What is the original spark plug model for GAC Trumpchi GS4?

2 Answers
McMason
07/25/25 2:17am
Trumpchi GS4 uses NGK brand iridium spark plugs with the model number 454523. The benefits of replacing spark plugs include improved vehicle performance. Spark plugs are consumable parts that require regular replacement. If spark plugs are damaged, they can directly cause issues such as leakage in the vehicle's ignition system, increased fuel consumption, reduced power, and most notably, difficulty in starting the engine, affecting normal vehicle use. Severe spark plug erosion, such as scarring at the top, damage, or melted electrodes, indicates that the spark plug is damaged and should be replaced. Spark plug location: Spark plugs are installed on the side or top of the engine. In earlier models, spark plugs were connected to the distributor via ignition cables. Over the past decade, most car engines have switched to direct connection between the ignition coil and the spark plug. Spark plug replacement interval: Under normal maintenance conditions, spark plugs should be replaced every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's recommended to follow the user manual. Generally, platinum spark plugs should be replaced every 40,000 kilometers, ordinary nickel alloy spark plugs every 20,000 kilometers, and iridium spark plugs every 60,000 to 80,000 kilometers.
Was this review help?
15
0
Share
HarrisonMarie
08/10/25 4:31pm
I've been researching cars for many years and often help friends with car repairs. The original spark plugs for the GAC Trumpchi GS4 are typically the NGK LFR5AIX-Iridium model, suitable for the 1.5T engine. This model features a unique design with iridium electrodes that are heat-resistant and provide strong ignition, improving fuel efficiency and power response. The recommended replacement interval is between 30,000 to 60,000 kilometers, depending on driving habits. I've encountered many car owners who experienced issues after switching to non-original spark plugs, such as engine shaking or a significant increase in fuel consumption, so sticking to original parts is crucial. When replacing them yourself, pay attention to the spark plug gap and torque—specialized tools are very helpful. Regularly check the spark plug color—white indicates overheating, while black suggests incomplete combustion. Replacing them in time can prevent major engine overhauls. Always choose genuine parts, such as purchasing through official channels, and don't try to save small amounts of money at the risk of bigger losses.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

Is the Bora a China-specific model?

The Bora is not a China-specific model. The current generation Bora is actually developed on the same platform as the Lavida. As early as ten years ago, the name 'Bora' was equivalent to today's Sagitar, making it a global model. Relevant details are as follows: 1. China-specific models refer to vehicles developed by multinational automakers specifically for Chinese consumers after understanding their unique needs, sold exclusively in China without equivalent models abroad. 2. They can be broadly categorized into two types: China-specific models developed by joint venture brands or multinational corporations for Chinese consumers, and various L versions of existing mature models that are lengthened, enlarged, or feature upgraded configurations as China-specific variants.
5
1
Share

What is the exact sound of engine piston slap?

The sound of engine piston slap is a crisp and rhythmic metallic knocking noise, and this sound varies with temperature changes. Piston slap is an abnormal phenomenon, and when this issue occurs, it is essential to immediately inspect the cause and then proceed with repairs. The following are the main reasons for piston slap faults: 1. Improper repair or assembly leading to excessive clearance between the piston and cylinder, or severe cylinder wear causing excessive clearance. At low temperatures, the piston clearance is larger, resulting in severe piston slap noise. As the engine temperature rises, the piston expands, reducing the clearance and thereby lessening or eliminating the piston slap noise. 2. Incorrect piston installation direction or piston deformation, which disrupts the normal clearance between the piston and cylinder, causing piston slap noise. 3. Poor lubrication conditions, low oil pressure, or excessively low oil viscosity, leading to inadequate splash lubrication on the cylinder walls. This prevents the formation of a normal lubricating oil film between the piston and cylinder walls, causing direct contact and resulting in piston slap. 4. Bent or twisted connecting rods, or improper assembly of the piston-connecting rod group, causing the piston to tilt excessively in the cylinder beyond the permissible range. This not only worsens sealing and lubrication conditions but also leads to abnormal cylinder wear, resulting in knocking sounds between the piston and cylinder walls. 5. Blocked oil passages, preventing normal pressure lubrication; excessively tight fitting of connecting rod bearings or piston pins, causing the piston to collide with the cylinder walls during movement and produce knocking sounds.
3
5
Share

Is Min K a government license plate?

