What is the original size of the Audi Q5L wiper blades?

2 Answers
LeZoe
07/24/25 2:22pm
Audi Q5 wiper blades are 600mm for the driver's side and 500mm for the passenger side. Below are some maintenance tips for wiper blades: 1. Lift the wipers when parked in direct sunlight: When a vehicle is parked under the scorching sun, the windshield temperature can rise to 50-60°C. The rubber blades pressed against the windshield will age faster due to the high temperature. When parking outdoors, lift the wipers to prevent the rubber blades from touching the hot glass, thereby extending their lifespan. 2. Add wiper fluid: Mix wiper fluid with water in the correct proportion and add it to the wiper fluid reservoir. 3. Use dedicated automotive cleaners: Common household detergents or soaps often contain ammonia or chlorine, which can accelerate rubber aging. Use car-specific cleaning agents to protect your car's wipers and other rubber components.
Was this review help?
8
5
Share
DeAllie
08/11/25 8:10am
I remember my Audi Q5L has been in use for several years, and the original wiper sizes are 26 inches for the driver side and 18 inches for the passenger side. This size design is quite precise, ensuring complete coverage of the entire windshield. When replacing wipers, the sizes must match; otherwise, there will be blind spots, making it hard to see clearly while driving in the rain. Last year, I tried replacing them myself and bought the wrong size by mistake. As a result, the wipers jumped around and left water streaks, almost causing an accident on the highway. Since then, I only buy original or OEM replacements—though more expensive, they are durable and safer. I recommend checking the wiper blades at least every six months. If they make loud noises or leave uneven streaks while wiping, it’s time to replace them—don’t wait until they fail in the rain and disrupt your trip. Also, cleaning the wiper blades is crucial. I often use a damp cloth to wipe off dirt, which helps extend their lifespan.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

How to reset the maintenance light on the Geely Haoyue?

To reset the vehicle maintenance light, first start the vehicle to illuminate the instrument panel. After starting the vehicle, the maintenance indicator will appear on the instrument panel. Turn off the ignition switch; with the engine off, press and hold the short-distance counter reset button located below the tachometer. Turn the ignition switch to the ON position, then release the short-distance counter reset button. Pull out the minute button on the clock and turn it to the right. Turn off the engine to reset the reminder message. Turn the ignition switch to the ON position, and the "SERVICE" indicator will disappear.
10
1
Share

What are the components of the engine electronic control system?

The components of the engine electronic control system include the electronic spark advance system (ESA), electronic fuel injection system (EFI), exhaust gas recirculation (EGR), idle speed control system (ISC), and intake control system, among others. Generally, control systems other than the electronic fuel injection system and electronic ignition system are collectively referred to as auxiliary control systems. The engine electronic control system, abbreviated as the electronic control system, controls engine ignition, fuel injection, air-fuel ratio, and exhaust emissions to ensure the engine operates under optimal conditions, achieving good vehicle performance, energy savings, and reduced exhaust emissions. The electronic fuel injection system includes fuel injection quantity control and injection timing control. The primary function of the exhaust gas recirculation system (EGR) is to reduce nitrogen oxide (NOx) emissions. The idle speed control (ISC) system adjusts the engine's air intake via the idle control valve based on factors like engine coolant temperature, whether the air conditioning compressor is operating, and whether the transmission is engaged, ensuring the engine always runs at the optimal idle speed. The intake control system manages the engine's air intake according to changes in engine speed and load to improve the engine's volumetric efficiency, thereby enhancing engine performance.
15
2
Share

How to Set the Time on X-Trail?

First, press the vehicle's one-touch start button to start the vehicle; otherwise, adjustments cannot be made. The dashboard will display vehicle information. Then, use the multifunction steering wheel to switch to the time setting interface. After pressing "Clock Settings," the center console will display the options. Press the RES or SET buttons on the multifunction steering wheel to adjust the dashboard display. Repeat the above steps to set the time. Once the time is set, press the OK button on the left side of the multifunction steering wheel to confirm and apply the settings.
13
2
Share

How to Solve Front Wheel Wobble?

First, check the manufacturer's recommended tire pressure, which is typically set between 2.0 bar and 2.5 bar for most family cars. If the deviation worsens during braking, it is necessary to recheck the braking system and replace any faulty components.
8
0
Share

How to File an Insurance Claim for a Scratch on the Car?

First, the policyholder needs to call the insurance company's claim hotline to obtain a claim number. Then, take the claim number to the damage assessment center for evaluation. Next, the policyholder should take the damage assessment report to a repair shop. If the repair shop is a partner of the insurance company, the policyholder can leave after the repairs are completed. Then, the policyholder must personally visit the insurance company to provide the necessary documents, including the claim application, damage assessment report, repair invoice, repair list, and a copy of their ID card. Finally, the policyholder just needs to wait for the case to be settled.
10
1
Share

How to Repair Minor Scratches on Headlights?

You can use toothpaste for polishing, as toothpaste contains abrasive particles. Apply toothpaste to the headlight and then rinse it off with water. For longer scratches and cracks on car headlights, you can use fine wood sandpaper to sand them down, followed by polishing with polishing wax. The principle is similar to polishing the paint surface. Use nano-spray coating for renovation and repair, including sanding, degreasing, spray coating, and spectral hardening. The repair process strictly follows the original headlight manufacturing process.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.