What is the original tire model for the 10th generation Accord?

How to Deal with Continuously Increasing Car Fuel Consumption?

If your car's fuel consumption keeps increasing, you should promptly check the tire pressure and wear level, clean carbon deposits, and inspect the oxygen sensor. Here are specific methods to reduce fuel consumption: 1. Lightly press the accelerator: The initial low-speed acceleration phase is the peak fuel consumption period, so gently pressing the accelerator during startup can prevent excessively high RPM and effectively reduce fuel consumption. 2. Avoid high RPM: Try to avoid unnecessary high RPM, as fluctuating engine speeds can significantly increase fuel consumption. 3. Regular maintenance: Change the engine oil and clean carbon deposits periodically. 4. Avoid sudden braking: Anticipate road conditions in advance to avoid sudden braking, which not only enhances driving safety but also saves fuel. For example, gradually slowing down before traffic lights and utilizing inertia to coast.

18

0

Share

Is there still oil left in the hose after refueling at a gas station?

The fuel nozzle at a gas station delivers oil through a fuel pump. After each refueling, the one-way valve inside the nozzle closes, preventing the fuel from flowing back into the dispenser. No matter how much you shake the nozzle, the oil in the hose will not leak out. Additionally, due to the fuel pump, the hose is always filled with fuel. Even if you just finished refueling, the next vehicle can immediately use the nozzle without any waiting time. Therefore, drivers don't need to worry about the gas station withholding oil from the hose—the exact amount you paid for has been fully added to your fuel tank.

2

3

Share

What is the correct method for adding coolant?

Correct steps for adding antifreeze to a car: 1. Add antifreeze from the radiator filler port until the radiator is full. Unscrew the reservoir cap, add antifreeze up to the "Max" mark, being careful not to exceed it. 2. Replace and tighten both the radiator cap and the reservoir cap. 3. Start the engine and let it idle for 2-3 minutes, then open the radiator cap. As some air is expelled from the cooling system, the antifreeze level will drop. At this point, add more antifreeze until it reaches the "Max" mark again. 4. Securely close the radiator cap.

15

3

Share

What is the fuel tank capacity of the Great Wall M4?

The Great Wall M4 has a fuel tank capacity of 45 liters. The vehicle dimensions are 3995mm in length, 1728mm in width, and 1617mm in height, with a wheelbase of 2383mm. It is a 5-door, 5-seater SUV with a 6-speed AMT transmission and a top speed of 171 km/h. The engine is a 1.5L L4 naturally aspirated unit, delivering a maximum horsepower of 106ps and a maximum torque of 138nm. The car features front-wheel drive, with a MacPherson independent front suspension and a compound torsion beam rear suspension. The steering assistance is mechanical hydraulic, and the body structure is of a unibody type.

17

4

Share

What are the components of a high-pressure fuel system?

The components of a high-pressure fuel system include: high-pressure fuel pump, pressure regulator valve, high-pressure fuel rail, high-pressure fuel pressure sensor, fuel injector, and high-pressure fuel lines. The high-pressure fuel pump is driven by a square cam at the intake camshaft end, and the pressure relief valve is integrated inside the high-pressure fuel pump, eliminating the need for a return line from the fuel rail to the low-pressure side. The control principle of the high-pressure fuel pump has changed. During the initial operation of the high-pressure pump, the pressure relief valve remains closed, allowing fuel pressure to directly reach the fuel rail. This design benefits cold starts by enabling faster fuel pressure buildup. The fuel pressure limiter valve, integrated within the high-pressure fuel pump, provides overpressure protection for the system in cases of fuel thermal expansion or malfunctions.

19

2

Share

What Causes Gear Shift Hesitation in the Transmission?

Transmission shift hesitation is caused by: the need to replace transmission oil, which is essentially the gear oil inside the transmission and requires regular replacement. Failure to replace it promptly can significantly reduce its lubrication effectiveness, leading to a substantial increase in shifting resistance and making gear changes feel rough. Transmission oil is essential for maintaining the cleanliness of the transmission system, ensuring it operates normally and extending the lifespan of the vehicle's drivetrain components. Depending on the transmission type, transmission oil can be categorized into manual transmission oil and automatic transmission oil. Automatic transmission oil, also known as ATF (Automatic Transmission Fluid), serves both as a hydraulic fluid and a lubricant, functioning in different parts of the vehicle.

5

4

Share

What is the original tire model for the 10th generation Accord?

How to Deal with Continuously Increasing Car Fuel Consumption?

Is there still oil left in the hose after refueling at a gas station?

What is the correct method for adding coolant?

What is the fuel tank capacity of the Great Wall M4?

What are the components of a high-pressure fuel system?

What Causes Gear Shift Hesitation in the Transmission?

Cause of Left Front Window Malfunction in Excelle?

Why can't the natural gas valve be opened after being closed?

How to Connect Bluetooth in Mercedes-Benz C-Class?

What does it mean when the engine authentication fails and the car won't start?