What is the optimal position for adjusting car side mirrors?

How to Install Snow Chains on a Sedan?

The method for installing snow chains on a sedan is as follows: 1. Use a jack to lift one side of the vehicle's drive wheels, then unfold the rubber snow chains and lay them flat under the wheel; 2. Bring both ends of the snow chains together above the wheel, ensuring the chains wrap around the wheel; 3. Hook the inner side of the wheel with the snow chain hooks; 4. Pull the outer side of the snow chain mesh outward by hand and attach the outer hooks; 5. Take out the rubber side ropes and hook them to both ends of the snow chains; 6. Install the thinner side ropes diagonally to evenly distribute the tension of the rubber ropes; 7. Follow the same method to install medium and thicker side ropes.

1

5

Share

Can a Bent Steering Column Be Repaired?

A bent steering column cannot be repaired and must be replaced. The steering column is the component of the steering system that connects the steering wheel to the steering gear. Through the steering column, the driver transmits torque to the steering gear, enabling the steering gear to facilitate turning. Common types of steering columns include hydraulic power steering columns, electro-hydraulic power steering columns, and electric power steering columns, each with different systems. Check the rearview mirrors: When turning or changing lanes, you must use the turn signals, slow down, and always check the rearview mirrors before turning. For left turns, primarily check the left rearview mirror; for right turns, primarily check the right rearview mirror. For both left and right turns, always check the interior rearview mirror. Avoid staring directly in front of the car: When driving on an open road, look straight ahead about 100 meters and avoid focusing too closely on the area directly in front of the car. Depress the clutch: Generally, when decelerating at speeds above 40 km/h, there is no need to depress the clutch first. Wait until the speed drops to around 20 km/h before depressing the clutch. Steering: For high-speed turns, steer slowly; for low-speed turns, steer quickly.

13

4

Share

Why is the rear wheel of the car slightly tilted?

Car rear wheel tilt is also called tire camber. To ensure the vehicle drives straight during movement, the rear wheel camber is normal, and the front wheels may also have toe-in. Here are the relevant details: 1. Camber in civilian vehicles: Typically, original civilian vehicles have "positive camber," which is mainly used to reduce the tire contact area during straight-line driving, lower driving resistance, and improve fuel economy. The range is generally between 0.0-1.5 degrees. 2. Camber in racing cars: The "camber" mentioned in racing cars is mostly "negative camber," also known as "inward camber." Therefore, when in the pit area of a racetrack, if technicians or drivers mention "camber," it specifically refers to "inward camber," with a range typically between 0.0-6.0 degrees.

13

2

Share

What to Do When Car Rims Get Scratched?

Car rims get scratched the treatment is: 1. Check the scratches. If the damage does not reach the inner side of the hub, it can be simply repaired. Use paint thinner to wipe around the scratches to remove dirt; 2. For deeper scratches where dirt is hard to remove, use a toothpick to clean it thoroughly; 3. To avoid accidentally painting unrelated areas, carefully apply masking tape around the scratches; 4. Prepare the brush tip, apply touch-up paint, and after the paint dries and slightly shrinks, apply it slightly raised; 5. After application, it takes about a week to dry completely. Once dry, use waterproof paper dipped in soapy water to smooth the surface.

4

Share

Can I Take the Subject 1 Exam on Saturdays and Sundays?

Subject 1 exams are not scheduled on Saturdays and Sundays. Subject 1, also known as the theoretical exam or driver's theory test, is part of the assessment for obtaining a motor vehicle driver's license. The total duration of the Subject 1 exam is 45 minutes. The test consists of 100 questions, including true/false and multiple-choice questions, with a full score of 100 and a passing score of 90. The exam papers are randomly selected and combined by the computer-based driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations." Content of the Subject 1 exam: The exam includes the most basic knowledge such as driving theory, road safety laws and regulations, traffic signals, traffic rules, as well as local regulations. The scheduling of the driver's theory test is arranged by the local vehicle management offices.

14

0

Share

Can 5-year-old stock new tires be used?

Do not use 5-year-old stock new tires. Here is an introduction about tires: 1. Tire shelf life: Generally, tires should not be stored for more than 3 years from the date of production, and should not be used for more than 8 years after being installed on a vehicle. Tires are rubber products and will age even if not used. Continuing to use them poses a risk of blowouts. They can be used as emergency spare tires, but when in use, do not exceed 40 mph, avoid sharp turns, and always prioritize safety. 2. Tire replacement cycle: The service life of car tires is four years or 80,000 kilometers, whichever comes first. If there are more than 5 damages, early replacement is required. If there is damage on the sidewall, even just one, replacement is necessary. If you frequently drive on poor road conditions and the tires are severely worn, early replacement is advised.

12

0

Share

What is the optimal position for adjusting car side mirrors?

How to Install Snow Chains on a Sedan?

Can a Bent Steering Column Be Repaired?

Why is the rear wheel of the car slightly tilted?

What to Do When Car Rims Get Scratched?

Can I Take the Subject 1 Exam on Saturdays and Sundays?

Can 5-year-old stock new tires be used?

What does Toyota ignition-on mean?

What vehicle type does a motorhome belong to?

What is the Difference Between 4-Ply and 6-Ply Tires?

What is the letter designation for fully synthetic oil?