What is the operation method for starting and parking an automatic transmission car?

How to Use the Gears on a Mercedes-Benz A200L?

When entering this gear, the transmission locking mechanism starts working, so the vehicle must be completely stopped before shifting into it. The reverse gear is located behind the parking gear and can only be engaged when the vehicle is stationary. The neutral gear is positioned after the reverse gear. Once engaged, the engine power is disconnected, typically used for short-term parking. Used when the vehicle is moving forward, the drive gear is located below the neutral gear. Uphill sections require more torque than usual; it is recommended to use "D-" to reduce speed and increase torque.

17

1

Share

How to Activate BMW's Voice Assistant?

Enter the car and turn on the central control screen located in the vehicle's center. By clicking on the central control screen, select the option "My Vehicle". After clicking "My Vehicle", enter the task interface, then click "Settings" among the tasks, and find "General Settings" after entering. In the new interface, click the "Language" option, then check the box to use "Hey BMW" to start voice dialogue to complete the setup.

16

0

Share

How to Remove Adhesive from Car Interior?

Use an eraser to gently rub along the edges, gradually working inward to easily remove marks. You can take a dry cloth soaked in vinegar and cover the entire area with double-sided tape marks. Alternatively, you can use heat to soften the adhesive of the double-sided tape. When cleaning, whether using nail polish remover or vinegar, make sure these products completely soak the double-sided tape marks. A mixture of soap, a small amount of ammonia, and turpentine can remove many stains and leave glass surfaces with more shine.

10

4

Share

What to Do When an Electric Vehicle Fails to Start?

Move the assisting vehicle slowly towards the vehicle that cannot start, maintaining an appropriate distance between the two vehicles so that the jumper cables can connect to both batteries. First, connect the positive terminals of both vehicles. After both positive terminals are securely connected, proceed to connect the negative terminals of both vehicles. Keep the assisting vehicle running, then attempt to start the vehicle with the dead battery. First, remove the negative jumper cables from both vehicles, and finally remove the positive jumper cables. The jump-start process is now complete.

11

5

Share

How to reset and clear the maintenance light on a Citroen C5?

Press the first button below the front display (TRIP), and the mileage will be immediately reset to zero. First, navigate the trip computer to the interface that needs to be reset, then press the button at the top of the wiper for more than 5 seconds, and the mileage will be immediately reset to zero. Hold down the button below the front display without releasing, turn to the ON position, a countdown will appear, and once it ends, the maintenance mileage will be automatically reset to zero.

9

1

Share

Is There a Time Limit Between Subject Two and Subject Three?

Generally, there is an interval of about 10-20 days between Subject Two and Subject Three. For applying for a C1 or C2 driver's license, you can schedule Subject Two 10 days after passing Subject One and obtaining the provisional driving permit. To schedule Subject Three, C2 applicants need to wait 20 days after obtaining the provisional driving permit, while C1 applicants need to wait 30 days. Below is an introduction to the content of the driving test subjects: 1. Subject One: The written test on road traffic safety laws, regulations, and related knowledge (Subject One) is conducted on a computer, with a full score of 100. A score of 90 or above (including 90) is required to pass. 2. Subject Two: The field driving skills test (Subject Two) is conducted in a real vehicle on a closed course. Results are either pass or fail. The test includes five mandatory tasks performed in sequence: reversing into a parking space, parallel parking, S-curve driving, right-angle turns, and starting and stopping on a slope. The full score is 100, with a minimum of 80 (including 80) required to pass. 3. Subject Three: The road driving skills test (Subject Three) is conducted on a real road or simulated course in a real vehicle. The full score is 100, with passing scores of 90 or above for large buses, 80 or above for large trucks, and 70 or above for other vehicle types. 4. Subject Four: The written test on safe and civilized driving knowledge (Subject Four) has a full score of 100, with a passing score of 90 or above (including 90).

5

3

Share

What is the operation method for starting and parking an automatic transmission car?

How to Use the Gears on a Mercedes-Benz A200L?

How to Activate BMW's Voice Assistant?

How to Remove Adhesive from Car Interior?

What to Do When an Electric Vehicle Fails to Start?

How to reset and clear the maintenance light on a Citroen C5?

Is There a Time Limit Between Subject Two and Subject Three?

How to Handle a Vehicle's First Traffic Violation?

What is the installation method for snake buckle seat covers?

Can a Motorcycle Driver's License Apply for an Electronic Driver's License?

Do I Need to Drain Water from the Engine at Minus Three Degrees Celsius?