Min K is a government license plate. Min K is used for provincial-level systems and the Pingtan Comprehensive Experimental Zone. Additional information: 1. Scope of use for "Min K" license plates: Provincial-level and central-level units stationed in Fuzhou (including administrative units, public institutions, and enterprises). 2. "Min K" license plates are managed and issued by the Vehicle Management Office of the Traffic Police Corps of the Fujian Provincial Public Security Department. 3. License plates for various cities in Fujian Province are as follows: Min A - Fuzhou (excluding Pingtan County), Min B - Putian, Min C - Quanzhou, Min D - Xiamen, Min E - Zhangzhou, Min F - Longyan, Min G - Sanming, Min H - Nanping, Min J - Ningde, Min K - Provincial-level systems, Pingtan Comprehensive Experimental Zone.
11
2
Share

What is the testing method for automotive relays?

Use a multimeter to test the condition of the relay. The following are the steps to test a relay with a multimeter: 1. Use the ohmmeter function of the multimeter to first measure the relay coil. The coil should have a very small resistance value. If the resistance is infinite, it indicates an open circuit in the coil, meaning the relay is damaged; 2. Then measure the normally closed (NC) and normally open (NO) contacts of the relay. The resistance values should be: nearly zero for the NC contact and infinite for the NO contact; 3. Finally, check if the relay can be manually activated by pushing the movable part. If it can, keep the relay in the activated state and measure again to see if the NC and NO contacts have switched states.
20
5
Share

What are the symptoms of a faulty solenoid valve?

The symptoms of a faulty solenoid valve include inability to intake water or continuous water intake; failure to display water temperature and water level; inability to operate or shut off after being powered on, among other issues. Since the solenoid valve is a component used to control water intake in machinery, its malfunction may result in water supply failure or continuous water flow. It should be replaced promptly to avoid affecting daily life. Below are precautions for using solenoid valves: 1. Regularly check the sealing of the solenoid valve, as damage or aging can affect the seal. Once the seal weakens, it will impact the normal operation of the machinery. 2. When selecting equipment, consider the working environment. If it is in a place with significant chemical reactions, corrosion-resistant equipment should be prioritized. This is because different equipment has its own characteristics and should not be mixed, otherwise it will affect the service life. 3. Keep the pipeline clean and free of hard objects and other impurities, as they can cause the machine to jam and fail to operate. Installing a filter in front of the machine can make this easier.
5
4
Share

Can a Truck Run Without Urea Solution?

Trucks can continue to operate without urea solution, but it should be replenished as soon as possible. Prolonged absence of urea circulation can lead to crystallization, clogging, or high-temperature damage in the urea pump nozzle, pipelines, and the urea pump itself, which are expensive to repair. Without urea, the emission warning light will illuminate, torque will be limited, resulting in insufficient power and poor performance. Additionally, trucks without urea will fail annual inspections and may face penalties. Below is an introduction to the role of urea in heavy-duty vehicles: 1. Vehicles with diesel engines require urea, which has a catalytic function. When encountering nitrogen oxides, it triggers a chemical reaction, converting them into nitrogen and water before emission. 2. With increasingly stringent vehicle emission standards, automotive urea has become the fourth major automotive consumable after fuel, lubricants, and tires. 3. Qualified urea solution is synthesized from 32.5% ultra-pure urea and pure water. Through selective catalytic reduction with nitrogen oxides, it converts them into nitrogen, oxygen, and water, thereby reducing nitrogen oxide emissions. 4. Automotive urea plays a crucial role in vehicle power and fuel consumption. Failure to use diesel exhaust fluid or the use of impure or substandard urea solutions can cause the vehicle's engine to automatically reduce speed.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.