What is the original engine oil model for Great Wall Fengjun 5?

2 Answers
Janice
07/29/25 4:47am
Great Wall Fengjun 5 uses 5W-30 engine oil as original equipment. Below are relevant introductions about engine oil: 1. Functions of engine oil: The main functions of engine oil are lubrication, cleaning, and heat dissipation. In fact, many parts of vehicles use engine oil, but the oil that needs to be replaced every 5000 kilometers refers to engine oil. Most people generally use semi-synthetic and fully synthetic engine oils, with conventional oil being rarely used. Conventional oil is typically used in agricultural machinery, tricycles, and motorcycles. 2. Replacement mileage: Conventional oil: 5000 kilometers, Semi-synthetic oil: 7500 kilometers, Fully synthetic oil can go up to 10000 kilometers before requiring maintenance.
Was this review help?
17
5
Share
ZaneDella
08/12/25 8:28am
I've been driving the Great Wall Wingle 5 for several years, and the factory-recommended oil for this vehicle is SAE 10W-40. I remember using this oil every time during maintenance at the 4S shop. It feels smooth when the engine runs, and the car starts without any hiccups in winter, much better than switching to other cheaper oils. If you stick with the factory oil long-term, it not only protects the engine from wear but also saves on repair costs, as the oil circuit design is well-matched. I recommend checking the oil level and color every 5,000 kilometers and replacing the filter on time for peace of mind. Don’t opt for lower-viscosity oil just to save trouble, or the lubrication may be insufficient in summer heat, causing the engine to overheat and break down. Drive smoothly, avoid sudden acceleration, and you can extend the oil's lifespan.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

How to Replace Electric Parking Brake Pads?

Electric parking brake pad replacement method is: 1. Open the engine compartment to check the brake fluid level height to prevent overflow during replacement; 2. Remove the wheel where the brake is located; 3. Remove the brake caliper bolts and take out the brake pads; 4. Install new brake pads, tighten the guide bolts, and complete the replacement. Brake maintenance methods include: 1. High-temperature protection to prevent brake system corrosion; 2. Clean oil stains from brake discs, drums, and pads to maintain good heat dissipation; 3. Regularly replace brake fluid; 4. Periodically check the thickness of brake pads or shoes.
18
5
Share

What is the operating method of cruise control?

The operating method of cruise control is: 1. Press the on/off key to activate the system; 2. Accelerate to the desired speed, then press the set key, at which point your right foot can release the accelerator pedal, and the speed will be fixed at the current rate; 3. You can use the res+ and set- keys to make fine adjustments to the speed; 4. To cancel cruise control, either press the brake, press the cancel key, or press the on/off key; 5. Press the res key to resume the previously set cruise control speed. The principle of cruise control is: the cruise control component reads the pulse signal from the vehicle speed sensor and compares it with the set speed, then issues commands to the servo mechanism to adjust the throttle opening degree, either increasing or decreasing it, so that the vehicle always maintains the set speed.
12
1
Share

How many decals should be affixed to a new car?

Three decals should be affixed to a new car, including the compulsory traffic insurance decal, annual inspection decal, and annual road and bridge toll pass decal. The auto insurance decal is an oval-shaped built-in decal issued by the insurance company to the policyholder, certifying that the motor vehicle has compulsory traffic accident liability insurance. It contains the following information: 1. Policy number; 2. License plate number; 3. Insurance period; 4. Name of the underwriting company; 5. Service hotline. The steps for affixing the insurance decal are: 1. Clean the front windshield thoroughly; 2. Prepare a static cling sticker and place it on the upper right corner of the front windshield; 3. Affix the insurance decal onto the static cling sticker in the upper right corner of the front windshield, then smooth out any air bubbles in the middle.
7
2
Share

What is a VIN code?

VIN code refers to the Vehicle Identification Number, which consists of 17 characters representing: 1. The first digit indicates the geographic region; 2. The second digit indicates the country; 3. The third digit indicates the vehicle manufacturer; 4. The fourth to eighth digits indicate the vehicle characteristic code; 5. The ninth digit is a check digit; 6. The tenth digit indicates the model year; 7. The eleventh digit indicates the assembly plant; 8. The twelfth to seventeenth digits indicate the production sequence number. The functions of the VIN code are: 1. To confirm the identity of the vehicle; 2. For traffic violation inquiries; 3. For vehicle batch inquiries; 4. For precise parts lookup. The locations of a car's VIN code include: 1. The lower right corner of the front windshield; 2. On the door hinge pillar or door lock pillar; 3. In the engine compartment; 4. On the left side of the dashboard; 5. In the chassis number field on the vehicle registration certificate.
14
3
Share

Can alcohol be sprayed inside the car for disinfection?

Alcohol can be used to disinfect the interior of a car, as it has sterilizing and disinfecting properties. However, it is recommended to use a wiping method instead of direct spraying. Precautions for using alcohol to disinfect a car include: 1. Alcohol is a flammable and explosive product, so it should be wiped dry immediately after spraying; 2. Ensure good ventilation by opening the car windows, and try to spray on the surface of objects, avoiding hidden or hard-to-reach areas inside the car; 3. After disinfecting the car, avoid smoking inside or closing the windows, as rising temperatures can reach the ignition point of alcohol, increasing the risk of explosion or fire; 4. After wiping with alcohol, special attention should be paid to leather seats, as they may be damaged.
20
2
Share

What engine does the GAC Trumpchi GS4 have?

The Trumpchi GS4 is equipped with a 1.5L turbocharged engine. Here are the extended details: Trumpchi GS4 engine specifications: Maximum power is 124kW, achieved at 5000rpm. Maximum torque is 265Nm, available between 1700 to 4000rpm. Trumpchi GS4 body specifications: The Trumpchi GS4 is a compact SUV with the following dimensions: length 4545mm, width 1856mm, height 1668mm, wheelbase 2680mm, fuel tank capacity 55L. It features MacPherson strut front suspension and multi-link independent rear suspension.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.