What is the original battery model of the Baojun 510?

Which generation is the Honda L15BS engine?

Honda L15BS is the 2nd generation engine. Disadvantages of Honda L15BS: Carbon buildup may occur, and severe cases can lead to engine stalling. Performance of Honda L15BS: Over 110 horsepower at 1200 RPM. Features of Honda L15BS: In addition to improving power output and fuel economy, it also enhances engine warm-up speed. Honda L15BS: The new vehicle is equipped with a 1.5T engine coded L15BS, with a maximum power of 130kW (177 horsepower). For a compact SUV, the power is very strong. Referring to the acceleration level of the previous Civic, this XR-V's 0-100 km/h acceleration time is likely to be under 8 seconds.

10

0

Share

What's the reason a motorcycle can start without inserting the key?

Motorcycle can start without inserting the key is due to a damaged or worn key switch, which needs to be replaced. Specific steps for replacing the key switch: First, unscrew the screws fixing the instrument panel cover and open the cover. Reasons why the motorcycle doesn't respond when turning the key: The main cause of this fault lies in the battery connection. When troubleshooting, first check the fuse, then inspect the tightening screws on the battery terminals, and focus on examining the connecting wires from the battery to the main line. However, battery failure cannot be ruled out. The development of motorcycles is like climbing stairs, the higher you go, the more advanced they become.

9

3

Share

What to Do If Car Documents Are Lost?

If you lose something, you need to report it to the local police station. The police station will issue a certificate proving the loss of the invoice, and only then can the vehicle management office reissue other documents. If only the vehicle license is lost, you can directly apply for a replacement at the vehicle management office. Below are the required materials for applying for a replacement or renewal of the motor vehicle registration certificate: 1. 'Application Form for Replacement/Renewal of Motor Vehicle License Plates and Certificates'; 2. Proof of identity of the vehicle owner and a copy; 3. For replacing the motor vehicle registration certificate, a 'Stolen Vehicle Inquiry Form' must be submitted; 4. For renewing the motor vehicle registration certificate, the original motor vehicle registration certificate must be submitted; 5. If an agent handles the process, the agent's proof of identity and a copy must also be provided.

20

3

Share

Is It Necessary to Install Additional Sealing Strips on a Car Yourself?

Whether to install additional sealing strips on a car depends on individual circumstances. Functions of car sealing strips: Car sealing strips serve to fill various gaps and spaces between the components of the car body. They provide functions such as shock absorption, waterproofing, dust prevention, sound insulation, and decoration, thereby enhancing the comfort of the driving experience and protecting the car body. Disadvantages of sealing strips: The sound insulation effect is not very noticeable. After installing door sealing strips, they can easily become clogged, which may lead to poor drainage in the door. This can result in damage to the door window lift motor or rusting of the door panel. Additionally, the installation of sealing strips can affect the overall appearance of the car, making the doors more conspicuous. If the sealing strips fall off, the adhesive residue left on the car paint can be difficult to remove.

16

5

Share

How to Remove the Rear Seats of a Focus?

Method for removing the rear seats of a Focus: 1. Push the clips on both sides of the rear seat cushion inward and lift the cushion; 2. Unscrew the bolts between the seat cushion and the backrest; 3. Remove the seat cushion and the rear backrest; 4. Remove the bolts under the rear backrest; 5. Hold the hooks behind the seat cushion and backrest firmly and lift the rear seats upward. Taking the 2020 Focus as an example, its body dimensions are: length 4378mm, width 1810mm, height 1468mm, wheelbase 2705mm, minimum ground clearance 195mm, fuel tank capacity 53l. It is equipped with a 1.5l naturally aspirated engine, with a maximum horsepower of 122ps, maximum torque of 153nm, and maximum power of 90kw.

4

Share

What parts need to be replaced for engine misfire?

Engine misfire requires replacement of cylinder liners, pistons, etc. Causes of cylinder scoring: Severe piston misalignment, cylinder liner roundness and cylindricity tolerances exceeding allowable ranges, greatly reducing the sealing between pistons and cylinder liners. High-temperature gases in the cylinder leak downwards, destroying the oil film between pistons and cylinder walls, leading to cylinder scoring and poor break-in. Engine misfire: Engine misfire refers to insufficient power caused by engine failure, resulting in lack of power where a minority of cylinders in the total number are not functioning. Engine misfire shortens the lubrication oil usage cycle, easily causes sudden stalling, increases fuel consumption, produces black smoke, and results in power loss.

2

3

Share

What is the original battery model of the Baojun 510?

Which generation is the Honda L15BS engine?

What's the reason a motorcycle can start without inserting the key?

What to Do If Car Documents Are Lost?

Is It Necessary to Install Additional Sealing Strips on a Car Yourself?

How to Remove the Rear Seats of a Focus?

What parts need to be replaced for engine misfire?

What is the size of a parking space?

When can I take the Subject 4 exam after passing Subject 3 in the driving test?

What are the symptoms of a broken compressor?

What is the method for removing the wipers on the Nissan Qashqai?