What is the original tire model for the Audi Q7?

1 Answers
VonKing
07/30/25 1:23am
Audi Q7 tire model is 285/40R21. The first number 285 represents the tire width of 285MM, 40 indicates the aspect ratio of the tire section is 40%, meaning the section height is 40% of the width, the letter R stands for radial tire, and 21 represents the rim diameter of 21 inches. The Audi Q7 has a top speed of 220km/h, accelerates from 0-100km/h in 5.6 seconds, and has a fuel consumption of 3.8L per 100km. In addition to the model, the tire also bears the following common data: Tire cord material: Indicated by Chinese Pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as "Standard rim 5.00F".
Was this review help?
16
5
Share
More Forum Discussions

Will the 16-inch wheels interfere with the rear drum brakes on the new Santana?

The 16-inch wheels on the new Santana do not interfere with the rear drum brakes. Below is the relevant information for the 2021 Santana model: 1. Model: The new Santana and the new Jetta share the same platform, so their body dimensions and wheelbase are highly similar, with some parts even completely overlapping. 2. Body dimensions: The 2021 Santana has a body length of 4282mm, a wheelbase of 2603mm, and a width of 1706mm. The new Jetta is 14mm longer than the new Santana, which is the biggest difference in body dimensions between the two models, though this difference is hardly noticeable from the side view.
19
0
Share

Can You Drive with a Faulty Camshaft Position Sensor?

You cannot drive with a faulty camshaft position sensor. Symptoms of a faulty sensor include: 1. Difficulty accelerating; 2. Ignition failure and unstable idling; 3. Persistent engine warning light; 4. Sudden engine stall during warm operation. The camshaft position sensor is a sensing device, also known as a synchronization signal sensor. Since it can identify when a cylinder's piston is about to reach top dead center, it is also referred to as a cylinder identification sensor. The working principle of the camshaft position sensor is: 1. Collecting the position signal of the camshaft and transmitting it to the ECU; 2. The ECU identifies the top dead center of cylinder 1's compression stroke to perform sequential fuel injection control, ignition timing control, and knock control.
4
4
Share

How to Adjust the Rearview Mirror of Baojun 730?

The adjustment method for the Baojun 730 rearview mirror is as follows: 1. Turn the electric adjustment knob on the driver's side door panel handle to the left or right to select the side of the rearview mirror to be adjusted; 2. Move the adjustment lever to adjust the angle. The Baojun 730 is a 5-door, 7-seat MPV with body dimensions of 4780mm in length, 1780mm in width, and 1740mm in height, with a wheelbase of 2750mm. The Baojun 730 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 108kW and a maximum torque of 250Nm. It features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
16
3
Share

What Causes the Abnormal Noise from the Chassis After the Car Stops?

The reasons for abnormal noise from the chassis after the car stops are: 1. Corrosion or aging of the stabilizer bar bushings; 2. Damaged brake pads; 3. Malfunction in the connecting parts between the suspension and shock absorber; 4. Abnormal noise from the wheel bearings; 5. Deformation of the shock absorber spring; 6. Aging or wear of the shock absorber pressure bearings. Daily maintenance methods for the car chassis include: 1. Proper adjustment of the front wheel toe-in; 2. Good lubrication and proper adjustment of the wheel hub bearings; 3. Pay attention to changes in the front and rear axles and the frame; 4. Check for any damage to the leaf springs; 5. Proper adjustment of the brake clearance; 6. Monitor the working condition of the clutch.
18
2
Share

How to One-Touch Power Window Up for Honda Civic?

Honda Civic one-touch power window up method is: 1. Press and hold the lock button for 5 seconds without releasing to make all windows roll up simultaneously; 2. Release the button when you hear a click sound. Taking the 2019 Civic as an example, its body dimensions are: length 4658mm, width 1800mm, height 1416mm, wheelbase 2700mm, minimum ground clearance 105mm, and fuel tank capacity 47L. The 2019 Civic is equipped with a 1.0T turbocharged engine, with maximum power of 92kW and maximum torque of 173Nm, matched with a CVT continuously variable transmission. It uses MacPherson strut front suspension and multi-link independent rear suspension.
3
1
Share

What brand of tires does the Mistra use?

The Mistra uses Hankook tires, with the tire model being 205/60R/16. The Mistra is a 4-door, 5-seater sedan launched by Beijing Hyundai. Taking the 2021 Mistra Flagship Edition as an example, its body dimensions are: length 4780 mm, width 1815 mm, height 1460 mm, with a wheelbase of 2770 mm and a fuel tank capacity of 52 liters. The 2021 Mistra Flagship Edition is equipped with a 1.5T inline 4-cylinder turbocharged engine, with a maximum power of 125 kW at 5500 rpm, and a maximum torque of 253 N·m between 1500 to 4000 rpm.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.