What is the original factory oil for Hyundai ix35?

1 Answers
IvanLynn
07/30/25 9:26am
Modern ix35's original factory oil model is 5w20. The following are the relevant instructions: 1. The letter w in the oil model is an abbreviation for winter, representing winter. If there is a letter w in the oil model, it means that this oil can be used normally in winter. 2. The number before w indicates the low-temperature fluidity of the oil. 0w means the oil can flow normally at minus 35 degrees Celsius; 5w means the oil can flow normally at minus 30 degrees Celsius. 3. The number after w indicates the high-temperature viscosity of the oil. The larger the number, the greater the viscosity. 4. When choosing oil viscosity, be sure to select it according to the technical characteristics of your car's engine. 5. Generally, a naturally aspirated engine can use oil with a viscosity of 20 or 30; generally, a turbocharged engine needs to use oil with a viscosity of 30 or 40.
Was this review help?
5
5
Share
More Forum Discussions

What is the ground clearance of the new Teana?

Teana's ground clearance is 138 millimeters. Introduction to the chassis: The automotive chassis consists of four parts: the transmission system, the running system, the steering system, and the braking system. The chassis serves to support and install the car engine and its various components and assemblies, forming the overall shape of the car, receiving the power from the engine to make the car move and ensuring normal driving. Precautions: The chassis operates in a very harsh environment for a long time, suffering the most damage and erosion. When driving in the rain, the chassis comes into direct contact with rainwater; when driving in the snow, the chassis comes into direct contact with cold snow. These special road conditions can cause significant damage to the chassis. Therefore, timely inspection of the chassis's rust level is one of the important measures to effectively protect the chassis.
16
1
Share

How to adjust the clock on the 8th generation Civic?

The method to adjust the clock on the 8th generation Civic is: Press and hold the clock button until you hear a beep, then release the button. The time display will start flashing. To set the hour, press and hold the preset button (H end, preset button 4) until the hour reading increments to the desired time. To set the minutes, press the M end (preset button 5), following the same principle as setting the hour. Then press the clock button to confirm the set time. The 8th generation Civic is equipped with a 1.5T turbocharged engine, delivering a maximum power of 130 kW and a maximum torque of 220 Nm. It is paired with a CVT continuously variable transmission. The front suspension is a MacPherson independent suspension, and the rear suspension is a double-wishbone independent suspension.
15
4
Share

What transmission does the Besturn B50 have?

Besturn B50 automatic transmission model is the Volkswagen EA113 engine. Definition of transmission: The transmission is a gearbox that changes the transmission ratio and the direction of movement. It is located between the clutch and the central drive. The main functions of the transmission: under the condition that the engine speed and torque remain unchanged, change the driving force and speed of the vehicle (gear shifting); enable the vehicle to drive in reverse (direction change); the engine can stop without stalling (neutral gear). According to the transmission type, gear-type transmissions can be divided into three types: two-shaft type, three-shaft type, and combined type. Two-shaft type: The two-shaft type has two main shafts (excluding the reverse gear shaft) and only undergoes one pair of gear reduction. Three-shaft type: The three-shaft type has three main shafts (first shaft, intermediate shaft, second shaft) and undergoes two pairs of gear reduction. Combined type: The combined type consists of two transmissions connected in series or parallel to obtain more gears with fewer gears.
1
5
Share

How to Reset the Maintenance Light on Roewe i5?

Roewe i5 maintenance light reset method: 1. Turn on the ignition switch, and press and hold the "MODE" button for more than 5 seconds while the "OIL" symbol is displayed on the combination instrument information display. 2. After the "OIL" starts flashing, quickly press the "MODE" button five or more times. 3. After the "OIL" symbol flashes three times and goes off, the maintenance reminder warning light will turn off, and the reset operation is completed. Below is some related information about the maintenance light: When the maintenance light comes on, it indicates that the vehicle's scheduled maintenance period has arrived, and maintenance should be performed promptly. Not all vehicle models can be manually reset; some models require specialized manufacturer equipment to clear the code.
17
4
Share

How many points are deducted for touching the left dashed line during parallel parking?

Deduct 10 points for touching the left dashed line during parallel parking. Here are relevant details: 1. Parallel parking penalty criteria: Driving with tires touching the parking space or lane lines deducts 20 points; After parking, if the vehicle body exceeds the parking space lines, deduct 20 points; Failing to align the vehicle properly after parking deducts 5 points; Inability to park within one forward and one reverse movement deducts 20 points; Contacting the marker poles deducts 20 points. 2. Parallel parking precautions: Adjust both side mirrors - lower the left mirror to see the left rear wheel, and adjust the right mirror to see the vehicle body. Also, adjust the interior rearview mirror to see the center of the rear windshield when looking up. Additionally, pay attention to turn signal usage, as failure to use them as required will also result in point deductions.
15
4
Share

What is the license plate prefix for Datong?

Datong license plates start with Jin B. License plates in Shanxi Province: Jin A for Taiyuan, Jin B for Datong, Jin C for Yangquan, Jin D for Changzhi, Jin E for Jincheng, Jin F for Shuozhou, Jin H for Xinzhou, Jin J for Lvliang, Jin K for Jinzhong, Jin L for Linfen, Jin M for Yuncheng. Here is more information about vehicle license plates: 1. Vehicle license plates are standardized hard-coded registration plates issued by vehicle management authorities after reviewing, inspecting, and registering vehicles that apply for plates. They typically come in pairs and are installed at designated positions on the front and rear of the vehicle. 2. Vehicle license plates serve as legal permits allowing vehicles to operate on roads. They enable traffic management departments, public security authorities, and the general public to monitor, identify, remember, and track vehicle movements.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.