What is the order of passage for vehicles at an intersection without traffic lights?

What is the correct method for adding refrigerant?

There are two methods for adding refrigerant: 1. High-pressure side charging: Charging from the bypass port (multi-purpose channel) of the compressor discharge valve (high-pressure valve) is called high-pressure side charging, and the refrigerant added is in liquid form. It is characterized by safety and speed, and is suitable for the first charging of the refrigeration system, i.e., the system charging after leak detection and vacuuming. However, it must be noted that the compressor must not be turned on during charging (the engine must be stopped), and the refrigerant tank must be inverted. 2. Low-pressure side charging: Charging from the bypass port (multi-purpose channel) of the compressor suction valve (low-pressure valve) is called low-pressure side charging, and the refrigerant added is in gaseous form. It is characterized by slow charging speed and can be used when supplementing refrigerant to the system.

3

5

Share

Which highway is the S7 code for?

Highway S7 code refers to the Huchong Expressway. The Huchong Expressway, formerly known as A13 Highway, Chongming Cross-River West Line, and Riverside Expressway (Phase II). The S7 Expressway starts from the northwest section of Shanghai Outer Ring Expressway and ends at the Chongming section of Hushan Expressway, with a total length of approximately 28.7 kilometers. The principles for naming national expressways are as follows: 1. The naming of national expressway network routes should follow the general rules of highway naming. 2. The names of national expressway network routes are composed by adding a hyphen "－" between the starting and ending place names in the order of the route's start and end points. The abbreviated name of the route is represented by the first Chinese character of the starting and ending place names, or by the abbreviation of the province (city) where the starting and ending points are located. 3. The names and abbreviations of national expressway network routes cannot be repeated. 4. When two or more sections have the same starting and ending points, they are arranged in order from east to west or north to south.

7

1

Share

What to Do When a Motorcycle Won't Start After Sitting for a Long Time?

Check if the motorcycle's switch is turned on. Verify if there is gasoline in the fuel tank. Observe whether the spark plug is igniting normally. If the ignition is unstable, clean the carbon deposits from the spark plug head. Below is more information about spark plugs: 1. The spark plug is a critical component of a motorcycle engine. The normal combustion of the air-fuel mixture is key to the engine's proper operation. First, the type of spark plug used varies by engine, mainly differing in heat range and thread size, so it's essential to use the specified spark plug model. 2. For normal engine combustion, unscrew the spark plug and observe; the electrodes should normally be reddish-brown. If they appear black, indicating carbon deposits, it means the air-fuel mixture is too rich and combustion is incomplete. Clean the carbon deposits using a pointed tool to remove buildup from the central electrode groove and the L-electrode.

3

5

Share

Is Car Coating Effective?

Car paint coating is useful as it plays a certain role in maintaining the car's new appearance. This method can effectively preserve the vehicle's brightness, making it look as shiny as new. Moreover, it helps protect the car from scratches, preventing easy damage. Car paint coating technology applies a protective film to maintain good brightness, but it's not without drawbacks. It is prone to corrosion and requires regular maintenance, typically every six months. Car paint coating is a transparent protective film applied to the car's surface. This film removes the oxidation layer on the paint, forming a transparent inorganic membrane that enhances the paint's brightness, then protects this brightness with the coating. Benefits of car coating: The painted surface becomes bright and smooth, enhancing aesthetics; the coating material is close to inorganic, does not oxidize itself, and increases the paint's oxidation and corrosion resistance; high-quality coating materials can prevent static electricity, preventing chemical dust from adhering to the paint, making it easier to maintain.

3

0

Share

What type of engine oil is suitable for the Fit?

Fit is suitable for 5W30 engine oil, where: 1. 5W stands for: The preceding number 5W indicates the minimum operating temperature of -30 degrees Celsius. W stands for winter, and the smaller the preceding number, the lower the temperature the oil can adapt to, and the better the low-temperature fluidity. 2. 30 stands for: It refers to the kinematic viscosity at 100 degrees Celsius. The larger the number, the higher the viscosity, and the stronger the resistance to high temperatures. Information about engine oil is as follows: 1. Engine oil (Engine-oil): It is the lubricating oil used by the engine, composed of base oil and additives. 2. Function: With a density of approximately 0.91×10³ (kg/m³), engine oil can lubricate and reduce friction, assist in cooling, seal and prevent leaks, prevent rust and corrosion, and provide shock absorption for the engine.

14

5

Share

How to Tell if the Car's Front is Aligned Properly While Driving?

Here are some techniques to determine if the car's front is aligned properly: 1. Use the wipers and road markings as references, maintaining a fixed distance or angle while driving. If they deviate, it indicates the front is misaligned. Additionally, depending on individual height differences, other parts of the car's front can serve as reference points, such as the roof corners or reinforcement ribs. 2. The most crucial point is to learn to look into the distance, observing distant traffic lights, the rear of the car ahead, lane markings, etc., to see if the car's body is aligned properly. 3. By the time you notice the front is misaligned and try to adjust the steering wheel, it's usually too late. You must detect the tendency of the front to drift early and make adjustments accordingly. The method is to turn the steering wheel, but be careful not to jerk it suddenly, as this can cause the car to shake and potentially lose control.

8

0

Share

What is the order of passage for vehicles at an intersection without traffic lights?

What is the correct method for adding refrigerant?

Which highway is the S7 code for?

What to Do When a Motorcycle Won't Start After Sitting for a Long Time?

Is Car Coating Effective?

What type of engine oil is suitable for the Fit?

How to Tell if the Car's Front is Aligned Properly While Driving?

What to Do When the Car Shows High Engine Water Temperature?

What does BMW 4x4 malfunction mean?

What to Do When the Third Cylinder of the Engine Misfires?

What causes unstable idle speed in a car?