What is the optimal mileage for the first maintenance of the Bin Yue?

2 Answers
OLeonardo
07/29/25 5:14am
The first maintenance for the Bin Yue is recommended at 5,000 kilometers, with the second maintenance scheduled at 9 months or 15,000 kilometers. The Bin Yue excels in several key areas: 1. Performance. As the first SUV model built on the BMA architecture, the Bin Yue is equipped with a 1.5T three-cylinder engine jointly developed by Geely and Volvo. It delivers a maximum power of 177 horsepower and a peak torque of 255 N·m, paired with a 7-speed wet dual-clutch transmission, enabling a 0-100km/h acceleration time of just 7.9 seconds. Additionally, the vehicle comes with advanced intelligent safety features and L2 autonomous driving assistance technology. 2. Exterior design. The Bin Yue adopts Geely's latest family design language—Time Racing Aesthetics—resulting in a youthful, stylish, and dynamic appearance. The new front grille complements the sharp front bumper design, while the sport version features a black Geely logo for the first time, accented with red interior trim to highlight individuality and enhance the sporty vibe. 3. Side profile. The vehicle employs a dual-waistline design, visually elongating the car's silhouette. The raised lines above the wheel arches create striking light and shadow effects on the body surface. 4. Rear design. The overall rear design is clean and simple. The standard version features a dual-exhaust layout, while the sport version upgrades to a quad-exhaust setup.
Was this review help?
11
4
Share
VonMarcus
08/12/25 8:51am
When I first got my Binyue, I was also confused about the first maintenance. I learned from the sales consultant that the first maintenance is usually most suitable around 5,000 kilometers, and it should not exceed 7,500 kilometers or six months at the latest. Otherwise, the engine oil may deteriorate and affect the engine. During the break-in period of a new car, metal debris can contaminate the engine oil, so early maintenance to remove these impurities can protect the core components and extend the engine's lifespan. I remember I went for the maintenance at 4,900 kilometers. The service advisor checked the engine oil, filters, and chassis, and any issues found were resolved immediately to prevent future problems. I suggest new car owners pay attention to the odometer and maintain good driving habits, avoiding excessive high-speed driving. Regular maintenance isn’t just for passing inspections—it helps avoid major repair bills. Developing good habits ensures the car lasts longer. Each maintenance session is low-cost but highly beneficial, especially since the first maintenance is often free or comes with many discounts. Don’t miss out on these opportunities!
Was this review help?
17
0
Share
Expand All
More Forum Discussions

Why is there no option for license renewal upon expiration on 12123?

Because the renewal of a driver's license upon expiration must be processed 90 days in advance, it is not visible until the renewal period. The basic functions of 12123 are as follows: 1. Information query and notification: Query and notification of motor vehicle, driver's license, and traffic violation information, as well as reminders for traffic safety information. 2. Service guidance: Guide for traffic management services. 3. Traffic management service processing: Vehicle number selection, replacement of vehicle license plates, replacement of vehicle registration certificates, replacement of vehicle inspection labels, uploading driver's license photos, renewal upon expiration, replacement due to damage, replacement due to loss, renewal for overage, exam scheduling, delayed renewal, delayed review, delayed submission of physical condition proof, handling of electronic monitoring violations, and fine payment. 4. Personal center: Personal information maintenance, binding of vehicles, binding of driver's licenses, company affiliation, online processing progress, mailing address maintenance, login password modification, gesture password modification, user deletion, and user suspension.
20
0
Share

Why does the tire pressure alarm go off in winter?

Tire pressure alarm in winter may be caused by low tire pressure. It is recommended to check if there are any signs of air leakage in the tires. If the tire pressure is normal, then you should go to the service center to check the tire pressure sensor. Related explanations are as follows: Abnormal tire pressure: Generally, the alarm will be triggered if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator light to turn on. In this case, simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation valve. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure warning light to turn on. For sensor damage issues, only a new replacement part can be installed.
12
5
Share

What is the maximum speed in first gear for a manual transmission?

