What is the original tire model for the Skoda Yeti Outdoor?

1 Answers
PaulLynn
07/29/25 5:28pm
The original tire specification for the Skoda Yeti Outdoor is 225/50R17. The first number 225 represents the tire width of 225MM, 50 indicates the aspect ratio of the tire section is 50%, meaning the section height is 50% of the width, the letter R stands for radial tire, and 17 denotes the rim diameter of 17 inches. The Skoda Yeti Outdoor has a top speed of 190km/h, accelerates from 0 to 100km/h in 9.5 seconds, and has a fuel consumption of 6.3L per 100km. In addition to the model, the tire also carries the following common data: Carcass ply material: Represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire. For practical use, such as standard rim 5.00F.
Was this review help?
7
2
Share
More Forum Discussions

What causes the adaptive headlight malfunction in Audi Q7?

Adaptive headlight malfunctions are typically caused by either a faulty sensor or a malfunctioning small motor in the headlight assembly. It is recommended to check the fault codes for a more accurate diagnosis. Adaptive Front-lighting System (AFS): AFS, also known as the Adaptive Front-lighting System, dynamically adjusts the headlights based on the steering wheel angle, vehicle yaw rate, and driving speed. It continuously adapts to the current steering angle to maintain alignment between the light direction and the vehicle's current driving direction. Cornering Light System: During nighttime cornering, to ensure the driver can clearly see the road conditions in real-time, a cornering light system can be employed. In this system, both the cornering lights and the main headlights remain fixed in position, but their activation timing is controlled in real-time to achieve the cornering illumination effect.
3
0
Share

What is the etiquette for sedan seating arrangements?

The etiquette for sedan seating arrangements includes: 1. When the driver is driving: the right rear seat is the most prestigious, followed by the left rear seat, then the middle rear seat, and the front passenger seat is the least prestigious. 2. When the owner is driving: the front passenger seat is the most prestigious, followed by the right rear seat, then the left rear seat; the middle rear seat is the least prestigious. 3. When the owner and his/her spouse are driving: the owner couple sits in the front seats, and the guest couple sits in the rear seats. The gentleman should serve his wife by opening the car door for her to enter first, then enter himself. 4. When giving a ride to a friend couple: the invited friend sits in the front passenger seat, the friend's wife sits in the rear seat, or both the friend and his wife can sit in the rear seats.
12
4
Share

What gear should be used for uphill driving in a Corolla automatic transmission?

You can use the M gear. Reason: Generally, the M gear is used more frequently, and using a lower gear for uphill driving is more reliable; the M gear is a low-speed gear, and using first or second gear is more suitable for uphill driving. Extension: The Corolla automatic transmission has five gears, which are P (Parking gear), R (Reverse gear), N (Neutral gear), D (Drive gear), and M (Manual gear). This car uses a stepped gear arrangement, also known as a serpentine gear arrangement, which is a very common design for automatic transmission gears, often seen in Japanese cars. Its advantages and disadvantages are the opposite of the straight-line arrangement: the advantage is that it is less likely to shift into the wrong gear, while the disadvantage is that the operation is not as smooth and direct as the straight-line arrangement.
14
0
Share

What kind of water should be added to the windshield washer reservoir?

Windshield washer reservoir should be filled with automotive-specific windshield washer fluid. The following are the functions of automotive windshield washer fluid: 1. Cleaning performance. The surfactants in automotive windshield washer fluid usually have functions such as wetting, permeation, and solubilization, thereby achieving the effect of cleaning and removing dirt. 2. Anti-freezing performance. The presence of alcohol and ethylene glycol can lower the freezing point of the liquid, thus providing an anti-freezing effect. 3. Anti-fog performance. A single-molecule protective layer will form on the glass surface, ensuring the windshield remains clear and transparent. The following are the steps to add water to the windshield washer reservoir: 1. Open the car's front hood and locate the blue cap behind the left headlight. 2. Find the white tube connected to a white jug-shaped object, with a fan-shaped symbol on the cap indicating the windshield washer. 3. Open the cap and add water directly. If there is not much foam, you can mix in a little dishwashing detergent.
8
3
Share

Can the Mazda 3 Axela Add 4 Liters of Engine Oil?

2.0 engine oil adding 5 liters is sufficient, the Mazda 3 Axela can add 4 liters of engine oil. Background of engine oil development: In the mid-19th century, people did not yet recognize the importance of gasoline, and kerosene for lamps was widely used at that time. Petroleum refining then relied on simple distillation processes to separate components with different boiling points from petroleum. Kerosene components have a higher boiling point and were safer to use in lamps, becoming the main product of crude oil refining, while gasoline and other components were often burned as fuel. Carcinogens in engine oil: On October 27, 2017, the World Health Organization's International Agency for Research on Cancer (IARC) released a preliminary reference list of carcinogens, with engine exhaust and gasoline listed in the Group 2B carcinogens list.
20
5
Share

Reasons Why Tesla Phone Key Fails to Detect

No need to point the key at the Model-S, but it must be within the detection range (this depends on the strength of the key battery). The specific details are as follows: 1. If the Model-S cannot detect the key, the touchscreen will display a message indicating that the key is out of range. Place the key in a position where the Model-S can effectively detect it. Radio frequency devices with similar frequencies near the 12V power socket may interfere with the key. 2. If this happens, move the key at least 30cm away from other electronic devices (such as mobile phones, laptops, etc.). If the key still doesn't work, the battery may need to be replaced. It's important to note that the Tesla Model-3 features a keyless design, and the provided card key can also unlock the car doors.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.