What is the optimal remaining battery level for charging new energy vehicles?

1 Answers
IanLynn
07/24/25 7:25pm
New energy vehicles have an optimal charging range between 20% and 90% battery level. Charging within this range can effectively minimize the impact on the power battery and significantly extend its service life. There are two main categories of new energy vehicles: 1. Hybrid Electric Vehicles (HEVs): These vehicles use traditional fuels while being equipped with both an electric motor and an internal combustion engine to enhance low-speed power output and reduce fuel consumption. Based on whether they can be externally charged, they can be further classified into Plug-in Hybrid Electric Vehicles (PHEVs) and Mild Hybrid Electric Vehicles (MHEVs). 2. Battery Electric Vehicles (BEVs): As the name suggests, these vehicles are primarily powered by electricity. Most BEVs directly use electric motors for propulsion, with some models mounting the motor in the engine compartment, while others integrate four motors directly into the wheels (using the wheels as rotors). The main challenge lies in electricity storage technology.
Was this review help?
3
1
Share
More Forum Discussions

What level of car does the Volkswagen Teramont belong to?

Volkswagen Teramont is a mid-size to large SUV. Taking the 2020 Teramont as an example, its body dimensions are: length 5039mm, width 1989mm, height 1773mm, wheelbase 2980mm, fuel tank capacity 70 liters, luggage compartment capacity 286 to 2415 liters, and curb weight 2005kg. The 2020 Teramont is equipped with a 2.0T turbocharged engine, with a maximum power of 137kW and a maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission. It adopts a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
5
3
Share

What to Do If the Front Bumper Is Knocked Loose?

The solutions for a loose front bumper are: 1. Tighten the screws using tools; 2. Have it inspected and repaired at a 4S shop. The front bumper is a safety device designed to absorb and mitigate external impacts, protecting the front and rear of the vehicle body. It consists of an outer panel, cushioning material, and a crossbeam. Its functions include: 1. Providing a cushioning effect during low-speed collisions to protect the front and rear body of the car; 2. Protecting pedestrians in the event of an accident with a pedestrian; 3. Adding decorative appeal. Methods to prevent front bumper damage include: 1. Installing corner rubber on the edges of the bumper; 2. Using corner indicator posts to determine the bumper's position.
4
2
Share

Why Can't the Car Key Unlock the Door?

There are several reasons why a car key cannot unlock the door: 1. The key battery is low on power; 2. The car battery is dead, preventing the key from being detected; 3. There is an issue with the key fob or the sensor module. Solutions to this problem include: 1. Replacing the battery with a new one; 2. Using the mechanical key to open the door; 3. Repairing or replacing the sensor module. The steps to replace the car key battery are: 1. Remove the mechanical key; 2. Insert a flat-head screwdriver into the "open" slot at the bottom and gently pry; 3. Once a gap appears, use the screwdriver to carefully open the key along the gap; 4. Remove the old battery and replace it with a new one.
3
1
Share

How to use the cruise control in Magotan?

The method to use cruise control in Magotan is: while driving, push the cruise control lever located on the left rear side of the steering wheel to the 'on' position. Once the vehicle reaches the desired speed, press the 'set' button on the lever. The Magotan is a mid-sized 4-door 5-seater sedan with body dimensions of: length 4865mm, width 1832mm, height 1471mm, wheelbase 2871mm, and a fuel tank capacity of 66 liters. It is equipped with a 1.4L turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110kW at 5000-6000rpm and a maximum torque of 250Nm at 1750-3000rpm.
20
1
Share

How to View Videos on a Car Dash Cam?

To view videos on a car dash cam, press the menu button and select the preview mode. A dash cam is a device that records images and audio during vehicle operation. After installation, it can document the entire driving process in video and audio, providing evidence in case of traffic accidents. The installation method for a car dash cam is as follows: 1. Use a clip to secure the dash cam near the car's rearview mirror; 2. Determine the length of the power cord and plan the wiring accordingly; 3. Tuck the power cord into the gap of the car's ceiling and guide it down along the door frame to behind the glove box.
20
1
Share

How to Use the Vehicle Anti-Slip System?

The usage method of the vehicle anti-slip system is: The anti-slip system is enabled by default and does not require manual activation. For vehicles equipped with an anti-slip system, pressing the anti-slip system button can deactivate the system, and pressing it again will reactivate it. The vehicle anti-slip system includes: 1. Brake force distribution system; 2. Anti-lock braking system; 3. Traction control system; 4. Vehicle dynamic control system. The working principle of the vehicle anti-slip system is: It determines the driving state based on sensor signals and uses a control unit that performs precise calculations. When rotation, understeer, or oversteer occurs, it individually controls each wheel to enhance vehicle stability.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.