Under normal conditions, the maximum speed of a manual transmission vehicle in first gear ranges from 15km/h to 40km/h. The top speed in first gear depends on the tuning of the transmission and the maximum engine RPM, so different vehicles may have varying maximum speeds in first gear. Additional information: Introduction to manual transmission gears: 1. First gear: Starting gear. It has a similar gear ratio to reverse gear and is not suitable for prolonged high-speed operation. Generally, you can shift to second gear once the vehicle gains momentum. 2. Second gear: Passing gear, mainly used for navigating complex road conditions and handling difficult situations, such as sharp-angle (right-angle) turns without special obstacles, crowded urban areas, steep slopes, and bumpy roads. 3. Third gear: Transition gear, primarily used for low-speed driving in urban areas. 4. Fourth gear: Cruising gear, mainly used for extended periods of high-speed and economical driving. Most vehicles achieve their most fuel-efficient speed in the low-speed range of fourth gear. 5. Fifth gear: High-speed gear, mainly used for long-distance highway driving.
15
2
Share

How to Determine a Vehicle's Emission Standard from the Driving License?

To determine a vehicle's emission standard from the driving license, observe the vehicle model number starting with 'bh' on the license: a suffix of 'w' or 'x' indicates China III, 'y' indicates China IV, and 'v' indicates China V emission standards. Vehicle emission standards regulate the permissible levels of harmful gases emitted from automobiles, including carbon monoxide, hydrocarbons, nitrogen oxides, particulates, and soot. Other methods to check a vehicle's emission standard include: 1. Review the Motor Vehicle Conformity Certificate: The vehicle's emission standard is clearly stated in the conformity certificate; 2. Check the Vehicle Delivery Checklist: The emission standard can be found in the vehicle information section; 3. Examine the Certificate of Conformity: The corresponding emission standard is indicated there; 4. Inspect the Vehicle's Environmental Protection Label: The back of the environmental protection label on the vehicle's front windshield clearly marks the vehicle's emission standard.
1
5
Share

Is it harmful to the car if the front wheels are not straightened when parking?

Parking with the front wheels not straightened is harmful to the car, and the harms are: 1. It can damage the steering system, as the steering linkage cannot return to its original position and remains under stress, which accelerates aging over time; 2. It harms the suspension system, as the suspension system tilts in the direction the vehicle is turned, causing the soft-supporting rubber pads and rubber sleeves to constantly bear stress and wear out faster; 3. It accelerates wheel wear, as not straightening the wheels causes the sidewalls of the tires to bear greater stress and deform, speeding up wear on the tire sidewalls. The correct parking sequence: 1. Turn on the right or left turn signal; 2. Lightly press the brake to reduce speed, observe the right-side mirror, and drive to the right; 3. When the speed is low, press the clutch pedal, and pay attention to the surrounding distance when parking; 4. Once the car is completely stopped, shift to neutral, turn off the turn signal, engage the handbrake, and turn off the engine.
14
1
Share

What are the differences between Maxus V80 and V80 Plus?

The differences between Maxus V80 and V80 Plus are as follows: 1. Vehicle class: V80 belongs to the light passenger vehicle category, while V80 Plus is classified as a microvan. The SAIC Maxus V80 is a commercial MPV meticulously developed by SAIC Maxus Automobile Co., Ltd., adhering to European automotive design standards, cutting-edge energy-saving and environmental protection concepts, and combining comfortable driving experience. It is suitable for mobile business, commuting, and tourism, while also serving urban logistics and special industry purposes. 2. Drivetrain: V80 features front-engine, front-wheel drive. In terms of power, the V80 Plus is equipped with the SAIC π 2.0T China VI diesel engine, a star diesel engine independently developed by SAIC Maxus, available in both single turbocharger and twin-turbo versions. The photographed model is equipped with a single turbocharger engine, delivering a maximum power of 139 horsepower and a maximum torque of 330 Nm, with slight differences in power parameters compared to the SAIC Maxus MAXUS V90 2.0T engine. There is also a 2.5T engine version available, with a maximum output of 136 horsepower.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.