What is the optimal mileage for the first maintenance of the Buick Regal?

2 Answers
IrisFitz
07/29/25 1:42am
The optimal time for the first maintenance of the Buick Regal is at 3,000 kilometers or 3 months. Additional information about the first car maintenance is as follows: 1. Provided by the manufacturer for free: The first car maintenance is free, provided by the manufacturer, not by the 4S store. 2. Nationwide warranty: The vehicle can be serviced nationwide within the warranty period, and maintenance records can be checked at any 4S store. 3. First maintenance requirements: The first maintenance for a new car should be done within 3 to 5 months, with a mileage of 3,000 to 5,000 kilometers. Usually, it is determined by whichever comes first, the mileage or the specified first maintenance time. 4. First maintenance items: The first maintenance includes two items: oil change and oil filter replacement.
Was this review help?
10
3
Share
DeAlexa
08/12/25 5:46am
As someone who frequently helps friends with car purchases, I believe the first maintenance for the Buick Regal is generally best done around 5,000 kilometers, which is the standard for most new cars. This is because after the break-in period, the engine and transmission components need to have impurities cleaned out. Don’t do it too early—before 3,000 kilometers, for example—as the car hasn’t fully adapted yet. But don’t wait too long either; going beyond 8,000 kilometers could lead to increased wear and affect the vehicle’s lifespan. From my personal experience, during the first maintenance, it’s a good idea to also check the brake system and tire condition. In areas with poor road conditions, like mountainous regions or congested urban areas, you might consider doing it at 4,500 kilometers. Remember, timely maintenance can save you money on future repairs and even improve fuel efficiency. It’s best to check your owner’s manual or consult the 4S dealership for specific recommendations to ensure your car stays in optimal condition during the first few years—this is crucial for maintaining cost-effective vehicle ownership.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

How to Check the Oil Dipstick on the Bin Yue?

Here are the specific steps to use the oil dipstick on the Bin Yue: 1. Approximately 5 minutes after turning off the vehicle, pull out the dipstick, wipe it clean, reinsert it, wait for about 2 seconds, and then pull it out again. 2. If the oil level is between the upper and lower marks on the dipstick, it indicates a normal oil level. If it is below the lower mark, the oil is insufficient; if it is above the upper mark, there is too much oil. Below is additional information on how to check the oil dipstick in a car: 1. After turning off the car, wait for 10 minutes, then open the engine hood and locate the oil dipstick. 2. Gently pull out the oil dipstick by hand. 3. Use a clean tissue or towel to wipe off the oil on the dipstick. 4. After wiping it clean, reinsert the dipstick back to its original position, making sure it is tightly secured. 5. Pull out the dipstick again and hold it at an angle for easier viewing.
3
2
Share

Where is the auxiliary battery located in the Mercedes-Benz GLC260?

The auxiliary battery of the Mercedes-Benz GLC260 is located on the right side of the trunk. Here is more information about the Mercedes-Benz GLC260: 1. Body dimensions: The length, width, and height of the Mercedes-Benz GLC260 are 4764mm, 1898mm, and 1642mm respectively, with a wheelbase of 2973mm. The tire specification is 235/60R18. 2. Powertrain: It is equipped with a 9-speed automatic transmission, with a top speed of 213 km/h, a maximum horsepower of 197, and a maximum power of 145 kW. 3. Suspension: Both the front and rear suspensions of the vehicle are multi-link independent suspensions.
8
5
Share

Why is the Nissan Teana's one-button start not working?

The common reasons for the Nissan Teana's one-button start not working are as follows: 1. The Nissan Teana's keyless entry system has a specific authentication zone. A valid key must be detected within this effective authentication zone for normal entry and startup. Beyond this zone, normal entry and startup are impossible. The authentication zone is divided into external and internal zones. 2. The driver makes an error in the door-opening action without realizing it. When the driver pulls the door handle while simultaneously touching the small groove on the outer side of the handle, the door cannot be opened or locked. 3. The Nissan Teana has been parked for an extended period. After the car has been parked for a long time, the keyless entry may fail to work when used. This happens because the smart entry system enters a power-saving mode and stops functioning after the car has been parked for a while. To use the keyless entry again, the driver must press any button on the key to deactivate the power-saving mode, after which it will function normally.
13
3
Share

Is It Serious If the Air Conditioner Is Left On After Exiting the Car?

After the engine is turned off, leaving the air conditioner on will not have any impact. The car's air conditioner will automatically shut off once the engine is turned off because it is powered by the engine. When the engine stops, the air conditioner ceases to function. Tips for using the car air conditioner: 1. Turn it off before shutting down the engine: It is best to turn off the A/C button one or two minutes before parking and turning off the engine. This allows the fan to dry out any moisture in the air vents and ducts, preventing bacterial growth inside the air conditioner and reducing the chance of odors. 2. Turn on the air conditioner after starting: If the air conditioner is left on when the engine is turned off, the next time the vehicle is started, the engine will have to bear the load of the air conditioner. Therefore, the best practice is to wait two or three minutes after starting the vehicle, allowing the engine to be fully lubricated, before using the air conditioner.
19
1
Share

Why does the diesel engine starter make a clicking sound but fail to start?

It may be due to a lack of battery power or a faulty motor. Here is a related introduction about the diesel engine starter failing to start: Electrical circuit failure: This possibility arises when the engine stalls due to low-voltage power interruption while driving. At this time, you can mainly check the ignition and starter switches, as well as the fuse box. Electrical component failure: This issue is generally related to the ignition coil, capacitor, or electronic ignition module. The engine may start initially but then stalls after a while, only to start again and stall once more. Fuel system failure: This could be due to a damaged fuel pump, ruptured fuel line, clogged carburetor fuel inlet, or an empty fuel tank. However, in such cases, the car can still be restarted, though with great difficulty.
8
5
Share

Why is it difficult to start a diesel engine after stalling when hot?

After the engine stalls when hot, the temperature in the engine compartment remains quite high. Below is relevant information about stalling: Causes of stalling: Automatic transmission models: Vehicles with automatic transmissions do not stall easily, whereas manual transmission models may stall frequently due to poor driving skills. However, it is not impossible for automatic transmission vehicles to stall, with the main cause being the use of low-quality fuel leading to engine carbon buildup and stalling. Precautions: For automatic transmission vehicles stalling, the primary reason is the use of low-quality fuel. One solution is to fill up with higher-grade fuel at reputable, larger gas stations, such as using 97-octane gasoline. Although it is more expensive, it ensures a longer lifespan for your vehicle and better performance while driving.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.