···
Log in / Register

What is the optimal speed for an Alto on the highway?

4 Answers
McHarmony
07/29/25 9:10am

The optimal speed is: when fully loaded with four adults, accelerating to 120 km/h is relatively effortless. Below are the relevant details: 1. Speed: The Suzuki New Alto 1.0L manual limited edition and automatic limited edition have a top speed of 160 km/h for the manual and 150 km/h for the automatic, with an engine maximum power of 52 kW. The fuel consumption published by the Ministry of Industry and Information Technology ranges between 5.2L and 5.7L, making it a fuel-efficient compact car. 2. Power: The latest information reveals that the New Alto Turbo-RS will be equipped with a three-cylinder 0.66L engine. This 0.66L three-cylinder turbocharged engine delivers a maximum power of 47 kW and a maximum torque of 98 Nm.

Was this review help?
10
5
Share
DiDaisy
08/12/25 8:43am

For a small car like the Alto on the highway, I think the optimal speed depends on safety and performance. From my experience, it's best to maintain between 80 to 90 kilometers per hour. At higher speeds, the body tends to shake and become unstable, making it harder to react in case of strong winds or slippery roads. The small-displacement engine can also overheat if driven too fast, affecting its lifespan. I usually refer to speed limit signs when driving, but since the Alto's power is inherently weak, pushing it to 120 km/h might damage the car and increase fuel consumption. Highway conditions can change quickly, requiring extra time for sudden braking or overtaking, so keeping the speed slightly lower is safer. During regular maintenance, the mechanic reminded me that small cars shouldn't be pushed to their highway limits—staying within a comfortable speed range is the most reassuring.

Was this review help?
14
4
Share
Expand All
ClaireFitz
10/06/25 4:09am

When it comes to fuel-saving tips for the Alto on highways, I've found that maintaining a speed between 80 to 100 km/h is the most economical. Driving too fast increases wind resistance and fuel consumption spikes, while going too slow wastes the engine's potential. After several long-distance tests, the displayed fuel consumption was lowest at around 95 km/h, achieving roughly over 20 kilometers per liter. Keeping the engine RPM steady at just over 2000 is ideal—avoid pushing it above 3000. Reduce speed slightly when using air conditioning or carrying heavy loads. Additionally, smooth acceleration and deceleration on highways can save a significant amount of fuel. Remember to regularly check tire pressure and air filters, as these details make a big difference. The car is your asset; saving fuel means saving money and being more environmentally friendly.

Was this review help?
12
1
Share
Expand All
LeNolan
11/19/25 5:37am

As a frequent driver of an Alto, I believe the optimal speed range is between 85 to 100 kilometers per hour. Going faster makes the engine roar and fuel consumption skyrocket; going slower feels frustrating. The car's lightweight structure makes it prone to instability at speeds over 110 km/h, which can damage the suspension. I always check the fluids before driving to ensure the cooling system is functioning properly. Driving steadily is better for the car and extends the engine's lifespan. After getting used to city driving, it takes some adjustment to drive on highways—don't try to compete with larger vehicles for speed.

Was this review help?
15
4
Share
Expand All
More Forum Discussions

What is the ground clearance of the Senova X35?

The ground clearance of the Senova X35 is 170mm. The Senova X35 is a compact SUV launched by BAIC Motor. The minimum ground clearance of a vehicle refers to the height of the chassis, specifically the minimum distance between the bottom of the vehicle and the level ground under maximum load conditions. The minimum ground clearance directly affects the vehicle's off-road capability. The dimensions of the Senova X35 are 4300mm in length, 1815mm in width, and 1640mm in height, with a wheelbase of 2570mm. The Senova X35 is equipped with a fuel-efficient 1.5L naturally aspirated engine, delivering a maximum power output of 85kw and a peak torque of 148nm.
15
2
Share

Should You Pull the Clutch When Going Downhill on a Motorcycle?

When going downhill on a motorcycle, you should not pull the clutch. Depending on the steepness and length of the slope, use the appropriate gear and speed, making full use of engine braking while also using the foot brake to control the speed. Pulling the clutch at this time will cause the bike to coast freely. The clutch should only be used when shifting gears or stopping. Avoid coasting in neutral and instead combine engine braking with the brakes to achieve early deceleration. A motorcycle consists of five main components: the engine, transmission system, running gear, steering, braking system, and electrical instrumentation. The engine is typically a two-stroke or four-stroke gasoline engine with high RPM, usually above 5,000 revolutions per minute. The engine crankcase is integrated with the clutch and gearbox, resulting in a compact design.
10
3
Share

What are the reasons for sudden fuel supply failure while driving?

The reasons for sudden fuel supply failure while driving: 1. Issues with the ignition system; 2. Throttle malfunction or intake manifold air leakage; 3. Fuel pump unable to build sufficient pressure, fuel injector unable to spray enough fuel; 4. Oxygen sensor failure; 5. Fuel line blockage causing poor acceleration; 6. Damaged car filter unable to function properly. Solutions for car fuel supply issues: 1. Remove and inspect the fuel pump. If excessive impurities are found in the car's fuel pump, timely treatment is required; 2. Check whether the car battery has sufficient charge. Insufficient battery power can lead to unstable voltage output, which may also cause car malfunctions.
3
1
Share

What Transmission Does the 10th Generation Civic Use?

The 10th generation Civic uses two types of transmissions: a 6-speed manual transmission and a CVT (Continuously Variable Transmission). The specific details are as follows: Manual Transmission: The manual transmission is also known as an MT transmission. It is currently the most stable transmission in the world due to its long development history and mature technology. Earlier manual transmissions were mostly 5-speed, but with technological advancements, many now feature 6-speed configurations. CVT Transmission: The CVT is a type of automatic transmission. Unlike other transmissions that have fixed gear ratios, the CVT does not have actual gears, resulting in smoother shifting without any noticeable jerking. However, CVTs also have drawbacks, such as limited torque capacity. In the realm of passenger vehicles, CVTs generally have the lowest cost and the least demanding technical requirements.
20
1
Share

How to replace the air conditioning filter in an Audi Q5?

Audi Q5 air conditioning filter replacement method is: 1. If replacing the air conditioning filter under the windshield on the passenger side, open the engine hood, then remove the decorative panel to take out and replace it; 2. If replacing the air conditioning filter under the glove compartment on the passenger side, the glove compartment needs to be removed, and then open the air conditioning filter cover for replacement. The air conditioning filter ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin and has strong moisture absorption. The Audi Q5 has dimensions of 4629mm in length, 1898mm in width, 1655mm in height, and a wheelbase of 2807mm. The vehicle is powered by a 2.0TFSI four-cylinder inline engine, paired with a 7-speed Stronic dual-clutch transmission.
6
3
Share

What are the differences between Ferrari 458 and 488?

Ferrari 458 and 488 differ in the following aspects: 1. Different engines: The Ferrari 458 is equipped with a 4.5L naturally aspirated V8 engine; The Ferrari 488 is equipped with a 3.9T turbocharged V8 engine. 2. Different power outputs: The Ferrari 458 has a maximum power of 570 horsepower and a maximum torque of 540 Nm; The Ferrari 488 has a maximum power of 669 horsepower and a maximum torque of 760 Nm. 3. Different body dimensions: The Ferrari 458 measures 4527mm in length, 1937mm in width, and 1213mm in height; The Ferrari 488 measures 4605mm in length, 1975mm in width, and 1206mm in height.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.