What is the original tire brand of Haval H5?

1 Answers
IslaMarie
07/30/25 8:58am
Haval H5's original tire brand is Hankook. The functions of tires are: 1. To transmit driving force, braking force, and steering force to achieve vehicle operation; 2. To support vehicle loads; 3. To reduce and absorb vibrations and impact forces during driving, avoiding severe vibrations that may damage vehicle components. Taking the 2018 Haval H5 as an example, it belongs to the compact SUV category, with a front track of 1522mm, rear track of 1530mm, a fuel tank capacity of 70 liters, and a curb weight of 1740kg. The 2018 Haval H5 features a double-wishbone independent front suspension and a five-link non-independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 190PS, maximum power of 140kW, and maximum torque of 250Nm, paired with a 6-speed manual transmission.
Was this review help?
4
4
Share
More Forum Discussions

How to Operate the Automatic High/Low Beam on Camry?

Switch is integrated on the light control stalk, which is the outermost knob on the left stalk of the steering wheel. You can turn it to the AUTO button, which is the automatic headlight mode. After switching to this position, the turning on and off of the headlights can be left to the car. The car is also equipped with an automatic high beam module. This function allows the car to automatically turn the high beams on and off while driving with the headlights on. It should be noted that some friends may find that the headlights are still on even in broad daylight, in which case the sensor needs to be checked to see if it is blocked.
10
2
Share

What type of fire extinguisher should be used for an engine fire?

For engine fires, use a carbon dioxide fire extinguisher. Reasons for using a carbon dioxide fire extinguisher: It will not cause secondary short-circuit damage to electrical components and also prevents safety accidents caused by electrical leakage. Precautions for using a carbon dioxide fire extinguisher: When using it, first pull out the safety pin before pressing the handle. Aim the nozzle at the base of the flames when discharging. Avoid direct contact between the spray tube or hose and the skin to prevent injury. When using outdoors, discharge from the upwind direction. When using in confined indoor spaces, the operator should leave quickly after extinguishing the fire to avoid suffocation.
12
4
Share

How to Shift Gears Without Pressing the Clutch?

Methods for shifting gears without using the clutch: 1. Before shifting, try to increase the engine speed to build up momentum, then quickly release the accelerator pedal while shifting the gear to neutral. Quickly move the gear lever to the next higher gear, applying a slight force to push the lever, and wait for the engine speed to drop. When the engine speed matches the transmission speed, the gear lever will smoothly engage into the higher gear as if being pulled in. 2. For upshifting: Release the accelerator—shift to neutral—pause for the engine speed to drop—engage the higher gear. 3. For downshifting: Release the accelerator—shift to neutral—press the accelerator to increase engine speed—engage the lower gear.
17
5
Share

How to Replace the Seat Belt on a Buick Excelle?

Locate the wiring under the car seat, find the sensor wire of the seat belt buckle, and remove it. Take off the seat cushion and remove the airbag. Find the seat cushion sensor inside the seat cushion and remove it. Install the new seat belt buckle onto the seat. Thread the bolt through the hole and insert it. Install the weight sensor onto the car seat. Attach the new retractor and tighten it with a wrench. Insert the seat belt completely and check if it locks properly. Reinstall the seat cushion onto the car seat and arrange the wiring at the bottom of the seat. Test the newly installed seat belt by pulling the strap to see if it retracts properly.
13
1
Share

How to Overcome Foot Trembling During the Driving Test?

In fact, it's not just one person who gets nervous; everyone feels tense during the test. So don't be afraid—moderate nervousness can help you stay focused. The test site is actually quite similar to the training area. Finding that sense of familiarity can help ease tension. The more you worry about something, the more likely it is to happen. During the test, just focus on the task at hand and avoid overthinking. Move your hands and feet freely in place or take small steps within a limited area. Letting your body move slightly can shift your attention to simpler things.
6
5
Share

How to reset the maintenance light on Kaiyi C3?

Turn off the ignition switch to cut off the power supply to the car; press and hold the reset button on the instrument panel, which is the adjustment lever on the combination meter. Turn the switch to the ON position. The function of the maintenance light is to record the mileage of important components, similar to a timer in a sprint race. After the ignition switch is turned on for about 2 seconds, release the reset button. The disappearance of the wrench symbol indicates that the maintenance light has been successfully reset. Although the maintenance light does not affect the performance of the car, it is essential to reset it after maintenance.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.