has strong water absorption, if the water content is too high, it will lower the boiling point of the brake fluid. Over time, a large number of bubbles will form in the brake lines, which can significantly affect the performance of the braking system. This is because the braking system generates high temperatures during operation, causing the water in the brake fluid to vaporize. This makes the gas easy to compress, leading to dangerous situations such as soft brakes, weak braking, or even brake failure. During routine maintenance, a brake fluid water content tester can be used to determine if the brake fluid needs to be replaced. For new brake fluid, the water content is approximately 0%, and the standard should not exceed 2.5%. If it exceeds 2.5%, the brake fluid should be replaced.
17
4
Share

What car is the logo H?

H is the logo of Honda cars. More information about the Honda logo is as follows: To reflect the youthful, technologically advanced, and innovative design characteristics of Honda, the company uses an "H" logo resembling a three-stringed speaker, symbolizing technological innovation, unity and progress, strong management, a sense of tension, and relaxation. Here is more about Honda: 1. Honda's brands include: Accord, City, Odyssey, CR-V, Fit, Legend, Stream, and S2000. 2. Taking the CR-V as an example: It is a compact SUV produced by Dongfeng Honda, with body dimensions of 4621mm in length, 1855mm in width, and 1679mm in height, a wheelbase of 2661mm, and a 5-door, 5-seat body structure. 3. In terms of power, the Honda CR-V is equipped with a 4-cylinder, 1.5T, 193-horsepower turbocharged engine, paired with a 6-speed manual transmission.
8
0
Share

What is the ground clearance of the Lynk & Co 03 in centimeters?

The ground clearance of the Lynk & Co 03 is approximately 13 centimeters. The clearance is related to the vehicle's load; the heavier the load, the smaller the ground clearance. Vehicles with lower ground clearance have a lower center of gravity but poorer passability. The Lynk & Co 03 is a compact car under the Lynk & Co brand, with dimensions of 4658mm in length, 1840mm in width, and 1459mm in height, and a wheelbase of 2730mm. The Lynk & Co 03 is equipped with three types of engines: a low-power version 1.5-liter turbocharged engine, a high-power version 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine. All engines feature direct fuel injection technology and use aluminum alloy cylinder heads and blocks.
14
2
Share

What is the time setting procedure for Wuling Hongguang?

The time setting procedure for Wuling Hongguang is: 1. First, press and hold the clock button until you hear a beep, then release the button. The time display will start flashing. 2. To set the hour, press and hold the preset button (H side) until the hour reading increments to the desired time. 3. To set the minutes, press the M side, following the same principle as setting the hour. Finally, press the clock button to confirm the set time. More information about Wuling Hongguang: The Wuling Hongguang is equipped with two engines, the PTEC1.2L and PTEC1.4L, designed and manufactured according to General Motors' global powertrain standards. These engines feature DOHC double overhead camshaft and four valves per cylinder design technology. The 1.4L engine delivers an impressive 75 kW of power and 131 Nm of maximum torque, making it outstanding among similar engines.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.