What is the original tire model for the 2016 Hyundai Mistra?

1 Answers
ArianaLynn
07/29/25 7:16pm
The original tire model for the 2016 Hyundai Mistra is 225/45R18. The first number 225 indicates the tire width is 225MM, 45 represents the aspect ratio of the tire section is 45%, meaning the section height is 45% of the width. The letter R stands for radial tire, and 18 indicates the rim diameter is 18 inches. The 2016 Hyundai Mistra has a top speed of 202km/h and a fuel consumption of 5.3L per 100km. In addition to the model, the tire also carries the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed rating of the tire from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as 'Standard Rim 5.00F'.
Was this review help?
2
0
Share
More Forum Discussions

What are the tire specifications for the 7th-generation Accord?

The 7th-generation Accord has two tire size specifications: 205/60R16 and 205/65R15. In 205/60R16, the first number 205 represents the tire width of 205MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, and 16 represents the rim diameter of 16 inches. The letter "R" in the middle stands for radial tire. In 205/65R15, the first number 205 represents the tire width of 205MM, 65 indicates the aspect ratio of the tire section is 65%, meaning the section height is 65% of the width, and 15 represents the rim diameter of 15 inches. The letter "R" in the middle stands for radial tire. The tire brand for the 7th-generation Accord is Dunlop. The tread patterns on the left and right sides of the tire are different, and the spare tire specification is full-size. If you want to replace the tires yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame. Raise the jack until it supports the car. The jack should be positioned under the vehicle. Check and ensure the jack is at a right angle to the ground. Remove the hub cover and loosen the nuts counterclockwise. Do not fully loosen the nuts; just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn instead of the tire. Turn the nuts counterclockwise until they are loose. Repeat this step for all lug nuts and then remove them completely. Place the new tire on the wheel hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and tighten them by hand until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, the tire also displays the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters from A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Indicates the rim specification compatible with the tire, facilitating practical use, such as "Standard rim 5.00F".
11
2
Share

What is the tire model of the Peugeot 4008?

The tire specifications and sizes for the Peugeot 4008 are as follows: Peugeot 4008-2022 model 400THP Chuangxiang Edition-225/55R18, Peugeot 4008-2021 model 360THP Fengrui Edition-215/65R17; Peugeot 4008-2021 model 400THP Zhizhen GT Edition-235/50R19. The first numbers 215, 235, and 225 represent the tire width in millimeters (215MM, 235MM, 225MM). The numbers 65, 55, and 50 indicate the aspect ratio of the tire's cross-section (65%, 55%, 50%), meaning the height of the cross-section is 65%, 55%, and 50% of the width, respectively. The numbers 18, 17, and 19 represent the rim diameter in inches (18, 17, 19 inches). The letter "R" in the middle stands for radial tire. The Peugeot 4008 is equipped with Michelin e.Primacy tires, and the spare tire is a non-full-size one. Tire maintenance methods: Regularly check tire pressure. Tire pressure is a crucial factor affecting tire lifespan; it should not be too high or too low. Always inflate according to the vehicle's indicated tire pressure. In summer, try to keep the tire pressure slightly lower; in winter, ensure the tire pressure is slightly higher than in summer due to thermal expansion and contraction. This ensures a comfortable and safe driving experience. Frequently inspect tire wear. Some vehicles may experience uneven tire wear ("tire cupping"), so it's essential to check the tires regularly, especially the inner side, for abnormal wear. Pay attention to whether the tread depth is consistent on both sides. Promptly remove small stones and other debris from the tires. Foreign objects in the tire treads can pose potential hazards, as they may fly out while driving. Therefore, keep the tires as clean as possible. Besides the model, tires also display the following common data: Tire cord material: Represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings ranging from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specification: Shows the rim size compatible with the tire for practical use, such as "Standard Rim 5.00F".
10
5
Share

What types of insurance should I buy for my car?

When purchasing car insurance, the following types are mainly considered: 1. Compulsory Traffic Insurance: This is a mandatory insurance for both new and used cars. 2. Commercial Insurance: Depending on the condition of the car, commercial insurance typically includes Third-Party Liability Insurance, Vehicle Damage Insurance, Motor Vehicle Insurance (commonly referred to as Car Insurance), and No-Deductible Special Coverage. Among these, Motor Vehicle Insurance is a type of commercial insurance that covers liability for personal injuries or property damage caused by natural disasters or accidents involving the vehicle.
2
2
Share

How Long Does Wheel Rim Repair Take?

Aluminum alloy wheel rim scratch repair typically takes about 1 day. Whether a scratched wheel rim can be repaired depends on the following factors: 1. Rim material: Chrome-plated or polished rims cannot be repaired because their surfaces are too glossy to restore. 2. Severity of scratches: If the scratches haven't exposed the primer, they only affect appearance without causing other damage, and may not require repair. 3. Exposed primer: If the scratches have exposed the primer, repair is necessary. Unrepaired primer exposure may lead to wrinkling and expansion of the damaged area over time, along with rust and corrosion.
2
4
Share

Should I swipe my ID card or fasten the seat belt first for the Subject 2 driving test?

First, swipe your ID card for facial recognition, adjust the seat, and then fasten the seat belt to begin the test. Here are some precautions for the Subject 2 driving test: 1. Before the test: Bring your original ID card, avoid wearing slippers, high heels, or colored sunglasses. 2. While waiting for the test: Carefully recall the operational details of the test items, visualize the technical process in your mind, and ignore others' discussions to avoid disturbing your mood. 3. After getting in the car: Fasten the seat belt, adjust the seat and rearview mirrors, and set up the test car to the configuration you're most familiar with.
12
4
Share

Why is the idle speed high in winter?

In winter, the high idle speed occurs because the engine's normal operating water temperature is around 90 degrees Celsius. In extremely low temperatures, after the engine starts, the water temperature sensor sends a signal to the ECU, prompting the engine to increase fuel injection and air intake, thereby raising the engine speed to quickly reach the normal operating temperature. As the engine temperature gradually rises, the idle speed will also gradually decrease to normal levels. The increase in idle speed after a cold start is a normal phenomenon, serving as a protective measure for the engine by the car, and also aimed at improving combustion efficiency and meeting emission standards. The car engine is the device that provides power to the vehicle, acting as the heart of the car, and determines the vehicle's power, fuel economy, stability, and environmental friendliness.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.