What is the original engine oil model for the 14th-generation Sylphy?

What does 'service' mean when it appears on a car?

"Service" is a maintenance reminder, alerting the car owner to perform maintenance at specified mileage intervals as needed. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. After a car reaches a certain mileage, the owner should promptly replace the necessary parts. After maintenance is completed, the maintenance reminder light needs to be reset following a specific procedure to turn it off. If the indicator remains after maintenance, the following steps can be taken to clear it (methods may vary for different car models): 1. Insert the key but do not turn it. 2. Press and hold the lever next to the odometer for 5-10 seconds, then turn the key to the "on" position. 3. After another 5-10 seconds, start the car. Continue holding the lever throughout this process without releasing it. Following these steps should clear the wrench indicator. If it does not clear, repeat the same process.

19

2

Share

What to Do When Your Car Gets Scratched and the Culprit Can't Be Found?

Here are the solutions when your car gets scratched and the culprit can't be found: 1. Check the dashcam. High-quality dashcams can clearly record real-time situations from all angles. By reviewing the footage and screenshots, you can identify the target and find the culprit. 2. Report to the police promptly. After filing a case, the police will investigate using various technical means. 3. Contact your insurance company. Important notes: If the scratch is minor, try to avoid making a claim because payouts are calculated based on the number of claims, which can lead to increased premiums. If your car is scratched, stay at the scene and don't leave, otherwise you'll only receive 70% of the payout. For severe damage, you can file a claim under the comprehensive car insurance. Before contacting the insurance company, consider whether it's worth it.

8

3

Share

What procedures are required for car color change?

The "Motor Vehicle Modification Registration Application Form", original and photocopies of the identity proofs of the vehicle owner and agent, the motor vehicle registration certificate, and the motor vehicle driving license are the necessary procedures for applying to change the color of a motor vehicle's body. According to Article 6 of Chapter 2 of the "Road Traffic Safety Law", if the color change area of a motor vehicle does not exceed 30%, there is no need to go through the modification registration. Conversely, if it exceeds 30%, it must be filed and recorded, and the registration must be completed within 10 days after the vehicle color change. Precautions for vehicle wrap color change: Before preparing to change the color of a vehicle wrap, it is necessary to consult the vehicle management office where the vehicle is registered to see if the region allows the use of wraps to change the vehicle color. If the region does not support this method, the modification cannot be filed, and the wrap must be completely removed to restore the vehicle's original color. Additionally, according to the "Motor Vehicle Registration Regulations", owners are no longer required to apply to the vehicle management office in advance. They can first change the vehicle color, install body kits, replace the engine, etc., and then apply to the vehicle management office for modification registration. According to Article 10, registered motor vehicles must apply for modification registration in the following cases: Change of body color. Replacement of the engine. Replacement of the body or frame. Whole vehicle replacement due to quality issues. Change of use nature, such as commercial vehicles converted to non-commercial use or vice versa. The owner's residence moves out of or into the jurisdiction of the vehicle management office. Furthermore, according to Article 15 of the "Road Traffic Safety Law of the People's Republic of China": police cars, fire trucks, ambulances, and engineering rescue vehicles should be painted with specified patterns and equipped with alarms and signal lights as required. Other motor vehicles are not allowed to paint, install, or use the above-mentioned special or similar patterns, alarms, or signal lights. Article 56 of the "Motor Vehicle Registration Regulations" states that if the body color is changed without going through the modification registration as required, the public security traffic management department will issue a warning or impose a fine. The vehicle may also be impounded and required to revert to its original color.

20

4

Share

How to Remove the Steering Wheel Airbag on a Nissan Teana?

There are the following methods to remove the steering wheel airbag of the Teana: 1. First, straighten the steering wheel, then insert a small flat-head screwdriver into the left disassembly hole, align it with the metal strip inside the left hole, and push hard until the gap on the left side of the airbag becomes larger. 2. Use the same method to enlarge the gap on the right side of the airbag. Then insert the small flat-head screwdriver into the lower disassembly hole, align it with the metal strip inside the lower hole, and push hard until the gap on the lower side of the airbag becomes larger. 3. Then unplug the airbag connector, and the airbag will be removed at this point. Below is some related information about the airbag system: 1. The airbag system is a passive safety protection system that, when used in conjunction with seat belts, can provide effective collision protection for occupants. 2. The airbag sensors are installed on the left, right, and middle of the cabin partition; the middle airbag sensor and the airbag system are installed together with the electronic control device.

8

1

Share

What Causes Uneven Tire Wear on Trucks?

The causes of uneven tire wear on trucks are as follows: 1. Incorrect wheel alignment causes the four tires to deviate from the standard horizontal and vertical straight lines. This leads to uneven wear on the same side tires as they roll, or the front/rear wheels not tracking straight, forcing the vehicle to self-correct. This results in abnormal friction and accelerated wear on specific parts of certain tires. 2. Inaccurate toe adjustment can also cause uneven wear. Toe refers to the slight inward tilt of front wheels (similar to pigeon-toed stance), which is the optimal angle for high-speed stability. All vehicles have a toe angle, and improper adjustment leads to uneven wear, similar to the first point. 3. Uneven or deformed chassis frame can cause uneven wear. For example, some accident vehicles experience uneven tire wear due to chassis/body deformation.

4

3

Share

What is the Difference Between Shock Absorbers and Suspension?

Suspension and shock absorbers are not the same type. Shock absorbers are a component within the suspension system. Shock absorbers, also known as dampers, serve as the vehicle's cushioning device. The suspension system refers to the entire support system composed of springs and shock absorbers between the body and the tires. The main differences lie in the following three aspects: 1. Different Functions: The suspension's role is to support the vehicle body and provide vibration damping. Shock absorbers are divided into spring shocks and hydraulic shocks, with the primary function of damping vibrations. Hydraulic shock absorbers. 2. Different Structures: A typical suspension system mainly includes elastic elements, guiding mechanisms, and shock absorbers. Shock absorbers are broadly categorized into two types: spring shocks and hydraulic shocks. 3. Different Designs: A common design feature of the MacPherson suspension is its simple structure, lightweight, and compact size, which results in faster response and rebound speeds, making the suspension's damping capability relatively stronger. Shock absorbers are divided into spring shocks and hydraulic shocks. Due to the physical properties of springs, they deform under force and oscillate back and forth, which can translate into a bouncy feeling in the car, but springs are low-cost and can bear heavy loads. Hydraulic shocks offer smoother and more stable damping, though they have a relatively lower load capacity and higher cost.

8

2

Share

What is the original engine oil model for the 14th-generation Sylphy?

What does 'service' mean when it appears on a car?

What to Do When Your Car Gets Scratched and the Culprit Can't Be Found?

What procedures are required for car color change?

How to Remove the Steering Wheel Airbag on a Nissan Teana?

What Causes Uneven Tire Wear on Trucks?

What is the Difference Between Shock Absorbers and Suspension?

What to Do When a Small Dent is Made on the Car Door?

What Are the Possible Causes of Abnormal Noise from the Left Front Wheel?

What level is the Mercedes-AMG GT?

What Maintenance Items Are Needed After Buying a Used Car?