What is the original battery model of the Dongfeng Peugeot 408?

2 Answers
Mateo
08/31/25 5:21am
The original battery model of the Dongfeng Peugeot 408 is L2400. Taking the 2020 Dongfeng Peugeot 408 as an example, it is a compact car with body dimensions of 4750mm in length, 1820mm in width, and 1488mm in height, with a wheelbase of 2730mm and a curb weight of 1325kg. The 2020 Dongfeng Peugeot 408 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 136PS, a maximum torque of 230Nm, and a maximum power of 100kW, paired with a 6-speed dual-clutch transmission.
Was this review help?
5
4
Share
MiaDella
09/12/25 8:36am
As a Peugeot 408 owner with years of driving experience, I clearly remember the original battery was model L3-800, with a capacity of 60 ampere-hours and voltage of 12 volts. This size matches the vehicle's electrical circuit design perfectly - using other models may cause starting difficulties or electronic device malfunctions. Car batteries tend to age over time, typically requiring replacement every 2-3 years; otherwise, cold starts in winter often result in breakdowns. I recommend owners regularly check voltage with a multimeter and keep terminals clean to prevent rust. Proper battery maintenance avoids towing troubles and ensures safer driving. While battery technology has advanced nowadays, choosing original factory specifications remains the most worry-free option.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

How to Replace the Power Steering Fluid for Focus?

The method for replacing power steering fluid in a Focus is as follows: 1. Start the car and use an oil extractor to completely remove the old fluid. 2. Inject new power steering fluid, then turn the steering wheel back and forth to allow the new fluid to circulate. 3. Extract the fluid from the power steering reservoir again, then refill with new fluid and turn the steering wheel once more. 4. Perform a third extraction of the fluid and refill with new fluid. 5. Start the car to allow the new power steering fluid to circulate fully. Information about power steering fluid: 1. Power steering fluid is a special liquid used in the car's power steering pump. Through hydraulic action, it makes the steering wheel very easy to turn, similar to automatic transmission fluid, brake fluid, and shock absorber fluid. 2. For cars equipped with hydraulic power steering systems, avoid holding the steering wheel at full lock for extended periods during use, as this can damage the power steering pump.
12
5
Share

What are the differences between Honda Vezel and XR-V?

The differences between Honda Vezel and XR-V lie in their body dimensions: The Vezel measures 4328mm in length, 1772mm in width, and 1605mm in height; while the XR-V measures 4328mm in length, 1772mm in width, and 1610mm in height. Both the Honda Vezel and XR-V have a wheelbase of 2610mm and a fuel tank capacity of 50 liters. Both models are equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 96kW and a maximum torque of 155Nm, paired with a 6-speed manual transmission. They feature a front MacPherson strut independent suspension and a rear torsion beam suspension.
17
0
Share

What does the yellow engine light on the car dashboard mean?

This is the ECU alerting that there is a fault in the engine. Below are the relevant details about the yellow engine light on the car dashboard: 1. There are two scenarios when the yellow engine light on the car dashboard illuminates. The first is when the car's power is turned on, and the vehicle performs a self-check. During this time, not only the yellow engine light but also other fault lights will illuminate and then turn off together, which is a normal phenomenon. The second scenario is when the yellow engine fault light remains on after the car is started. This indicates that the ECU is alerting to a fault in the engine, which is an abnormal phenomenon. 2. When the engine fault light on the dashboard is illuminated, you can try starting and turning off the vehicle three times in a row, or disconnect the negative terminal of the engine battery, wait for 30 seconds, reconnect it, and then attempt to start the car. After performing the above methods, check if the engine fault light on the dashboard is still on. It's important to note that when the engine fault light on the dashboard is illuminated, it usually cannot be manually reset. Typically, the light can only be turned off after troubleshooting with a 4S store's fault diagnostic tool.
8
4
Share

How to use the hill start assist on Volkswagen Teramont X?

To use the hill start assist function on the Volkswagen Teramont X, you need to press and hold the brake pedal for a few seconds before starting uphill. Then, move your foot off the brake pedal - the system provides a 2-second hold time during which you can press the accelerator to start climbing. The hill start assist comes pre-installed with the system and does not require manual activation. This feature is designed to prevent difficulty when starting on an incline by temporarily applying brakes to all four wheels to prevent the vehicle from rolling backward. The conditions for activating the hill start assist system are as follows: 1. The vehicle must be stationary. 2. The slope angle must be ≥7%. 3. Front seat occupants must have their seat belts fastened. 4. The auto-hold function must not be engaged. 5. The parking brake must not be applied. 6. Seat belts must be fastened for safety.
20
4
Share

How to Open the Front Hood of a Leiling?

There is a release handle located under the dashboard near the driver's left calf, facing towards the front of the car. Pulling this handle will cause the hood to pop up by approximately 1cm, after which you can lift the hood with some force. Below is some relevant information about the hood: 1. For objects moving at high speeds through the air, the air resistance and turbulence generated by the airflow around the object can directly affect its trajectory and speed. The shape of the hood is designed to effectively adjust the direction of airflow relative to the car's movement and the resistance it generates, thereby reducing the impact of airflow on the vehicle. Through airflow redirection, air resistance can be decomposed into beneficial forces that increase the downward force on the front wheels, enhancing the vehicle's driving stability. The streamlined appearance of the hood is fundamentally designed based on this principle. 2. It protects the engine and surrounding pipeline components. Beneath the hood lie critical components of the car, including the engine, electrical circuits, fuel system, braking system, and transmission system, all of which are vital to the vehicle. By enhancing the strength and construction of the hood, it can effectively prevent adverse effects such as impacts, corrosion, rainwater, and electrical interference, ensuring the vehicle operates normally.
2
4
Share

What is the difference between L and T in engines?

The difference between L and T engines lies in their intake systems: a T engine's intake system is equipped with a forced induction system, while an L engine's intake system is naturally aspirated. An engine is a machine that converts one form of energy into another, typically transforming chemical energy into mechanical energy. The engine serves as the power source for a vehicle, determining its performance, fuel efficiency, stability, and environmental friendliness. Methods for engine maintenance include: 1. Regularly changing the engine oil and oil filter; 2. Maintaining good crankcase ventilation; 3. Periodically cleaning the crankcase; 4. Regularly cleaning the fuel system; 5. Routine maintenance of the radiator.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.