What is the operation method of the car handbrake?
3 Answers
The operation method of the car handbrake is: 1. Press the handbrake button and then pull the handbrake; 2. Apply gentle force when pulling the handbrake; 3. The handbrake only needs to be pulled up to 70%, pulling it to the highest point will shorten the service life of the handbrake cable. The function of the handbrake is to brake when parking on flat or sloped surfaces, preventing the vehicle from moving automatically when unattended, thus avoiding traffic accidents. The dangers of forgetting to pull the handbrake while driving include: 1. The brake pump cannot provide sufficient braking force, causing the engine to stall; 2. Accelerated wear of the brake disc and hardening of the brake pads due to friction heat; 3. Elongation of the handbrake cable; 4. Leakage of brake cylinder oil, leading to brake failure.
When parking, I always use the handbrake to prevent accidental sliding. After coming to a complete stop, first press the foot brake, shift the gear to P or neutral, then use my right hand to pull the handbrake lever. Pull it upwards firmly until I hear three or four clear clicks, which indicates it's securely locked. Before driving, I must ensure the foot brake is fully pressed, then use my left hand to press the button on top of the handbrake and gently release it back to its original position. Don't release it abruptly or let the lever slam down, as that can wear out the parts. There's a red handbrake warning light on the dashboard that stays on as a reminder if it's not engaged. I always make it a habit to check if the light is off before starting the car. When parking on a slope, I pull the handbrake tighter or turn the steering wheel towards the curb to let the wheels rest against it for extra safety. A friend once didn't pull it tight enough, and the car rolled into a wall, costing a fortune in repairs. During routine maintenance, I ask the mechanic to check if the handbrake cable is loose. If there's any noise or a feeling of the car rolling, it should be adjusted immediately. Developing good habits ensures safety and peace of mind. It's a simple operation but vital for driving safety.
When learning to drive a manual car, the instructor always emphasizes the handbrake procedure: After starting and stopping, first press the foot brake to stabilize, shift to neutral, then pull the handbrake lever by hand. Listen for 4-5 clicks when pulling, applying moderate force to avoid damaging the cable. When releasing, firmly press the foot brake, press the button, and slowly release it. As a beginner, I often forget to release it before driving, leading to the dashboard red light turning on, insufficient power, and annoying noises—regrettable indeed. On slopes, pull it tighter to assist with starting and prevent rolling back. After each drive, develop a habit of checking the light to ensure it's fully released. Practice more to make it a natural reaction. These operations may seem basic but are crucial safety elements.
