What is the original tire model of the Hyundai Mistra?

How Long Does a Car Need to Sit to Be Considered a Stock Vehicle?

There is no explicit legal definition or standard for how long a car must sit to be considered a stock vehicle. Generally, it ranges from 3 to 6 months, sometimes exceeding 6 months or even a year, and in extreme cases, it can be several years. Regarding the stock duration, you can check the vehicle's production date on the car's nameplate located on the passenger side or in the engine compartment. The time elapsed since the production date is the stock duration. Assess the vehicle's condition based on the length of the stock period. If components like the wipers, engine belts, and tires show no significant signs of aging, it indicates that the storage environment was at least decent. If the stock vehicle appears dirty, thoroughly clean it and carefully inspect the paint for scratches or dents. If all these aspects are in good condition, it suggests the stock vehicle has been reasonably maintained and is essentially no different from a new car. Finally, take it for a test drive to confirm its overall condition.

11

1

Share

Can an Audi still be driven with a water temperature of 130?

Audi should not be driven with a water temperature of 130 degrees. High water temperature may be due to insufficient coolant: Coolant leakage or low coolant levels can cause the engine's water temperature to rise. The coolant level should be checked, and if it is low, it should be topped up to the appropriate level. Then, after a few days, check if the level has dropped significantly. If it has, the source of the leakage must be identified. High water temperature may be due to a faulty radiator fan: When the vehicle is running at high speeds, the heat generated cannot be effectively transferred to the coolant, affecting heat dissipation. This can lead to an increase in coolant temperature, resulting in issues like overheating. High water temperature may be due to a faulty water pump: Water pump failures can include seized bearings or damaged impellers. Seized bearings are relatively rare, but impeller damage, such as cracks or detachment from the pump shaft, can slow down the circulation of coolant, making the engine prone to overheating.

19

5

Share

Does mixing 92 and 95 gasoline have any impact?

Mixing 92 and 95 gasoline does have an impact, which may lead to engine knocking or reduced power, and in severe cases, it can cause fuel system failures in the engine. This is because different grades of gasoline have different octane ratings and anti-knock indices. Long-term mixing can result in engine carbon deposits and fuel line blockages. Generally, mixing various grades and types of gasoline will not cause obvious problems in the short term, but it should not be used this way for an extended period. If a car is recommended to use 95 or higher-grade gasoline, 92 gasoline should not be used. The anti-knock performance of 92 gasoline is weaker than that of 95 gasoline. Adding too much 92 gasoline will reduce the overall anti-knock performance of the fuel in the tank, making knocking more likely to occur. In mild cases, this can lead to delayed ignition and reduced power, while in severe cases, the engine may fail to operate properly.

8

1

Share

What maintenance items are included in the 30,000 km service for the Audi A4L?

Audi A4L requires 5 maintenance items at the 30,000 km service, as detailed below: Maintenance scope: According to Audi's manufacturer warranty policy, at 30,000 km, the air filter, oil filter, cabin air filter, fuel filter, and spark plugs need to be replaced. Maintenance interval: From Audi's official maintenance manual, the specified maintenance interval is every 10,000 km or 1 year. Among them, the oil and oil filter replacement interval is every 10,000 km, the cabin air filter replacement interval is every 30,000 km, the air filter replacement interval is every 40,000 km, the fuel filter (being a built-in structure) does not need replacement within 60,000 km, and the spark plugs, similar to the Mercedes-Benz C-Class, require replacement every 20,000 km.

10

4

Share

What is the license plate prefix for Shaoxing?

Shaoxing license plates start with Zhe D. Shaoxing is located in Zhejiang Province, where the license plate code is Zhe. The license plate codes for other regions in Zhejiang Province are as follows: Zhe A for Hangzhou, Zhe B for Ningbo, Zhe C for Wenzhou, Zhe D for Shaoxing, Zhe E for Huzhou, Zhe F for Jiaxing, Zhe G for Jinhua, and Zhe J to P for the suburbs of Yiwu. The first character of a license plate is a Chinese character representing the provincial-level administrative region where the vehicle is registered, which is the abbreviation of the province, municipality, or autonomous region. The second character is an English letter representing the prefecture-level administrative region where the vehicle is registered, which is the letter code for the prefecture-level city, district, autonomous prefecture, or league. License plates serve as a numbering and information registration system for vehicles, with the primary purpose of identifying the region to which a vehicle belongs and enabling the lookup of the vehicle's owner and registration details based on the license plate number.

19

0

Share

Why did the Mazda auto start-stop suddenly stop working?

Mazda's engine auto start-stop function's normal operation is related to battery charge, air conditioning set temperature, engine water temperature, and whether the seat belt is fastened. When the battery charge is too low, the engine computer will automatically prohibit the start-stop function from activating. Below is relevant information about auto start-stop: 1. The auto start-stop device allows the engine to temporarily shut off when the vehicle comes to a temporary stop or stops at a traffic light. When starting to drive again, there's no need to operate the ignition switch key as the engine will restart automatically. 2. For the auto start-stop to function normally, certain conditions must be met, such as the driver fastening the seat belt, the driver's door being closed, the gear lever of manual transmission vehicles being in neutral position, and the clutch being operated. If these conditions are met, the start-stop device automatically engages the engine. Therefore, a malfunction in the start-stop system isn't necessarily due to the system itself but could be because the conditions aren't met or there's a fault in another system.

16

5

Share

What is the original tire model of the Hyundai Mistra?

How Long Does a Car Need to Sit to Be Considered a Stock Vehicle?

Can an Audi still be driven with a water temperature of 130?

Does mixing 92 and 95 gasoline have any impact?

What maintenance items are included in the 30,000 km service for the Audi A4L?

What is the license plate prefix for Shaoxing?

Why did the Mazda auto start-stop suddenly stop working?

What does a yellow exclamation mark on the car dashboard indicate?

What engine is used in the Maxus G50?

What causes a sudden engine stall in a 2016 Tiida while driving at high speed?

Reasons for High Water Temperature in Besturn X80